Total
18775 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43480 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition The acp3x_5682_init() function did not check the return value of clk_get(), which could lead to dereferencing error pointers in rt5682_clk_enable(). Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding proper IS_ERR() checks for both clock acquisitions. | |||||
| CVE-2026-43481 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net-shapers: don't free reply skb after genlmsg_reply() genlmsg_reply() hands the reply skb to netlink, and netlink_unicast() consumes it on all return paths, whether the skb is queued successfully or freed on an error path. net_shaper_nl_get_doit() and net_shaper_nl_cap_get_doit() currently jump to free_msg after genlmsg_reply() fails and call nlmsg_free(msg), which can hit the same skb twice. Return the genlmsg_reply() error directly and keep free_msg only for pre-reply failures. | |||||
| CVE-2026-43482 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Disable preemption between scx_claim_exit() and kicking helper work scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from triggering further error handling. After claiming exit, the caller must kick the helper kthread work which initiates bypass mode and teardown. If the calling task gets preempted between claiming exit and kicking the helper work, and the BPF scheduler fails to schedule it back (since error handling is now disabled), the helper work is never queued, bypass mode never activates, tasks stop being dispatched, and the system wedges. Disable preemption across scx_claim_exit() and the subsequent work kicking in all callers - scx_disable() and scx_vexit(). Add lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the requirement. | |||||
| CVE-2026-43483 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated Explicitly set/clear CR8 write interception when AVIC is (de)activated to fix a bug where KVM leaves the interception enabled after AVIC is activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8 will remain intercepted in perpetuity. On its own, the dangling CR8 intercept is "just" a performance issue, but combined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging intercept is fatal to Windows guests as the TPR seen by hardware gets wildly out of sync with reality. Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this is firmly an SVM implementation flaw/detail. WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should never enter the guest with AVIC enabled and CR8 writes intercepted. [Squash fix to avic_deactivate_vmcb. - Paolo] | |||||
| CVE-2026-43484 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flags out of the bitfield word to avoid unrelated RMW side effects in asynchronous contexts. The host->claimed bit shared a word with retune flags. Writes to claimed in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite other bits when concurrent updates happen in other contexts, triggering spurious WARN_ON(!host->claimed). Convert claimed, can_retune, retune_now and retune_paused to bool to remove shared-word coupling. | |||||
| CVE-2026-43485 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless. | |||||
| CVE-2026-43486 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the same bits consumed by __ptep_set_access_flags()), using raw per-PTE values rather than the gathered ptep_get() view, before returning no-op. Keep using the raw target PTE for the write-bit unfold decision. Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT range may become the effective cached translation and software must maintain consistent attributes across the range. | |||||
| CVE-2026-43487 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Disable LPM on ST1000DM010-2EP102 According to a user report, the ST1000DM010-2EP102 has problems with LPM, causing random system freezes. The drive belongs to the same BarraCuda family as the ST2000DM008-2FR102 which has the same issue. | |||||
| CVE-2026-43488 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC. | |||||
| CVE-2026-43489 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: luo_file: remember retrieve() status LUO keeps track of successful retrieve attempts on a LUO file. It does so to avoid multiple retrievals of the same file. Multiple retrievals cause problems because once the file is retrieved, the serialized data structures are likely freed and the file is likely in a very different state from what the code expects. The retrieve boolean in struct luo_file keeps track of this, and is passed to the finish callback so it knows what work was already done and what it has left to do. All this works well when retrieve succeeds. When it fails, luo_retrieve_file() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. This results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace, but nothing prevents it from trying this again. The retry is problematic for much of the same reasons listed above. The file is likely in a very different state than what the retrieve logic normally expects, and it might even have freed some serialization data structures. Attempting to access them or free them again is going to break things. For example, if memfd managed to restore 8 of its 10 folios, but fails on the 9th, a subsequent retrieve attempt will try to call kho_restore_folio() on the first folio again, and that will fail with a warning since it is an invalid operation. Apart from the retry, finish() also breaks. Since on failure the retrieved bool in luo_file is never touched, the finish() call on session close will tell the file handler that retrieve was never attempted, and it will try to access or free the data structures that might not exist, much in the same way as the retry attempt. There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. Also pass this status code to finish() so it can make the right decision on the work it needs to do. This is done by changing the bool to an integer. A value of 0 means retrieve was never attempted, a positive value means it succeeded, and a negative value means it failed and the error code is the value. | |||||
| CVE-2026-43490 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate inherited ACE SID length smb_inherit_dacl() walks the parent directory DACL loaded from the security descriptor xattr. It verifies that each ACE contains the fixed SID header before using it, but does not verify that the variable-length SID described by sid.num_subauth is fully contained in the ACE. A malformed inheritable ACE can advertise more subauthorities than are present in the ACE. compare_sids() may then read past the ACE. smb_set_ace() also clamps the copied destination SID, but used the unchecked source SID count to compute the inherited ACE size. That could advance the temporary inherited ACE buffer pointer and nt_size accounting past the allocated buffer. Fix this by validating the parent ACE SID count and SID length before using the SID during inheritance. Compute the inherited ACE size from the copied SID so the size matches the bounded destination SID. Reject the inherited DACL if size accumulation would overflow smb_acl.size or the security descriptor allocation size. | |||||
| CVE-2026-43491 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Limit the maximum server registration per node Current code does no bound checking on the number of servers added per node. A malicious client can flood NEW_SERVER messages and exhaust memory. Fix this issue by limiting the maximum number of server registrations to 256 per node. If the NEW_SERVER message is received for an old port, then don't restrict it as it will get replaced. While at it, also rate limit the error messages in the failure path of qrtr_ns_worker(). Note that the limit of 256 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased. | |||||
| CVE-2026-45837 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in arena_vm_close on fork arena_vm_open() only bumps vml->mmap_count but never registers the child VMA in arena->vma_list. The vml->vma always points at the parent VMA, so after parent munmap the pointer dangles. If the child then calls bpf_arena_free_pages(), zap_pages() reads the stale vml->vma triggering use-after-free. Fix this by preventing the arena VMA from being inherited across fork with VM_DONTCOPY, and preventing VMA splits via the may_split callback. Also reject mremap with a .mremap callback returning -EINVAL. A same-size mremap(MREMAP_FIXED) on the full arena VMA reaches copy_vma() through the following path: check_prep_vma() - returns 0 early: new_len == old_len skips VM_DONTEXPAND check prep_move_vma() - vm_start == old_addr and vm_end == old_addr + old_len so may_split is never called move_vma() copy_vma_and_data() copy_vma() vm_area_dup() - copies vm_private_data (vml pointer) vm_ops->open() - bumps vml->mmap_count vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA The refcount ensures the rollback's arena_vm_close does not free the vml shared with the original VMA. | |||||
| CVE-2026-45838 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix end-of-list detection in cgroup_storage_get_next_key() list_next_entry() never returns NULL -- when the current element is the last entry it wraps to the list head via container_of(). The subsequent NULL check is therefore dead code and get_next_key() never returns -ENOENT for the last element, instead reading storage->key from a bogus pointer that aliases internal map fields and copying the result to userspace. Replace it with list_entry_is_head() so the function correctly returns -ENOENT when there are no more entries. | |||||
| CVE-2026-45839 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N) false for any positive N. When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff, producing an out-of-bounds read far past the members array. A crafted BPF program with a negative CO-RE accessor on any struct that exists in vmlinux BTF (e.g. task_struct) crashes the kernel deterministically during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y (default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: <TASK> bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) </TASK> CO-RE accessor indices are inherently non-negative (struct member index, array element index, or enumerator index), so reject them immediately after parsing. | |||||
| CVE-2026-45840 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: cap upcall PID array size and pre-size vport replies The vport netlink reply helpers allocate a fixed-size skb with nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID array via ovs_vport_get_upcall_portids(). Since ovs_vport_set_upcall_portids() accepts any non-zero multiple of sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID array large enough to overflow the reply buffer, causing nla_put() to fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with unprivileged user namespaces enabled (e.g., Ubuntu default), this is reachable via unshare -Urn since OVS vport mutation operations use GENL_UNS_ADMIN_PERM. kernel BUG at net/openvswitch/datapath.c:2414! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1 RIP: 0010:ovs_vport_cmd_set+0x34c/0x400 Call Trace: <TASK> genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116) genl_rcv_msg (net/netlink/genetlink.c:1194) netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Kernel panic - not syncing: Fatal exception Reject attempts to set more PIDs than nr_cpu_ids in ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply size in ovs_vport_cmd_msg_size() based on that bound, similar to the existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already used by the per-CPU dispatch configuration on the datapath side (ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the two sides stay consistent. | |||||
| CVE-2026-45841 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO nf_osf_match_one() computes ctx->window % f->wss.val in the OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a subsequent matching TCP SYN divides by zero and panics the kernel. Reject the bogus fingerprint in nfnl_osf_add_callback() above the per-option for-loop. f->wss is per-fingerprint, not per-option, so the check must run regardless of f->opt_num (including 0). Also reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that as "should not happen". Crash: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98) Call Trace: <IRQ> nf_osf_match (net/netfilter/nfnetlink_osf.c:220) xt_osf_match_packet (net/netfilter/xt_osf.c:32) ipt_do_table (net/ipv4/netfilter/ip_tables.c:348) nf_hook_slow (net/netfilter/core.c:622) ip_local_deliver (net/ipv4/ip_input.c:265) ip_rcv (include/linux/skbuff.h:1162) __netif_receive_skb_one_core (net/core/dev.c:6181) process_backlog (net/core/dev.c:6642) __napi_poll (net/core/dev.c:7710) net_rx_action (net/core/dev.c:7945) handle_softirqs (kernel/softirq.c:622) | |||||
| CVE-2026-45842 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: slip: reject VJ receive packets on instances with no rstate array slhc_init() accepts rslots == 0 as a valid configuration, with the documented meaning of 'no receive compression'. In that case the allocation loop in slhc_init() is skipped, so comp->rstate stays NULL and comp->rslot_limit stays 0 (from the kzalloc of struct slcompress). The receive helpers do not defend against that configuration. slhc_uncompress() dereferences comp->rstate[x] when the VJ header carries an explicit connection ID, and slhc_remember() later assigns cs = &comp->rstate[...] after only comparing the packet's slot number to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the range check, and the code dereferences a NULL rstate. The configuration is reachable in-tree through PPP. PPPIOCSMAXCID stores its argument in a signed int, and (val >> 16) uses arithmetic shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1 is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because /dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path is reachable from an unprivileged user namespace. Once the malformed VJ state is installed, any inbound VJ-compressed or VJ-uncompressed frame that selects slot 0 crashes the kernel in softirq context: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519) Call Trace: <TASK> ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466) ppp_input (drivers/net/ppp/ppp_generic.c:2359) ppp_async_process (drivers/net/ppp/ppp_async.c:492) tasklet_action_common (kernel/softirq.c:926) handle_softirqs (kernel/softirq.c:623) run_ksoftirqd (kernel/softirq.c:1055) smpboot_thread_fn (kernel/smpboot.c:160) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) </TASK> Reject the receive side on such instances instead of touching rstate. slhc_uncompress() falls through to its existing 'bad' label, which bumps sls_i_error and enters the toss state. slhc_remember() mirrors that with an explicit sls_i_error increment followed by slhc_toss(); the sls_i_runt counter is not used here because a missing rstate is an internal configuration state, not a runt packet. The transmit path is unaffected: the only in-tree caller that picks rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and slip.c always calls slhc_init(16, 16), so comp->tstate remains valid and slhc_compress() continues to work. | |||||
| CVE-2026-45843 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packets. Make decode() and pull16() take the packet end pointer and return -1 when exhausted. Add a bounds check before the TCP-checksum read. The existing == -1 tests now do what they were always meant to. | |||||
| CVE-2026-45844 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: arp_tables: fix IEEE1394 ARP payload parsing Weiming Shi says: "arp_packet_match() unconditionally parses the ARP payload assuming two hardware addresses are present (source and target). However, IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address field, and arp_hdr_len() already accounts for this by returning a shorter length for ARPHRD_IEEE1394 devices. As a result, on IEEE1394 interfaces arp_packet_match() advances past a nonexistent target hardware address and reads the wrong bytes for both the target device address comparison and the target IP address. This causes arptables rules to match against garbage data, leading to incorrect filtering decisions: packets that should be accepted may be dropped and vice versa. The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already handles this correctly by skipping the target hardware address for ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()." Mangle the original patch to always return 0 (no match) in case user matches on the target hardware address which is never present in IEEE1394. Note that this returns 0 (no match) for either normal and inverse match because matching in the target hardware address in ARPHRD_IEEE1394 has never been supported by arptables. This is intentional, matching on the target hardware address should never evaluate true for ARPHRD_IEEE1394. Moreover, adjust arpt_mangle to drop the packet too as AI suggests: In arpt_mangle, the logic assumes a standard ARP layout. Because IEEE1394 (FireWire) omits the target hardware address, the linear pointer arithmetic miscalculates the offset for the target IP address. This causes mangling operations to write to the wrong location, leading to packet corruption. To ensure safety, this patch drops packets (NF_DROP) when mangling is requested for these fields on IEEE1394 devices, as the current implementation cannot correctly map the FireWire ARP payload. This omits both mangling target hardware and IP address. Even if IP address mangling should be possible in IEEE1394, this would require to adjust arpt_mangle offset calculation, which has never been supported. Based on patch from Weiming Shi <bestswngs@gmail.com>. | |||||