| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
Initialize nr_pages to 1 at the start of each loop iteration, like
folio_referenced_one() does.
Without this, nr_pages computed by a previous folio_unmap_pte_batch() call
can be reused on a later iteration that does not run
folio_unmap_pte_batch() again.
mmap a 64K large folio with MAP_ANONYMOUS | MAP_DROPPABLE, then call
madvise(MADV_FREE), then make the last page device-exclusive via
HMM_DMIRROR_EXCLUSIVE.
Trigger node reclaim through sysfs. Now, in try_to_unmap_one(), we will
first clear the first 15 out of 16 entries mapping the lazyfree folio.
This will set nr_pages to 15. In the next pvmw walk, this nr_pages gets
reused on a device-exclusive pte, thus potentially corrupting folio
refcount/mapcount.
At the moment, I have a userspace program which can make the kernel spit
out a trace, but the blow up is in folio_referenced_one(), because there
are existing bugs in the interaction between device-private and rmap
(which too I am investigating). I did a one liner kernel change to avoid
going into folio_referenced_one(), and the kernel blows up at
folio_remove_rmap_ptes in try_to_unmap_one which is what I wanted.
Note that the bug is there not since file folio batching but lazyfree
folio batching, since device-exclusive only works for anonymous folios.
Userspace visible effect is simply kernel crashing somewhere due to
refcount/mapcount corruption. |
| In NLnet Labs Unbound 1.22.0 up to and including 1.25.1, client terminated DNS-over-QUIC (DoQ) queries are not accounted properly by Unbound resulting in low-cost inflation of the waiting number of replies for already in-flight resolution queries. This results in degradation of resolution service for new clients for already in-flight queries. A malicious actor can exploit the vulnerability by issuing DoQ queries for query names that need resolution and proceeding on immediately terminating the query by one of STOP_SENDING/RESET_STREAM/CONNECTION_CLOSE QUIC frames. Those terminated DoQ queries are not properly counted for and keep inflating the number of waiting replies for in-flight queries. When the maximum is reached, it results in silent query drops for new clients needing resolution for already in-flight queries. This vulnerability needs Unbound to be compiled with DoQ support ('--with-libngtcp2') and the 'quic-port' to be configured for the listening interfaces. Additionally, a malicious actor needs access to multiple source IPs to bypass the by-default configured 'wait-limit' option. |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and 4.1.0.Final through 4.1.135.Final, a remote unauthenticated peer can leak one direct `ByteBuf` per HTTP/2 `DATA` frame in applications that enable HTTP/2 content decompression via `DelegatingDecompressorFrameListener`. When a `DATA` frame is processed for a stream whose decompressor has already been closed, `Http2Decompressor.decompress(...)` calls `decompressor.writeInbound(data.retain())` and does not release the retained buffer on the error path, eventually exhausting direct memory and crashing the JVM. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
aie2_populate_range() jumps back to the again label without calling
mmput(mm), leaking a reference to the mm_struct.
Add the missing mmput() before jumping to again. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: input: hold netns during deferred transport reinjection
Transport-mode reinjection stores a struct net pointer in skb->cb and
uses it later from xfrm_trans_reinject(). That pointer must stay valid
until the deferred callback runs.
Take a netns reference when queueing deferred reinjection work and drop
it after the callback completes. Use maybe_get_net() so the queueing
path does not revive a namespace that is already being torn down.
This keeps the existing workqueue design and fixes the netns lifetime
handling in one place for all users of xfrm_trans_queue_net(). |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803c4
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1. |
| A flaw was found in grub2. When failing to mount an HFS+ grub, the hfsplus filesystem driver doesn't properly set an ERRNO value. This issue may lead to a NULL pointer access. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl()
pppol2tp_ioctl() read sock->sk->sk_user_data directly without any
locks or reference counting. If a controllable sleep was induced during
copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent
socket close could trigger pppol2tp_session_close() asynchronously. This
frees the l2tp_session structure via the l2tp_session_del_work workqueue.
Upon resuming, the ioctl thread dereferences the stale session pointer,
resulting in a Use-After-Free (UAF).
Fix this by securely fetching the session reference using the RCU-safe,
refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the
session's refcount across the sleep. We structured the function to exit
via standard err breaks, guaranteeing that l2tp_session_put() is cleanly
called on all return paths to drop the reference.
To preserve existing behavior we validate the session and its magic
signature only for the specific L2TP commands that require it. This
ensures that generic/unknown ioctls called on an unconnected socket
still return -ENOIOCTLCMD and correctly fall back to generic handlers
(e.g. in sock_do_ioctl()). |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: fix inode reference leak in fsnotify_recalc_mask()
fsnotify_recalc_mask() fails to handle the return value of
__fsnotify_recalc_mask(), which may return an inode pointer that needs
to be released via fsnotify_drop_object() when the connector's HAS_IREF
flag transitions from set to cleared.
This manifests as a hung task with the following call trace:
INFO: task umount:1234 blocked for more than 120 seconds.
Call Trace:
__schedule
schedule
fsnotify_sb_delete
generic_shutdown_super
kill_anon_super
cleanup_mnt
task_work_run
do_exit
do_group_exit
The race window that triggers the iref leak:
Thread A (adding mark) Thread B (removing mark)
────────────────────── ────────────────────────
fsnotify_add_mark_locked():
fsnotify_add_mark_list():
spin_lock(conn->lock)
add mark_B(evictable) to list
spin_unlock(conn->lock)
return
/* ---- gap: no lock held ---- */
fsnotify_detach_mark(mark_A):
spin_lock(mark_A->lock)
clear ATTACHED flag on mark_A
spin_unlock(mark_A->lock)
fsnotify_put_mark(mark_A)
fsnotify_recalc_mask():
spin_lock(conn->lock)
__fsnotify_recalc_mask():
/* mark_A skipped: ATTACHED cleared */
/* only mark_B(evictable) remains */
want_iref = false
has_iref = true /* not yet cleared */
-> HAS_IREF transitions true -> false
-> returns inode pointer
spin_unlock(conn->lock)
/* BUG: return value discarded!
* iput() and fsnotify_put_sb_watched_objects()
* are never called */
Fix this by deferring the transition true -> false of HAS_IREF flag from
fsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt/dir3/
open fd on /mnt/dir1
call rmdir(2) on path "/mnt/dir1"
fsync fd
<trigger power failure>
When attempting to mount the filesystem, the log replay will fail with
an -EIO error and dmesg/syslog has the following:
[445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650
[445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm
[445771.627912] BTRFS info (device dm-0): start tree-log replay
[445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5
[445771.629453] memcg:ffff89f400351b00
[445771.629892] aops:btree_aops [btrfs] ino:1
[445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8
[445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00
[445771.635029] page dumped because: eb page dump
[445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir
[445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5
[445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087
[445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[445771.638097] inode generation 3 transid 9 size 16 nbytes 16384
[445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0
[445771.638100] rdev 0 sequence 2 flags 0x0
[445771.638102] atime 1775744884.0
[445771.660056] ctime 1775744885.645502983
[445771.660058] mtime 1775744885.645502983
[445771.660060] otime 1775744884.0
[445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[445771.660064] index 0 name_len 2
[445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34
[445771.660068] location key (259 1 0) type 2
[445771.660070] transid 9 data_len 0 name_len 4
[445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34
[445771.660076] location key (257 1 0) type 2
[445771.660077] transid 9 data_len 0 name_len 4
[445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[445771.660079] location key (257 1 0) type 2
[445771.660080] transid 9 data_len 0 name_len 4
[445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34
[445771.660082] location key (259 1 0) type 2
[445771.660083] transid 9 data_len 0 name_len 4
[445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160
[445771.660086] inode generation 9 transid 9 size 8 nbytes 0
[445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0
[445771.660088] rdev 0 sequence 2 flags 0x0
[445771.660089] atime 1775744885.641174097
[445771.660090] ctime 1775744885.645502983
[445771.660091] mtime 1775744885.645502983
[445771.660105] otime 1775744885.641174097
[445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14
[445771.660107] index 2 name_len 4
[445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34
[445771.660109] location key (2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix a resource leak in xfs_alloc_buftarg()
In the error path, call fs_put_dax() to drop the DAX
device reference. |
