| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.11, the unauthenticated WebGUI login usernamefld accepts carriage-return and line-feed characters that survive LOG_AUTH processing through syslog-ng-lockout.conf into the syslog-ng program destination feeding lockout_handler. The consumer's readline() processing treats an injected fragment as a separate authentication event and selects the first syntactically valid IP address from the forged line. An attacker with network access to the login page can forge failure events for another IP, causing that IP to be added to the sshlockout PF table and its active states to be killed, or forge accepted events that reset an attacker's own brute-force counter. This can block administrative, DNS, gateway, or monitoring addresses and can bypass password-guessing lockout without authentication. This issue is fixed in version 26.1.11. |
| Memory corruption in SVG in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to read memory via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: validate checksum_start before completing checksum
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: iosm: bound device offsets in the MUX downlink decoder
mux_dl_adb_decode() walks a chain of aggregated datagram tables using
offsets and lengths taken from the modem. first_table_index,
next_table_index, table_length, datagram_index and datagram_length are
all device supplied le values. Only first_table_index was checked, and
only for being non zero. The decoder then formed adth = block +
adth_index and read the table header and the datagram entries with no
bound against the received skb. A modem that reports an index or a
length past the downlink buffer makes the decoder read out of bounds.
The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most
that, so skb->len is the real limit, but none of these in band offsets
were checked against it.
The table chain is also followed with no forward progress check. The loop
takes the next table from adth->next_table_index and stops only when that
reaches zero. A modem can stage two tables that point at each other, so
the loop never ends. It runs in softirq and clones the skb on every pass.
Validate every device offset and length against skb->len before use.
The block header must fit. Each table header, on entry and after every
next_table_index, must lie inside the skb. The datagram table must fit.
Each datagram index and length must stay inside the skb. The header
padding must not exceed the datagram length so the receive length does
not wrap. Require each next_table_index to move forward so the chain
cannot cycle.
This was reproduced under KASAN as a slab out of bounds read on a normal
downlink receive once the iosm net device is up. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_ioctl() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| Out-of-bounds write in libsmkvextractor.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report()
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root. |
| Memory corruption in DOM in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Memory corruption in Core in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to read memory via a crafted HTML page. (Chromium security severity: High) |
| Memory corruption in V8 in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Memory corruption in Workers in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| An output escaping vulnerability in the Audit Logs component of Crafty Controller allows a remote, unauthenticated attacker to perform stored cross-site scripting via HTTP header injection |
| BottleCRM 0.30 through 1.14.5 contains an HTML injection vulnerability in render_invoice_template() that allows authenticated organization members to inject markup into custom-template invoice PDFs. Attackers can place HTML and CSS in notes, terms, client name or address fields to overlay totals, payee and payment instructions in PDFs served via download, public links and emails. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb->data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so plain disconnects,
roams and interface teardowns trigger it on real networks.
The memset is redundant: the whole buffer is zeroed right after
allocation, so the frame sent to the device is byte-identical
without it. Drop the else branch; normal operation is unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix missing iov bounds check in parse_posix_sids()
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound. |
| Incorrect boundary conditions in the Layout component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Incorrect boundary conditions in the Layout component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. |
