| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Compositing in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in V8 in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node
The setup_cpuhp_and_cpuidle() parses the device tree node for the
interrupt generation block via of_parse_phandle() and decrements its
reference count using of_node_put() immediately after fetching the resource
address. However, later the intr_gen_node pointer is passed into
of_syscon_register_regmap().
Fix this by declaring intr_gen_node with __free() and removing
of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173
tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291
tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325
...
When a lock class is zapped (e.g. during module unload or key
unregistration), zap_class() clears the class's bit in
lock_classes_in_use and removes it from the class hash table.
However, existing lockdep_map instances embedded in data structures
may still retain a pointer to the zapped class in their class_cache[]
array.
When __lock_acquire() subsequently runs on such a lock, it finds
lock->class_cache[subclass] != NULL, skipping register_lock_class()
and assigning hlock->class_idx to the index of the zapped class. When
check_wait_context() or hlock_class() inspects the held_lock, it finds
!test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if
the zapped slot is subsequently re-allocated to an unrelated lock key,
the stale class_cache entry would erroneously match the unrelated
class (ABA issue).
Add lock_class_cache_is_valid() to validate that the cached class is
within lock_classes bounds, still allocated in lock_classes_in_use
(using uninstrumented arch_test_bit() in __always_inline context so it
is safe in noinstr contexts like match_held_lock()), and that
class->key matches the expected subkey (taking lockdep_set_subclass()
overrides into account). Also use READ_ONCE()/WRITE_ONCE() when
accessing class_cache[]. If the entry is invalid or stale, fall back
to register_lock_class() / look_up_lock_class(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: 6fire: Avoid embedded URBs
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset(). |
| Use-after-free vulnerability in VFS in Google gVisor prior to release 20260831.0 on all platforms allows a local attacker with standard container privileges to achieve code execution in the host sentry process by double-freeing the backing MemoryFile from an in-sandbox overlay filesystem. The sentry process remains confined by host-level Linux seccomp and namespace boundaries. |
| A flaw was found in DPDK lib/vhost vhost-crypto. Session cleanup can leave a stale cached session pointer, and the data path does not check the session type before attaching it, leading to use-after-free or type confusion in the host vhost-crypto backend. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve inner map identity in callback frames
Callback frame constructors initialize map-typed argument registers with
__mark_reg_known_zero() and then restore map_ptr. This clears map_uid,
which is the only field distinguishing inner maps that share an
inner_map_meta template.
When a timer callback invokes bpf_for_each_map_elem() on a second inner
map, both the saved first map and the second map value can reach the nested
callback as the same template with map_uid zero. bpf_timer_init() then
accepts pairing the timer from the second map with the first map.
The runtime records the first map in the timer without taking a reference.
Freeing that map does not find the timer stored in the second map, so a
later timer callback dereferences the freed map.
Copy map_uid from the same caller register as map_ptr when constructing
for-each, timer/workqueue, and task-work callback arguments. The existing
identity check can then reject mismatched inner maps while allowing a
callback value to be paired with its actual map. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode->i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails
When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE,
it creates a replacement listener cm_id and returns 1, telling
the CM core to destroy the old one. If the replacement allocation
fails, sc_cm_id still points at the old cm_id that the CM core is
about to destroy. Any subsequent dereference of sc_cm_id --
such as svc_rdma_detach()'s rdma_disconnect() call -- is a
use-after-free.
NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s
rdma_disconnect() call against NULL so that the listener can
be torn down safely when the server shuts down. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: avoid unlocked f6i_list walk in nh_rt_cache_flush
nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop
replace without holding nh->lock, racing the unlocked IPv6 route
add/delete that mutate the list under nh->lock and free fib6_info
entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()):
BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
Read of size 8 at addr ffff888012953e18 by task exploit/146
nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
replace_nexthop (net/ipv4/nexthop.c:2610)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Unlike the other f6i_list walks, this one bumps each route's sernum via
fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock
around it would invert the established tb6_lock -> nh->lock order and
deadlock. As the only purpose is to invalidate cached dsts, bump the
IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead,
mirroring the rt_cache_flush() already done for IPv4 just above. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
net/liquidio: drop cached VF pci_dev LUT
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
