Filtered by vendor Tp-link
Subscribe
Total
519 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-46313 | 1 Tp-link | 2 Wr941nd, Wr941nd Firmware | 2026-06-17 | N/A | 8.0 HIGH |
| TP-Link WR941ND V6 has a stack overflow vulnerability in the ssid parameter in /userRpm/popupSiteSurveyRpm.htm. | |||||
| CVE-2024-42815 | 1 Tp-link | 2 Re365, Re365 Firmware | 2026-06-17 | N/A | 9.8 CRITICAL |
| In the TP-Link RE365 V1_180213, there is a buffer overflow vulnerability due to the lack of length verification for the USER_AGENT field in /usr/bin/httpd. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands. | |||||
| CVE-2024-37662 | 1 Tp-link | 2 Tl-7dr5130, Tl-7dr5130 Firmware | 2026-06-17 | N/A | 6.3 MEDIUM |
| TP-LINK TL-7DR5130 v1.0.23 is vulnerable to TCP DoS or hijacking attacks. An attacker in the same WLAN as the victim can disconnect or hijack the traffic between the victim and any remote server by sending out forged TCP RST messages to evict NAT mappings in the router. | |||||
| CVE-2024-37661 | 1 Tp-link | 2 Tl-7dr5130, Tl-7dr5130 Firmware | 2026-06-17 | N/A | 6.3 MEDIUM |
| TP-LINK TL-7DR5130 v1.0.23 is vulnerable to forged ICMP redirect message attacks. An attacker in the same WLAN as the victim can hijack the traffic between the victim and any remote server by sending out forged ICMP redirect messages. | |||||
| CVE-2024-2188 | 1 Tp-link | 2 Archer Ax50, Archer Ax50 Firmware | 2026-06-17 | N/A | 6.1 MEDIUM |
| Cross-Site Scripting (XSS) vulnerability stored in TP-Link Archer AX50 affecting firmware version 1.0.11 build 2022052. This vulnerability could allow an unauthenticated attacker to create a port mapping rule via a SOAP request and store a malicious JavaScript payload within that rule, which could result in an execution of the JavaScript payload when the rule is loaded. | |||||
| CVE-2024-25139 | 1 Tp-link | 2 Omada Er605, Omada Er605 Firmware | 2026-06-17 | N/A | 10.0 CRITICAL |
| In TP-Link Omada er605 1.0.1 through (v2.6) 2.2.3, a cloud-brd binary is susceptible to an integer overflow that leads to a heap-based buffer overflow. After heap shaping, an attacker can achieve code execution in the context of the cloud-brd binary that runs at the root level. This is fixed in ER605(UN)_v2_2.2.4 Build 020240119. | |||||
| CVE-2024-22733 | 1 Tp-link | 2 Mr200, Mr200 Firmware | 2026-06-17 | N/A | 7.5 HIGH |
| TP Link MR200 V4 Firmware version 210201 was discovered to contain a null-pointer-dereference in the web administration panel on /cgi/login via the sign, Action or LoginStatus query parameters which could lead to a denial of service by a local or remote unauthenticated attacker. | |||||
| CVE-2024-21833 | 1 Tp-link | 10 Archer Ax3000, Archer Ax3000 Firmware, Archer Ax5400 and 7 more | 2026-06-17 | N/A | 8.8 HIGH |
| Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product to execute arbitrary OS commands. The affected device, with the initial configuration, allows login only from the LAN port or Wi-Fi. | |||||
| CVE-2024-21827 | 1 Tp-link | 2 Er7206, Er7206 Firmware | 2026-06-17 | N/A | 7.2 HIGH |
| A leftover debug code vulnerability exists in the cli_server debug functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.4.1 Build 20240117 Rel.57421. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability. | |||||
| CVE-2024-21821 | 1 Tp-link | 6 Archer Ax3000, Archer Ax3000 Firmware, Archer Ax5400 and 3 more | 2026-06-17 | N/A | 8.0 HIGH |
| Multiple TP-LINK products allow a network-adjacent authenticated attacker with access to the product from the LAN port or Wi-Fi to execute arbitrary OS commands. | |||||
| CVE-2024-21773 | 1 Tp-link | 8 Archer Ax3000, Archer Ax3000 Firmware, Archer Ax5400 and 5 more | 2026-06-17 | N/A | 8.8 HIGH |
| Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product from the LAN port or Wi-Fi to execute arbitrary OS commands on the product that has pre-specified target devices and blocked URLs in parental control settings. | |||||
| CVE-2024-1180 | 1 Tp-link | 2 Omada Er605, Omada Er605 Firmware | 2026-06-17 | N/A | 8.0 HIGH |
| TP-Link Omada ER605 Access Control Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605. Authentication is required to exploit this vulnerability. The specific issue exists within the handling of the name field in the access control user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22227. | |||||
| CVE-2024-1179 | 1 Tp-link | 2 Omada Er605, Omada Er605 Firmware | 2026-06-17 | N/A | 8.8 HIGH |
| TP-Link Omada ER605 DHCPv6 Client Options Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of DHCP options. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22420. | |||||
| CVE-2024-12344 | 1 Tp-link | 2 Vn020 F3v, Vn020 F3v Firmware | 2026-06-17 | 6.5 MEDIUM | 6.3 MEDIUM |
| A vulnerability, which was classified as critical, was found in TP-Link VN020 F3v(T) TT_V6.2.1021. This affects an unknown part of the component FTP USER Command Handler. The manipulation leads to memory corruption. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2024-12343 | 1 Tp-link | 2 Vn020 F3v, Vn020 F3v Firmware | 2026-06-17 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability classified as critical has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected is an unknown function of the file /control/WANIPConnection of the component SOAP Request Handler. The manipulation of the argument NewConnectionType leads to buffer overflow. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2024-11237 | 1 Tp-link | 2 Vn020-f3v\(t\), Vn020-f3v\(t\) Firmware | 2026-06-17 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability, which was classified as critical, has been found in TP-Link VN020 F3v(T) TT_V6.2.1021. Affected by this issue is some unknown functionality of the component DHCP DISCOVER Packet Parser. The manipulation of the argument hostname leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2024-10523 | 1 Tp-link | 2 Tapo H100, Tapo H100 Firmware | 2026-06-17 | N/A | 4.6 MEDIUM |
| This vulnerability exists in TP-Link IoT Smart Hub due to storage of Wi-Fi credentials in plain text within the device firmware. An attacker with physical access could exploit this by extracting the firmware and analyzing the binary data to obtain the Wi-Fi credentials stored on the vulnerable device. | |||||
| CVE-2023-50225 | 1 Tp-link | 2 Tl-wr902ac, Tl-wr902ac Firmware | 2026-06-17 | N/A | 6.8 MEDIUM |
| TP-Link TL-WR902AC dm_fillObjByStr Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR902AC routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the libcmm.so module. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-21819. | |||||
| CVE-2023-50224 | 1 Tp-link | 2 Tl-wr841n, Tl-wr841n Firmware | 2026-06-17 | N/A | 6.5 MEDIUM |
| TP-Link TL-WR841N dropbearpwd Improper Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from improper authentication. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. . Was ZDI-CAN-19899. | |||||
| CVE-2023-49913 | 1 Tp-link | 4 Eap115, Eap115 Firmware, Eap225 and 1 more | 2026-06-17 | N/A | 7.2 HIGH |
| A stack-based buffer overflow vulnerability exists in the web interface Radio Scheduling functionality of Tp-Link AC1350 Wireless MU-MIMO Gigabit Access Point (EAP225 V3) v5.1.0 Build 20220926. A specially crafted series of HTTP requests can lead to remote code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability refers specifically to the overflow that occurs via the `action` parameter at offset `0x422448` of the `httpd` binary shipped with v5.0.4 Build 20220216 of the EAP115. | |||||