Filtered by vendor Netgear
Subscribe
Total
1335 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-28339 | 1 Netgear | 6 Cbk40, Cbk40 Firmware, Cbk43 and 3 more | 2026-06-17 | N/A | 5.4 MEDIUM |
| An information leak in the debuginfo.htm component of Netgear CBR40 2.5.0.28, Netgear CBK40 2.5.0.28, and Netgear CBK43 2.5.0.28 allows attackers to obtain sensitive information without any authentication required. | |||||
| CVE-2024-1431 | 1 Netgear | 2 R7000, R7000 Firmware | 2026-06-17 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-1430 | 1 Netgear | 2 R7000, R7000 Firmware | 2026-06-17 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-12988 | 1 Netgear | 4 R6900p, R6900p Firmware, R7000p and 1 more | 2026-06-17 | 7.5 HIGH | 7.3 HIGH |
| A vulnerability has been found in Netgear R6900P and R7000P 1.3.3.154 and classified as critical. Affected by this vulnerability is the function sub_16C4C of the component HTTP Header Handler. The manipulation of the argument Host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2024-12847 | 1 Netgear | 2 Dgn1000, Dgn1000 Firmware | 2026-06-17 | N/A | 9.8 CRITICAL |
| NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC. | |||||
| CVE-2023-51635 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR RAX30 fing_dil Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within fing_dil service. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19843. | |||||
| CVE-2023-51634 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2026-06-17 | N/A | 7.5 HIGH |
| NETGEAR RAX30 Improper Certificate Validation Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to compromise the integrity of downloaded information on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the downloading of files via HTTPS. The issue results from the lack of proper validation of the certificate presented by the server. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-19589. | |||||
| CVE-2023-50677 | 1 Netgear | 2 Dgnd4000, Dgnd4000 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| An issue in NETGEAR-DGND4000 v.1.1.00.15_1.00.15 allows a remote attacker to escalate privileges via the next_file parameter to the /setup.cgi component. | |||||
| CVE-2023-50231 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 9.6 CRITICAL |
| NETGEAR ProSAFE Network Management System saveNodeLabel Cross-Site Scripting Privilege Escalation Vulnerability. This vulnerability allows remote attackers to escalate privileges on affected installations of NETGEAR ProSAFE Network Management System. Minimal user interaction is required to exploit this vulnerability. The specific flaw exists within the saveNodeLabel method. The issue results from the lack of proper validation of user-supplied data, which can lead to the injection of an arbitrary script. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the user. Was ZDI-CAN-21838. | |||||
| CVE-2023-50089 | 1 Netgear | 2 Wnr2000, Wnr2000 Firmware | 2026-06-17 | N/A | 9.8 CRITICAL |
| A Command Injection vulnerability exists in NETGEAR WNR2000v4 version 1.0.0.70. When using HTTP for SOAP authentication, command execution occurs during the process after successful authentication. | |||||
| CVE-2023-49694 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 7.8 HIGH |
| A low-privileged OS user with access to a Windows host where NETGEAR ProSAFE Network Management System is installed can create arbitrary JSP files in a Tomcat web application directory. The user can then execute the JSP files under the security context of SYSTEM. | |||||
| CVE-2023-49693 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 9.8 CRITICAL |
| NETGEAR ProSAFE Network Management System has Java Debug Wire Protocol (JDWP) listening on port 11611 and it is remotely accessible by unauthenticated users, allowing attackers to execute arbitrary code. | |||||
| CVE-2023-49007 | 1 Netgear | 2 Rbr750, Rbr750 Firmware | 2026-06-17 | N/A | 9.8 CRITICAL |
| In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd. | |||||
| CVE-2023-48725 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2026-06-17 | N/A | 7.2 HIGH |
| A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | |||||
| CVE-2023-44450 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR ProSAFE Network Management System getNodesByTopologyMapSearch SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the getNodesByTopologyMapSearch function. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-21858. | |||||
| CVE-2023-44449 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR ProSAFE Network Management System clearAlertByIds SQL Injection Privilege Escalation Vulnerability. This vulnerability allows remote attackers to escalate privileges on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the clearAlertByIds function. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the user. Was ZDI-CAN-21875. | |||||
| CVE-2023-44445 | 1 Netgear | 2 Cax30, Cax30 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR CAX30 SSO Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR CAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the sso binary. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19058. | |||||
| CVE-2023-41183 | 1 Netgear | 2 Rbr760, Rbr760 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR Orbi 760 SOAP API Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of NETGEAR Orbi 760 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the SOAP API. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-20524. | |||||
| CVE-2023-41182 | 1 Netgear | 1 Prosafe Network Management System | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR ProSAFE Network Management System ZipUtils Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the ZipUtils class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-19716. | |||||
| CVE-2023-40480 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| NETGEAR RAX30 DHCP Server Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DHCP server. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19705. | |||||