| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic to or through a dataplane interface. Repeated attempts to trigger this condition result in the firewall entering maintenance mode.
Cloud NGFW and Panorama are not affected by this vulnerability. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, the optimized AMQP 1.0 server_mode parser in deps/amqp10_common/src/amqp10_binary_parser.erl matches the textual prefixes of symbolic data, sequence, and value body descriptors without verifying their encoded symbol lengths. An authenticated AMQP 1.0 publisher with write permission can submit a well-formed unknown descriptor that begins with a registered body descriptor, and RabbitMQ misclassifies and stores the bytes as a standard body section. Strict AMQP 1.0 consumers can terminate while decoding the stored entry. For bodies misclassified as data, AMQP 0-9-1 or other cross-protocol conversion performs full body decoding and can terminate the consumer protocol process, with acknowledgement-required delivery permitting repeated failures. Sequence and value classifications are normally transported as opaque encoded payloads on that conversion path. The broker remains alive, and the issue does not bypass routing or authorization. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4. |
| An improper input handling vulnerability in the GlobalProtect™ gateway of Palo Alto Networks PAN-OS software enables an authenticated user to establish a GlobalProtect session using the identity of another user.
Cloud NGFW and Panorama are not affected by this vulnerability. |
| A stack-based buffer overflow vulnerability in the log processing functionality of Palo Alto Networks PAN-OS® software on Panorama enables an attacker to cause a denial of service (DoS) condition. Repeated attempts to trigger this condition result in the Panorama entering maintenance mode.
Cloud NGFW, Prisma® Access, and standalone PAN-OS firewalls are not affected by this vulnerability. |
| A denial of service vulnerability in Palo Alto Networks PAN-OS software enables an authenticated user with a read-only administrator role to cause a denial of service (DoS) condition by sending a specially crafted API request.
The security risk posed by this issue is significantly minimized by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
Cloud NGFW, Panorama, and Prisma® Access are not affected by this vulnerability. |
| libp2p is a JavaScript implementation of the libp2p networking stack. Prior to 6.0.28, the @libp2p/webrtc webRTCDirect() Node.js listener processes unauthenticated STUN Binding Requests before PeerId authentication, Noise, muxing, protocol negotiation, connection creation, or connection-manager admission. The listener in packages/transport-webrtc/src/private-to-public/utils/stun-listener.ts forwards the packet-controlled request.ufrag into DirectRTCPeerConnection.setLocalDescription, where the value is reused as an ICE password without validating its required length and character set. A short credential causes node-datachannel or libdatachannel to raise an uncaught native invalid_argument and abort the process with SIGABRT, allowing a single remote UDP packet to deny service. The confirmed impact is process termination only, with no demonstrated memory corruption, code execution, browser impact, confidentiality impact, integrity impact, or connection-limit bypass. This issue is fixed in version 6.0.28. |
| kin-openapi is a Go project for handling OpenAPI files. Prior to 0.148.0, the OpenAPI 3.1 validation path passes YAML NaN and infinity numeric values to santhosh-tekuri/jsonschema v6.0.2 without applying kin-openapi's existing finite-number guards. A remote unauthenticated client can send an application/yaml or application/x-yaml request body containing .nan, .inf, or -.inf to an operation with a numeric constraint, causing the dependency to create and dereference a nil big.Rat during ValidateRequest. Standard net/http servers recover the panic per connection, while other hosts or application goroutines may terminate the process. This issue is fixed in version 0.148.0. |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. |
| undici is an HTTP client library for Node.js. In versions 8.11.0 and 8.11.1, its experimental WebSocket client, which is enabled by default when HTTP/2 is allowed, mishandles a failed WebSocket handshake over HTTP/2: the request is already marked completed, so the abort becomes a no-op and the underlying HTTP/2 stream is left open with no error listener. When a malicious server then destroys the connection, the orphaned stream emits an unhandled error and the Node.js process exits. A remote, unauthenticated server can therefore crash any client that opens a WebSocket to it over HTTP/2, resulting in a denial of service. The issue is fixed in undici 8.11.2, and users should upgrade to 8.11.2 or later. As a workaround, set allowH2 to false to disable HTTP/2 for WebSocket connections, or avoid opening WebSocket connections to untrusted servers. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear buf on error in __bpf_get_task_stack
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: do not leak an hci_conn when a second LE connect is rejected
create_le_conn_complete() decides whether the failed connection is
still pending by comparing it against hci_lookup_le_connect(), which
returns the first LE connection in BT_CONNECT. That is the same
connection only while at most one is pending.
Two can be pending. Connections created on the passive scan path sit
in BT_CONNECT with HCI_CONN_SCANNING set and are invisible to
hci_lookup_le_connect() until hci_le_create_conn_sync() clears the
flag when their command is issued, so the -EBUSY guard in
hci_connect_le() does not prevent a second connection from being
queued while the first is still on the scan path. Whenever two
connections are in BT_CONNECT at once, the lookup may return one
connection while create_le_conn_complete() is reporting the failure
of the other; the early exit then drops the error and hci_conn_failed()
never runs on the connection that failed.
The controller also rejects a second HCI_OP_LE_CREATE_CONN issued
while another connection creation is still outstanding, per Core Spec
Vol 4, Part E. The spec calls for Command Disallowed there; the
bcm43438 observed here answers with an LMP/LL error code instead,
which bt_to_errno() maps to the -EPROTO (-71) in the log below.
The leaked connection stays in BT_CONNECT forever, and because
hci_connect_le() refuses to dial while hci_lookup_le_connect() finds
anything, every subsequent attempt to reach any peer fails with
-EBUSY and no command reaches the controller at all.
Seen on a bcm43438 with two BLE peers polled on the same interval
(state 5 is BT_CONNECT; both handles are UNSET ones, allocated from
the ida above HCI_CONN_HANDLE_MAX):
Bluetooth: hci1: Opcode 0x2013 failed: -71
# hcitool con
< LE 14:9C:EF:03:68:81 handle 3840 state 5 lm CENTRAL
< LE C4:D3:6A:8C:B5:38 handle 3841 state 5 lm CENTRAL
A btmon capture across the next ten minutes of connect attempts
contains no HCI_OP_LE_CREATE_CONN at all; outgoing LE connections
do not recover until the adapter is reset. With this change the same
scenario fails the rejected connection cleanly and further connects
to both peers go through.
Ask about the connection itself instead of about the device. |
| Nullsoft Scriptable Install System (NSIS) before 3.11 on Windows allows local users to escalate privileges to SYSTEM during an installation, because the temporary plugins directory is created under %WINDIR%\temp and unprivileged users can place a crafted executable file by winning a race condition. This occurs because EW_CREATEDIR does not always set the CreateRestrictedDirectory error flag. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Fix race between SR-IOV enable/disable and hotplug
Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback. |
| An issue was discovered in libexpat before 2.6.4. There is a crash within the XML_ResumeParser function because XML_StopParser can stop/suspend an unstarted parser. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated). |
| A vulnerability in input validation exists in curl <8.0 during communication using the TELNET protocol may allow an attacker to pass on maliciously crafted user name and "telnet options" during server negotiation. The lack of proper input scrubbing allows an attacker to send content or perform option negotiation without the application's intent. This vulnerability could be exploited if an application allows user input, thereby enabling attackers to execute arbitrary code on the system. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
On MX Series with SPC3 line-card and source NAT configuration, when a specific malformed IPv6 packet is received, it is not dropped but instead a session is created and NAT resources are allocated. Continued receipt of such packets will eventually lead to session or resource exhaustion, which will impact all traffic through the device. To recover the device needs to be rebooted.
To monitor session usage, use the following:
show services sessions summary
To monitor source NAT resource usage, use the following:
show services nat pool
This issue affects Junos OS on MX Series with SPC3:
* All versions before 23.2R2-S4;
* 23.4 versions before 23.4R2-S5;
* 24.2 versions before 24.2R2. |
| The ssl3_get_key_exchange function in s3_clnt.c in OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k allows remote SSL servers to conduct RSA-to-EXPORT_RSA downgrade attacks and facilitate brute-force decryption by offering a weak ephemeral RSA key in a noncompliant role, related to the "FREAK" issue. NOTE: the scope of this CVE is only client code based on OpenSSL, not EXPORT_RSA issues associated with servers or other TLS implementations. |
| A remote user who can read encrypted objects in the S3 bucket can force a padding downgrade by altering the padding scheme recorded in an object's metadata to legacy PKCS#1 v1.5. Since this padding scheme is susceptible to the well-known Bleichenbacher attack, the user can use a PKCS#1 v1.5 padding oracle to recover the RSA-wrapped envelope key and decrypt the object.
To remediate this issue, we recommend that users upgrade to version 3.2.2 or 4.0.3. The 1.x and 2.x lines will not be patched, users of those lines need to migrate to 3.2.2 or 4.0.3. |
| Improper state validation in Autofill AI in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
