| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
agp/amd64: Fix broken error propagation in agp_amd64_probe()
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL dereference of "old" filters before change()
Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: stream: fully roll back denied add-stream state
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Prevent NULL deref when RX memory exhausted
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: check for PCI upstream bridge existence
pci_upstream_bridge() returns NULL if the device is on a root bus. If
8821CE is installed in the system with such a PCI topology, the probing
routine will crash. This has probably been unnoticed as 8821CE is mostly
supplied in laptops where there is a PCI-to-PCI bridge located upstream
from the device. However the card might be installed on a system with
different configuration.
Check if the bridge does exist for the specific workaround to be applied.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: reject VJ receive packets on instances with no rstate array
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix end-of-list detection in cgroup_storage_get_next_key()
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb()
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb()
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb()
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When red qdisc has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (red in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(red) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (red). And herein lies the problem.
- red will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full)
[ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq]
[ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d
[ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216
[ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048
[ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078
[ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000
[ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200
[ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000
[ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0
[ 78.671585][ T363] PKRU: 55555554
[ 78.671713][ T363] Call Trace:
[ 78.671843][ T363] <TASK>
[ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq]
[ 78.672148][ T363] ? __pfx__printk+0x10/0x10
[ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0
[ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0
[ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red]
[ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf]
[ 78.673566][ T363] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface". |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: add missing negotiate_features op to Hyper-V ops table
Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by
negotiating supported features") added the .negotiate_features callback
to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot
to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL
on Hyper-V VMs.
During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(),
which unconditionally dereferences hw->mac.ops.negotiate_features().
On Hyper-V this results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...]
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
[...]
Call Trace:
ixgbevf_negotiate_api+0x66/0x160 [ixgbevf]
ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf]
ixgbevf_probe+0x20f/0x4a0 [ixgbevf]
local_pci_probe+0x50/0xa0
work_for_cpu_fn+0x1a/0x30
[...]
Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and
wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP
gracefully. |
