Total
12774 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-46683 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: prevent UAF around preempt fence The fence lock is part of the queue, therefore in the current design anything locking the fence should then also hold a ref to the queue to prevent the queue from being freed. However, currently it looks like we signal the fence and then drop the queue ref, but if something is waiting on the fence, the waiter is kicked to wake up at some later point, where upon waking up it first grabs the lock before checking the fence state. But if we have already dropped the queue ref, then the lock might already be freed as part of the queue, leading to uaf. To prevent this, move the fence lock into the fence itself so we don't run into lifetime issues. Alternative might be to have device level lock, or only release the queue in the fence release callback, however that might require pushing to another worker to avoid locking issues. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2454 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2342 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2020 (cherry picked from commit 7116c35aacedc38be6d15bd21b2fc936eed0008b) | |||||
| CVE-2024-46682 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178 | |||||
| CVE-2024-45020 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a kernel verifier crash in stacksafe() Daniel Hodges reported a kernel verifier crash when playing with sched-ext. Further investigation shows that the crash is due to invalid memory access in stacksafe(). More specifically, it is the following code: if (exact != NOT_EXACT && old->stack[spi].slot_type[i % BPF_REG_SIZE] != cur->stack[spi].slot_type[i % BPF_REG_SIZE]) return false; The 'i' iterates old->allocated_stack. If cur->allocated_stack < old->allocated_stack the out-of-bound access will happen. To fix the issue add 'i >= cur->allocated_stack' check such that if the condition is true, stacksafe() should fail. Otherwise, cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal. | |||||
| CVE-2024-45017 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec RoCE MPV trace call Prevent the call trace below from happening, by not allowing IPsec creation over a slave, if master device doesn't support IPsec. WARNING: CPU: 44 PID: 16136 at kernel/locking/rwsem.c:240 down_read+0x75/0x94 Modules linked in: esp4_offload esp4 act_mirred act_vlan cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa mst_pciconf(OE) nfsv3 nfs_acl nfs lockd grace fscache netfs xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill cuse fuse rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm ipmi_ssif intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel sha1_ssse3 dell_smbios ib_uverbs aesni_intel crypto_simd dcdbas wmi_bmof dell_wmi_descriptor cryptd pcspkr ib_core acpi_ipmi sp5100_tco ccp i2c_piix4 ipmi_si ptdma k10temp ipmi_devintf ipmi_msghandler acpi_power_meter acpi_cpufreq ext4 mbcache jbd2 sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect mlx5_core sysimgblt fb_sys_fops cec ahci libahci mlxfw drm pci_hyperv_intf libata tg3 sha256_ssse3 tls megaraid_sas i2c_algo_bit psample wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mst_pci] CPU: 44 PID: 16136 Comm: kworker/44:3 Kdump: loaded Tainted: GOE 5.15.0-20240509.el8uek.uek7_u3_update_v6.6_ipsec_bf.x86_64 #2 Hardware name: Dell Inc. PowerEdge R7525/074H08, BIOS 2.0.3 01/15/2021 Workqueue: events xfrm_state_gc_task RIP: 0010:down_read+0x75/0x94 Code: 00 48 8b 45 08 65 48 8b 14 25 80 fc 01 00 83 e0 02 48 09 d0 48 83 c8 01 48 89 45 08 5d 31 c0 89 c2 89 c6 89 c7 e9 cb 88 3b 00 <0f> 0b 48 8b 45 08 a8 01 74 b2 a8 02 75 ae 48 89 c2 48 83 ca 02 f0 RSP: 0018:ffffb26387773da8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa08b658af900 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ff886bc5e1366f2f RDI: 0000000000000000 RBP: ffffa08b658af940 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0a9bfb31540 R13: ffffa0a9bfb37900 R14: 0000000000000000 R15: ffffa0a9bfb37905 FS: 0000000000000000(0000) GS:ffffa0a9bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a45ed814e8 CR3: 000000109038a000 CR4: 0000000000350ee0 Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] ? down_read+0x75/0x94 ? __warn+0x80/0x113 ? down_read+0x75/0x94 ? report_bug+0xa4/0x11d ? handle_bug+0x35/0x8b ? exc_invalid_op+0x14/0x75 ? asm_exc_invalid_op+0x16/0x1b ? down_read+0x75/0x94 ? down_read+0xe/0x94 mlx5_devcom_for_each_peer_begin+0x29/0x60 [mlx5_core] mlx5_ipsec_fs_roce_tx_destroy+0xb1/0x130 [mlx5_core] tx_destroy+0x1b/0xc0 [mlx5_core] tx_ft_put+0x53/0xc0 [mlx5_core] mlx5e_xfrm_free_state+0x45/0x90 [mlx5_core] ___xfrm_state_destroy+0x10f/0x1a2 xfrm_state_gc_task+0x81/0xa9 process_one_work+0x1f1/0x3c6 worker_thread+0x53/0x3e4 ? process_one_work.cold+0x46/0x3c kthread+0x127/0x144 ? set_kthread_struct+0x60/0x52 ret_from_fork+0x22/0x2d </TASK> ---[ end trace 5ef7896144d398e1 ]--- | |||||
| CVE-2024-45015 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/ | |||||
| CVE-2024-45014 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid possible physmem_info segment corruption When physical memory for the kernel image is allocated it does not consider extra memory required for offsetting the image start to match it with the lower 20 bits of KASLR virtual base address. That might lead to kernel access beyond its memory range. | |||||
| CVE-2024-45013 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvme: move stopping keep-alive into nvme_uninit_ctrl() Commit 4733b65d82bd ("nvme: start keep-alive after admin queue setup") moves starting keep-alive from nvme_start_ctrl() into nvme_init_ctrl_finish(), but don't move stopping keep-alive into nvme_uninit_ctrl(), so keep-alive work can be started and keep pending after failing to start controller, finally use-after-free is triggered if nvme host driver is unloaded. This patch fixes kernel panic when running nvme/004 in case that connection failure is triggered, by moving stopping keep-alive into nvme_uninit_ctrl(). This way is reasonable because keep-alive is now started in nvme_init_ctrl_finish(). | |||||
| CVE-2024-45012 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: use dma non-coherent allocator Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup, when the iommu is enabled: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 Fix this by using the non-coherent allocator instead, I think there might be a better answer to this, but it involve ripping up some of APIs using sg lists. | |||||
| CVE-2024-45023 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix data corruption for degraded array with slow disk read_balance() will avoid reading from slow disks as much as possible, however, if valid data only lands in slow disks, and a new normal disk is still in recovery, unrecovered data can be read: raid1_read_request read_balance raid1_should_read_first -> return false choose_best_rdev -> normal disk is not recovered, return -1 choose_bb_rdev -> missing the checking of recovery, return the normal disk -> read unrecovered data Root cause is that the checking of recovery is missing in choose_bb_rdev(). Hence add such checking to fix the problem. Also fix similar problem in choose_slow_rdev(). | |||||
| CVE-2024-45024 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb vs. core-mm PT locking We recently made GUP's common page table walking code to also walk hugetlb VMAs without most hugetlb special-casing, preparing for the future of having less hugetlb-specific page table walking code in the codebase. Turns out that we missed one page table locking detail: page table locking for hugetlb folios that are not mapped using a single PMD/PUD. Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the page tables, will perform a pte_offset_map_lock() to grab the PTE table lock. However, hugetlb that concurrently modifies these page tables would actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the locks would differ. Something similar can happen right now with hugetlb folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS. This issue can be reproduced [1], for example triggering: [ 3105.936100] ------------[ cut here ]------------ [ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188 [ 3105.944634] Modules linked in: [...] [ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1 [ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024 [ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3105.991108] pc : try_grab_folio+0x11c/0x188 [ 3105.994013] lr : follow_page_pte+0xd8/0x430 [ 3105.996986] sp : ffff80008eafb8f0 [ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43 [ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48 [ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978 [ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001 [ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000 [ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000 [ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0 [ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080 [ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000 [ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000 [ 3106.047957] Call trace: [ 3106.049522] try_grab_folio+0x11c/0x188 [ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0 [ 3106.055527] follow_page_mask+0x1a0/0x2b8 [ 3106.058118] __get_user_pages+0xf0/0x348 [ 3106.060647] faultin_page_range+0xb0/0x360 [ 3106.063651] do_madvise+0x340/0x598 Let's make huge_pte_lockptr() effectively use the same PT locks as any core-mm page table walker would. Add ptep_lockptr() to obtain the PTE page table lock using a pte pointer -- unfortunately we cannot convert pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables we can have with CONFIG_HIGHPTE. Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such that when e.g., CONFIG_PGTABLE_LEVELS==2 with PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document why that works. There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb folio being mapped using two PTE page tables. While hugetlb wants to take the PMD table lock, core-mm would grab the PTE table lock of one of both PTE page tables. In such corner cases, we have to make sure that both locks match, which is (fortunately!) currently guaranteed for 8xx as it does not support SMP and consequently doesn't use split PT locks. [1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/ | |||||
| CVE-2024-45030 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: igb: cope with large MAX_SKB_FRAGS Sabrina reports that the igb driver does not cope well with large MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload corruption on TX. An easy reproducer is to run ssh to connect to the machine. With MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has been reported originally in https://bugzilla.redhat.com/show_bug.cgi?id=2265320 The root cause of the issue is that the driver does not take into account properly the (possibly large) shared info size when selecting the ring layout, and will try to fit two packets inside the same 4K page even when the 1st fraglist will trump over the 2nd head. Address the issue by checking if 2K buffers are insufficient. | |||||
| CVE-2024-46672 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. | |||||
| CVE-2023-52897 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: do not warn on record without old_roots populated [BUG] There are some reports from the mailing list that since v6.1 kernel, the WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during rescan: WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7 RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] Call Trace: <TASK> btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? __rseq_handle_notify_resume+0xa9/0x4a0 ? mntput_no_expire+0x4a/0x240 ? __seccomp_filter+0x319/0x4d0 __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x5b/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd9b790d9bf </TASK> [CAUSE] Since commit e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if our qgroup is already in inconsistent state, we will no longer do the time-consuming backref walk. This can leave some qgroup records without a valid old_roots ulist. Normally this is fine, as btrfs_qgroup_account_extents() would also skip those records if we have NO_ACCOUNTING flag set. But there is a small window, if we have NO_ACCOUNTING flag set, and inserted some qgroup_record without a old_roots ulist, but then the user triggered a qgroup rescan. During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then commit current transaction. And since we have a qgroup_record with old_roots = NULL, we trigger the WARN_ON() during btrfs_qgroup_account_extents(). [FIX] Unfortunately due to the introduction of NO_ACCOUNTING flag, the assumption that every qgroup_record would have its old_roots populated is no longer correct. Fix the false alerts and drop the WARN_ON(). | |||||
| CVE-2023-52898 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix null pointer dereference when host dies Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device | |||||
| CVE-2023-52899 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Add exception protection processing for vd in axi_chan_handle_err function Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- | |||||
| CVE-2023-52900 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix general protection fault in nilfs_btree_insert() If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be. | |||||
| CVE-2023-52901 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 | |||||
| CVE-2023-52903 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: lock overflowing for IOPOLL syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace: io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773 io_fill_cqe_req io_uring/io_uring.h:168 [inline] io_do_iopoll+0x474/0x62c io_uring/rw.c:1065 io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513 io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056 io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path. | |||||
| CVE-2023-52902 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nommu: fix memory leak in do_mmap() error path The preallocation of the maple tree nodes may leak if the error path to "error_just_free" is taken. Fix this by moving the freeing of the maple tree nodes to a shared location for all error paths. | |||||
| CVE-2023-52905 | 1 Linux | 1 Linux Kernel | 2024-09-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix resource leakage in VF driver unbind resources allocated like mcam entries to support the Ntuple feature and hash tables for the tc feature are not getting freed in driver unbind. This patch fixes the issue. | |||||