| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| undici is an HTTP client library for Node.js. In versions 6.23.0 through 6.29.0, 7.18.0 through 7.30.0, and 8.0.0 through 8.12.1, its fetch() implementation crashes the Node.js process when a malicious server returns a response with more than five content codings and closes the connection before sending the body. undici rejects such responses because of a content-encoding limit, but it created the internal response stream before that check and returned without attaching an error listener or aborting the request, so the early close surfaces a content-length mismatch on the orphaned stream, which Node.js treats as an unhandled error and terminates the process. A remote, unauthenticated server can trigger this with a single response, even when the application correctly catches the fetch() rejection, resulting in a denial of service. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, and users should upgrade to one of those versions or later. There is no workaround. |
| The Link Layer Control Procedure (LLCP) implementation of the Zephyr software Bluetooth LE Controller retains the receive node that carried an accepted LL_PHY_UPDATE_IND so that it can later be reused for the host notification when the update instant is reached (llcp_rx_node_retain() in subsys/bluetooth/controller/ll_sw/ull_llcp.c, and the node is deliberately not recycled while marked NODE_RX_TYPE_RETAIN). The invalid-PDU arms of llcp_lp_pu_rx() and llcp_rp_pu_rx() in subsys/bluetooth/controller/ll_sw/ull_llcp_phy.c completed the procedure via llcp_lr_complete() / llcp_rr_complete() without first releasing that retained node, so the procedure context — the only remaining reference to the node — was freed while the node was still held out of the receive pool.
A peer device on an established LE connection can drive this deterministically and without pairing or encryption. Against a peripheral it sends LL_PHY_REQ, receives LL_PHY_RSP, sends a valid LL_PHY_UPDATE_IND with an instant a few connection events in the future (so the node becomes retained), and then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ; ull_cp_rx() routes it to the active remote PHY Update procedure, which takes the invalid-PDU path. The mirror case applies to a locally initiated PHY Update followed by an LL_REJECT_IND.
In the default configuration (CONFIG_BT_ASSERT and CONFIG_BT_CTLR_ASSERT_DEBUG both default y) the violated invariant in llcp_lr_check_done() / llcp_rr_check_done() triggers a controller assertion, ending in k_oops() (or k_panic()) — a single crafted PDU sequence from radio range faults the device. With those assertions compiled out, each attempt silently leaks one receive PDU node and its memq link; because the controller receive pool is small (PDU_RX_CNT, driven by CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1) and each attempt costs the attacker only a reconnect, a few repetitions exhaust the pool and leave Bluetooth inoperable until reboot. On releases v3.4.0 through v3.7.x the assertion is never reached, whatever the configuration, so every attempt leaks silently.
The impact is limited to availability: the orphaned node leaves no dangling pointer that is later dereferenced and is never delivered to the host, so there is no memory corruption or information disclosure. The same pull request applies the identical release to the Connection Update and CIS-create procedures, whose invalid-PDU arms had the same omission. |
| An Incomplete Cleanup vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows a configured MVPN neighbor to cause a denial of service via a BGP MVPN update when an inter‑region segmented VRF with 'protocols mvpn inter-region-template' is configured. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| The Bluetooth Link Layer control procedure code in subsys/bluetooth/controller/ll_sw/ull_llcp_conn_upd.c retains the received RX node while a Connection Update / Connection Parameter procedure waits for its instant, so the node can later carry the host notification (llcp_rx_node_retain(), which marks it NODE_RX_TYPE_RETAIN and thereby suppresses the normal recycling in ull.c). The default: arm of llcp_rp_cu_rx() and llcp_lp_cu_rx() — the "invalid PDU, terminate the connection" path — completed the procedure without releasing that retained node. llcp_rr_check_done() then dequeued and freed the procedure context with ctx->node_ref.rx still pointing at the retained node, dropping the last reference to it.
A peer device in radio range can reach this without pairing, bonding, or encryption. Against a peripheral, the peer sends a well-formed LL_CONNECTION_UPDATE_IND with an instant a few connection events in the future (the node is retained and the procedure enters RP_CU_STATE_WAIT_INSTANT), then, before the instant is reached, sends any other LL Control PDU such as LL_LENGTH_REQ. ull_cp_rx() routes that PDU into the active remote Connection Update procedure, which takes the invalid-PDU path. The central role is reachable symmetrically after accepting an LL_CONNECTION_PARAM_REQ, and the local-procedure variant is reachable with LL_REJECT_IND.
With CONFIG_BT_CTLR_ASSERT_DEBUG enabled (its default), the resulting state violates the invariant asserted in llcp_rr_check_done(), so the two-PDU sequence produces an immediate fatal error in the controller. With those asserts disabled, each occurrence permanently loses one node from the controller's small fixed RX pool (sized from CONFIG_BT_CTLR_RX_BUFFERS, which defaults to 1); repeating the sequence across reconnections exhausts the pool, after which the link-layer receive path operates on a NULL node. The impact is an unauthenticated, remotely triggerable denial of service persisting until reboot; there is no memory-disclosure or memory-corruption consequence, since the leaked node simply becomes unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix page fault in XDP TX timestamps handling
If an XDP application that requested TX timestamping is shutting down
while the link of the interface in use is still up the following kernel
splat is reported:
[ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008
...
[ 883.803650] [ T1554] Call Trace:
[ 883.803652] [ T1554] <TASK>
[ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc]
[ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc]
...
During shutdown of the TX ring the xsk_meta pointers are left behind, so
that the IRQ handler is trying to touch them.
This issue is now being fixed by cleaning up the stale xsk meta data on
TX shutdown. TX timestamps on other queues remain unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always walk all pending catchall elements
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..] |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog
da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(),
when the watchdog is left running by the driver sets
WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the
device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be
executed in da9063_wdt_suspend. In this case, the suspend callback is
a no-op and the watchdog keeps counting during system suspend,
leading to an unexpected system reset.
Check WDOG_HW_RUNNING and wdd，can fix this issue. |
| A flaw was found in OpenSSH. With GSSAPI authentication enabled, a failed GSSAPI attempt can leave delegated credentials stored for the connection even though user authorization did not succeed. A later successful login on that connection is not authorized by the leftover state. |
| Code for IBM i is a Visual Studio Code extension for maintaining and compiling ILE languages on the IBMi platform. Prior to 3.0.1, src/ui/views/objectBrowser.ts stores Object Browser downloads and the edit-save flow content in the shared /tmp directory without reliable cleanup. On systems where /tmp is accessible to other local accounts, file contents remain readable after download or editing operations. This issue is fixed in version 3.0.1. |
| Incomplete cleanup vulnerability in ABB My Control System.
This issue affects My Control System: 26.4 and 26.5. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: fix stale descriptor flags after a failed packed add
In a packed ring the AVAIL and USED bits sit in the descriptor itself,
so writing them makes that descriptor available. Those bit combinations
flip meaning on every round of the ring, tracked by a wrap counter, so
invalidating or validating a descriptor means inverting both bits.
Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has
virtqueue_add_packed() make every descriptor of a chain available as it
maps the chain, and write the head last. The device consumes the ring in
order and stops at a head that is not available yet, so it never reaches
the rest.
When vring_map_one_sg() fails partway, unmap_release unmaps the segments
and restores avail_used_flags, but the descriptors it wrote to in the
ring stay marked with AVAIL and USED bits. The head is now the only
entry that keeps the device from consuming these stale entries.
For example, the ring would look like this now.
Z - pre-previous command
A - previous command
B - aborted command
C - current command
[A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE]
When the driver now attempts to issue the C command, the next add starts
at the same head as B. If C spans less descriptors than B, there is no
end marker because AVAIL and USED bits were still in place. And that
means the device will start interpreting these stale entries (B2/B3) as
another command entry, which then blocks the queue.
This effect typically happens in swiotlb configurations under memory
pressure, because vring_map_one_sg() can then fail with larger I/O
requests which then leads to command abortions.
There are broadly 2 ways to avoid leaving those flags behind:
1) Defer those flags too until the chain is complete.
2) Rewrite those flags for the previous wrap counter.
Implement the second option in both packed add paths. The first option
traverses the chain a second time on every successful add. The second
option invalidates all added descriptors when any add fails.
With this patch applied, a packed virtqueue keeps completing requests
after a failed add. |
| VeraCrypt 1.26.29 (FUSE-T build) on macOS sometimes allows unintended access to decrypted data. It does not terminate the FUSE-T auxiliary service (go-nfsv4) and its associated VeraCrypt core-service helper processes when a volume is dismounted. After VeraCrypt reports the volume as dismounted, the auxiliary mount continues to serve the decrypted volume image (volume.dmg) over a loopback SMB session, and the leaked processes retain an open handle to the underlying raw device. A local user or process can therefore remount and access the decrypted volume without the passphrase, e.g., by reopening a previously accessed path (such as through a macOS Open Recent menu) or by attaching volume.dmg from the stale auxiliary mount. (The macFUSE build of VeraCrypt is not affected.) |
| In the Linux kernel, the following vulnerability has been resolved:
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: handle zerocopy send cleanup before the message is queued
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_helper: pass helper to expect cleanup
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix ordering of qlen adjustment
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen
_before_ a call to said function because otherwise it may fail to notify
parent qdiscs when the child is about to become empty. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: set dormant flag on hook register failure
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core. |
