| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. |
| A vulnerability has been found in Calix GigaSpire 26.1.0. The affected element is an unknown function of the file traceroute.cmd. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The presence of this vulnerability remains uncertain at this time. The vendor explains: "After reviewing the researcher's videos, we repeated the test using his described setup: the traceroute cancel request was sent while a second client was connected to the EWI. The second client remained connected and was not interrupted, and we did not observe a forced logout, session invalidation, or loss of EWI availability." |
| A flaw has been found in Calix GigaSpire 26.1.0. Impacted is an unknown function of the file utilities_configurationsave.cgi of the component Web Management Interface. Executing a manipulation of the argument sessionKey can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The existence of this vulnerability is still disputed at present. The vendor explains: "We reproduced the reported request pattern. The observed delay results from expected input-timeout handling while the handler waits for input data. We did not observe a backend crash, resource exhaustion, service instability, or loss of EWI availability, and the interface remained accessible during and after testing." |
| FreeRDP from 3.0.0 before 3.32.0 contains an uncontrolled resource consumption vulnerability in parse_nla_mode_pdu that allows unauthenticated attackers to exhaust server memory. Attackers can complete TLS and stream bytes not beginning with the DER SEQUENCE tag 0x30, causing unbounded receive buffer growth before NLA authentication. |
| FreeRDP from 2.0.0 before 3.32.0 contains an unbounded reassembly vulnerability in WTSProcessChannelData that fails to enforce cumulative fragment limits. Authenticated clients can start a static virtual channel message, withhold the LAST flag, and send endless fragments to exhaust server memory. |
| A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory. |
| A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix out_fput in iommufd_fault_alloc()
As fput() calls the file->f_op->release op, where fault obj and ictx are
getting released, there is no need to release these two after fput() one
more time, which would result in imbalanced refcounts:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230
Call trace:
refcount_warn_saturate+0x60/0x230 (P)
refcount_warn_saturate+0x60/0x230 (L)
iommufd_fault_fops_release+0x9c/0xe0 [iommufd]
...
VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd])
WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0
Call trace:
filp_flush+0x3c/0xf0 (P)
filp_flush+0x3c/0xf0 (L)
__arm64_sys_close+0x34/0x98
...
imbalanced put on file reference count
WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138
Call trace:
__file_ref_put+0x100/0x138 (P)
__file_ref_put+0x100/0x138 (L)
__fput_sync+0x4c/0xd0
Drop those two lines to fix the warnings above. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Implement ref count for SRB
The timeout handler and the done function are racing. When
qla2x00_async_iocb_timeout() starts to run it can be preempted by the
normal response path (via the firmware?). qla24xx_async_gpsc_sp_done()
releases the SRB unconditionally. When scheduling back to
qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed
sp->qpair pointer:
qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21.
qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21
qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400.
qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5
BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx]
Obvious solution to this is to introduce a reference counter. One reference
is taken for the normal code path (the 'good' case) and one for the timeout
path. As we always race between the normal good case and the timeout/abort
handler we need to serialize it. Also we cannot assume any order between
the handlers. Since this is slow path we can use proper synchronization via
locks.
When we are able to cancel a timer (del_timer returns 1) we know there
can't be any error handling in progress because the timeout handler hasn't
expired yet, thus we can safely decrement the refcounter by one.
If we are not able to cancel the timer, we know an abort handler is
running. We have to make sure we call sp->done() in the abort handlers
before calling kref_put(). |
| undici is an HTTP client library for Node.js. In versions 5.15.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its WebSocket client, including the bundled WebSocket exposed by Node.js, can be driven to exhaust process memory by a malicious or compromised WebSocket server. For every PING frame received, the client automatically writes a PONG response and ignores the backpressure signal from the socket write, so a server that streams small PING frames while never reading the client's PONGs makes the outbound write queue and heap grow without bound until the Node.js process runs out of memory and terminates. The attack is remote and unauthenticated, needs only a normal WebSocket connection, and is asymmetric, since small inbound PINGs produce a much larger retained outbound queue, with availability the only impact. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which pause WebSocket frame parsing when the automatic PONG response hits socket backpressure and resume on drain, bounding the outbound queue, and users should upgrade to one of those versions or later. There is no workaround. |
| AdonisJS HTTP Server is a package for handling HTTP requests in the AdonisJS framework. Prior to 8.2.2 and 9.1.1, the regular expression returned by router.matchers.slug() contains adjacent greedy repetitions with overlapping character classes. When an application applies this matcher to an attacker-controlled route parameter, a long slug ending in a character rejected by the final assertion causes quadratic backtracking and excessive CPU use. Route matching occurs before route and group middleware, so authentication or rate-limiting middleware attached to the route may not prevent an unauthenticated request from blocking the Node.js event loop and stopping the worker from serving unrelated requests or health checks. This issue is fixed in versions 8.2.2 and 9.1.1. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, mechanisms/1 applied list_to_atom/1 to every colon-delimited token in an attacker-controlled auth_mechanism value, permanently consuming Erlang VM atoms and allowing the node to be crashed with a large request. Exploitation requires the Shovel or Federation plugin to be in use, and setting auth_mechanism requires the policymaker tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| FreeRDP before 3.32.0 fails to close prior serial handles in serial_process_irp_create, allowing a malicious RDP server to exhaust file descriptors. Attackers can send repeated serial IRP_MJ_CREATE requests to accumulate descriptors and terminate the client at the CommReadFile FD_SETSIZE assertion. |
| In sshd and ssh in OpenSSH before 10.6, there is no check for whether the maximum packet length is exceeded during decompression of highly compressed data. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex_core allows an untrusted repository mirror, or a server answering hex_core's API requests, to exhaust the memory of the Erlang VM running hex_core. The same code is vendored in Hex (mix_hex_repo, mix_hex_api) and rebar3 (r3_hex_repo, r3_hex_api).
hex_repo:get_names/1, hex_repo:get_versions/1, hex_repo:get_package/2 and hex_repo:get_policy/2 decompress the registry response with zlib:gunzip/1 and decode the signed envelope before verifying its signature. A mirror doesn't have the repository's private key, but it chooses the compressed bytes, so a small response decompresses into an envelope of any size before the signature check rejects it.
hex_api decodes responses with the application/vnd.hex+erlang content type through hex_safe_binary_to_term:safe_binary_to_term/1, which calls binary_to_term(Binary, [safe]). The safe option prevents atom creation, but it accepts compressed terms and doesn't limit the size of the decoded term, and the check that rejects functions and ports runs after the term has been built. The fix for CVE-2026-21619 added the safe option and that check without bounding the decoded size.
This issue affects rebar3: from 3.9.1 before 3.27.3; hex: from 2.1.0 before 2.5.2; hex_core: from 0.1.0 before 0.20.0. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.145.0 until 0.146.0, openapi3filter repeatedly calls regexp.MustCompile for the same parameter-name regular expression inside the per-query-key loop in urlValuesDecoder.DecodeObject used to decode a deepObject query parameter. An unauthenticated remote client can send an affected endpoint a request containing many unrelated query keys, causing ValidateRequest to perform work and allocations proportional to the attacker-controlled key count for every deepObject parameter. The expression itself is fixed and this is not regular expression denial of service; the resource consumption comes from loop-invariant recompilation. This issue is fixed in version 0.146.0. |
| A flaw was found in openshift/oauth-server. The OAuth login and error page endpoints pass the unauthenticated Accept-Language header to golang.org/x/text/language.ParseAcceptLanguage() without input validation. A bypass of the CVE-2022-32149 mitigation exists: the upstream guard counts only '-' characters but the internal BCP 47 scanner aliases '_' to '-' after the guard check. An unauthenticated attacker can send a crafted Accept-Language header using '_' separators to trigger quadratic-time parsing, consuming excessive CPU and denying authentication to all cluster users. |
| A denial of service vulnerability exists in the XML parsing of multiple versions of OpenNMS Meridian and Horizon. OpenNMS parsed XML without an effective limit on entity expansion. A document with a DOCTYPE that declares internal entities can expand to a very large value and exhaust the server memory. An authenticated user with provisioning access can supply such a document through a requisition or foreign-source import, which includes a remote requisition URL that the server fetches and parses. Both deeply nested entities and a single large entity referenced many times cause the memory exhaustion. The fix caps the number of entity expansions for all XML parsing and rejects any DOCTYPE in requisition and foreign-source XML.
The solution is to upgrade to Meridian 2024.3.14, 2025.0.11, 2026.0.1 and Horizon 36.0.5 or newer. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet. |
