Total
88 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-44487 | 32 Akka, Amazon, Apache and 29 more | 313 Http Server, Opensearch Data Prepper, Apisix and 310 more | 2025-06-11 | N/A | 7.5 HIGH |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. | |||||
| CVE-2024-20294 | 1 Cisco | 247 Firepower 4110, Firepower 4112, Firepower 4115 and 244 more | 2025-05-21 | N/A | 6.6 MEDIUM |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). | |||||
| CVE-2024-20291 | 1 Cisco | 81 Nexus 3000 In Standalone Nx-os Mode, Nexus 3048, Nexus 31108pc-v and 78 more | 2025-04-30 | N/A | 5.8 MEDIUM |
| A vulnerability in the access control list (ACL) programming for port channel subinterfaces of Cisco Nexus 3000 and 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to send traffic that should be blocked through an affected device. This vulnerability is due to incorrect hardware programming that occurs when configuration changes are made to port channel member ports. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access network resources that should be protected by an ACL that was applied on port channel subinterfaces. | |||||
| CVE-2015-4324 | 1 Cisco | 27 Nexus 1000v, Nexus 3016, Nexus 3048 and 24 more | 2025-04-12 | 6.1 MEDIUM | N/A |
| Buffer overflow in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 7.3(0)ZN(0.81), Nexus 3000 devices 7.3(0)ZN(0.81), Nexus 4000 devices 4.1(2)E1(1c), Nexus 7000 devices 7.2(0)N1(0.1), and Nexus 9000 devices 7.3(0)ZN(0.81) allows remote attackers to cause a denial of service (IGMP process restart) via a malformed IGMPv3 packet that is mishandled during memory allocation, aka Bug IDs CSCuv69713, CSCuv69717, CSCuv69723, CSCuv69732, and CSCuv48908. | |||||
| CVE-2015-4323 | 1 Cisco | 28 Mds 9000 Nx-os, Nexus 1000v, Nexus 3016 and 25 more | 2025-04-12 | 6.1 MEDIUM | N/A |
| Buffer overflow in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 7.3(0)ZN(0.9); Nexus 3000 devices 6.0(2)U5(1.41), 7.0(3)I2(0.373), and 7.3(0)ZN(0.83); Nexus 4000 devices 4.1(2)E1(1b); Nexus 7000 devices 6.2(14)S1; Nexus 9000 devices 7.3(0)ZN(0.9); and MDS 9000 devices 6.2 (13) and 7.1(0)ZN(91.99) and MDS SAN-OS 7.1(0)ZN(91.99) allows remote attackers to cause a denial of service (device outage) via a crafted ARP packet, related to incorrect MTU validation, aka Bug IDs CSCuv71933, CSCuv61341, CSCuv61321, CSCuu78074, CSCut37060, CSCuv61266, CSCuv61351, CSCuv61358, and CSCuv61366. | |||||
| CVE-2015-4237 | 1 Cisco | 38 Mds 9100, Mds 9140, Mds 9500 and 35 more | 2025-04-12 | 4.6 MEDIUM | N/A |
| The CLI parser in Cisco NX-OS 4.1(2)E1(1), 6.2(11b), 6.2(12), 7.2(0)ZZ(99.1), 7.2(0)ZZ(99.3), and 9.1(1)SV1(3.1.8) on Nexus devices allows local users to execute arbitrary OS commands via crafted characters in a filename, aka Bug IDs CSCuv08491, CSCuv08443, CSCuv08480, CSCuv08448, CSCuu99291, CSCuv08434, and CSCuv08436. | |||||
| CVE-2016-1454 | 1 Cisco | 54 5548p, 5548up, 5596t and 51 more | 2025-04-12 | 7.1 HIGH | 6.5 MEDIUM |
| Cisco NX-OS 4.0 through 7.3 and 11.0 through 11.2 on 1000v, 2000, 3000, 3500, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device reload) by leveraging a peer relationship to send a crafted BGP UPDATE message, aka Bug IDs CSCuq77105 and CSCux11417. | |||||
| CVE-2015-0658 | 1 Cisco | 35 Nexus 3016, Nexus 3048, Nexus 3064 and 32 more | 2025-04-12 | 7.9 HIGH | N/A |
| The DHCP implementation in the PowerOn Auto Provisioning (POAP) feature in Cisco NX-OS does not properly restrict the initialization process, which allows remote attackers to execute arbitrary commands as root by sending crafted response packets on the local network, aka Bug ID CSCur14589. | |||||
| CVE-2015-0775 | 1 Cisco | 28 Mds 9000 Nx-os, Nexus 1000v, Nexus 3016 and 25 more | 2025-04-12 | 5.0 MEDIUM | N/A |
| The banner (aka MOTD) implementation in Cisco NX-OS 4.1(2)E1(1f) on Nexus 4000 devices, 5.2(1)SV3(2.1) on Nexus 1000V devices, 6.0(2)N2(2) on Nexus 5000 devices, 6.2(11) on MDS 9000 devices, 6.2(12) on Nexus 7000 devices, 7.0(3) on Nexus 9000 devices, and 7.2(0)ZN(99.67) on Nexus 3000 devices allows remote attackers to cause a denial of service (login process reset) via an unspecified terminal-session request during TELNET session setup, aka Bug IDs CSCuo10554, CSCuu75466, CSCuu75471, CSCuu75484, CSCuu75498, CSCuu77170, and CSCuu77182. | |||||
| CVE-2015-4296 | 1 Cisco | 11 Nexus 3016, Nexus 3048, Nexus 3064 and 8 more | 2025-04-12 | 5.0 MEDIUM | N/A |
| Nexus Data Broker (NDB) on Cisco Nexus 3000 devices with software 6.0(2)A6(1) allows remote attackers to cause a denial of service (Java process restart) via crafted connections to the Java application, aka Bug ID CSCut87006. | |||||
| CVE-2015-0721 | 1 Cisco | 56 Nexus 1000v For Microsoft Hyper-v, Nexus 1000v For Vmware Vsphere, Nexus 3016 and 53 more | 2025-04-12 | 9.0 HIGH | 8.0 HIGH |
| Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492. | |||||
| CVE-2024-20399 | 1 Cisco | 201 Mds 9000, Mds 9100, Mds 9132t and 198 more | 2025-01-27 | N/A | 6.0 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated user in possession of Administrator credentials to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific configuration CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected configuration CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of root. Note: To successfully exploit this vulnerability on a Cisco NX-OS device, an attacker must have Administrator credentials. The following Cisco devices already allow administrative users to access the underlying operating system through the bash-shell feature, so, for these devices, this vulnerability does not grant any additional privileges: Nexus 3000 Series Switches Nexus 7000 Series Switches that are running Cisco NX-OS Software releases 8.1(1) and later Nexus 9000 Series Switches in standalone NX-OS mode | |||||
| CVE-2023-20169 | 1 Cisco | 35 Nexus 3048, Nexus 31108pc-v, Nexus 31108tc-v and 32 more | 2024-11-21 | N/A | 7.4 HIGH |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) protocol of Cisco NX-OS Software for the Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, adjacent attacker to cause the IS-IS process to unexpectedly restart, which could cause an affected device to reload. This vulnerability is due to insufficient input validation when parsing an ingress IS-IS packet. An attacker could exploit this vulnerability by sending a crafted IS-IS packet to an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the unexpected restart of the IS-IS process, which could cause the affected device to reload. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2 adjacent to the affected device. | |||||
| CVE-2023-20168 | 1 Cisco | 84 Mds 9000, Mds 9100, Mds 9132t and 81 more | 2024-11-21 | N/A | 7.1 HIGH |
| A vulnerability in TACACS+ and RADIUS remote authentication for Cisco NX-OS Software could allow an unauthenticated, local attacker to cause an affected device to unexpectedly reload. This vulnerability is due to incorrect input validation when processing an authentication attempt if the directed request option is enabled for TACACS+ or RADIUS. An attacker could exploit this vulnerability by entering a crafted string at the login prompt of an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2023-20115 | 1 Cisco | 82 Nexus 3048, Nexus 31108pc-v, Nexus 31108tc-v and 79 more | 2024-11-21 | N/A | 5.4 MEDIUM |
| A vulnerability in the SFTP server implementation for Cisco Nexus 3000 Series Switches and 9000 Series Switches in standalone NX-OS mode could allow an authenticated, remote attacker to download or overwrite files from the underlying operating system of an affected device. This vulnerability is due to a logic error when verifying the user role when an SFTP connection is opened to an affected device. An attacker could exploit this vulnerability by connecting and authenticating via SFTP as a valid, non-administrator user. A successful exploit could allow the attacker to read or overwrite files from the underlying operating system with the privileges of the authenticated user. There are workarounds that address this vulnerability. | |||||
| CVE-2023-20050 | 1 Cisco | 111 Mds 9000, Mds 9100, Mds 9132t and 108 more | 2024-11-21 | N/A | 4.4 MEDIUM |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments that are passed to specific CLI commands. An attacker could exploit this vulnerability by including crafted input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user. | |||||
| CVE-2022-20824 | 1 Cisco | 288 Mds 9506, Mds 9506 Firmware, Mds 9513 and 285 more | 2024-11-21 | N/A | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation of specific values that are within a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, which would cause the affected device to reload, resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2022-20823 | 1 Cisco | 294 Nexus 3016, Nexus 3016 Firmware, Nexus 3016q and 291 more | 2024-11-21 | N/A | 8.6 HIGH |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. | |||||
| CVE-2022-20650 | 1 Cisco | 66 N9k-c9316d-gx, N9k-c9332d-gx2b, N9k-c9348d-gx2a and 63 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation of user supplied data that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP POST request to the NX-API of an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system. Note: The NX-API feature is disabled by default. | |||||
| CVE-2022-20625 | 1 Cisco | 110 Firepower 4110, Firepower 4112, Firepower 4115 and 107 more | 2024-11-21 | 6.1 MEDIUM | 4.3 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart. | |||||