Total
18730 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53030 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers() The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup attribute to automatically free the memory when the variable goes out of scope. | |||||
| CVE-2026-53032 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL deref in map_kptr_match_type for scalar regs Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr") refactored map_kptr_match_type() to branch on btf_is_kernel() before checking base_type(). A scalar register stored into a kptr slot has no btf, so the btf_is_kernel(reg->btf) call dereferences NULL. Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf access. | |||||
| CVE-2026-53037 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them. | |||||
| CVE-2026-53038 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ima_fs: Correctly create securityfs files for unsupported hash algos ima_tpm_chip->allocated_banks[i].crypto_id is initialized to HASH_ALGO__LAST if the TPM algorithm is not supported. However there are places relying on the algorithm to be valid because it is accessed by hash_algo_name[]. On 6.12.40 I observe the following read out-of-bounds in hash_algo_name: ================================================================== BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440 Read of size 8 at addr ffffffff83e18138 by task swapper/0/1 CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3 Call Trace: <TASK> dump_stack_lvl+0x61/0x90 print_report+0xc4/0x580 ? kasan_addr_to_slab+0x26/0x80 ? create_securityfs_measurement_lists+0x396/0x440 kasan_report+0xc2/0x100 ? create_securityfs_measurement_lists+0x396/0x440 create_securityfs_measurement_lists+0x396/0x440 ima_fs_init+0xa3/0x300 ima_init+0x7d/0xd0 init_ima+0x28/0x100 do_one_initcall+0xa6/0x3e0 kernel_init_freeable+0x455/0x740 kernel_init+0x24/0x1d0 ret_from_fork+0x38/0x80 ret_from_fork_asm+0x11/0x20 </TASK> The buggy address belongs to the variable: hash_algo_name+0xb8/0x420 Memory state around the buggy address: ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9 ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9 ^ ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9 ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9 ================================================================== Seems like the TPM chip supports sha3_256, which isn't yet in tpm_algorithms: tpm tpm0: TPM with unsupported bank algorithm 0x0027 That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0 Library Part 2: Structures", page 51 [1]. See also the related U-Boot algorithms update [2]. Thus solve the problem by creating a file name with "_tpm_alg_<ID>" postfix if the crypto algorithm isn't initialized. This is how it looks on the test machine (patch ported to v6.12 release): # ls -1 /sys/kernel/security/ima/ ascii_runtime_measurements ascii_runtime_measurements_tpm_alg_27 ascii_runtime_measurements_sha1 ascii_runtime_measurements_sha256 binary_runtime_measurements binary_runtime_measurements_tpm_alg_27 binary_runtime_measurements_sha1 binary_runtime_measurements_sha256 policy runtime_measurements_count violations [1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf [2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html | |||||
| CVE-2026-53039 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup. | |||||
| CVE-2026-53040 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xd1/0x650 mm/kasan/report.c:482 kasan_report+0xfb/0x140 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 [inline] kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200 __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] test_bit_le include/asm-generic/bitops/le.h:21 [inline] ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828 ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 ... [CAUSE] ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the bitmap scan limit. The coherent path reads group descriptors through ocfs2_read_group_descriptor(), which validates the descriptor before use. The non-coherent path uses ocfs2_read_blocks_sync() instead and skips that validation, so an impossible bg_bits value can drive the bitmap walk past the end of the block. [FIX] Compute the bitmap capacity from the filesystem format with ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds that limit, and clamp the scan to the computed capacity. This keeps the freefrag report going while avoiding reads beyond the buffer. | |||||
| CVE-2026-53041 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ... [CAUSE] Commit 936b8834366e ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode. That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer. [FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero. That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer. | |||||
| CVE-2026-53042 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference. | |||||
| CVE-2026-53043 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer. - Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds. This patch (of 2): The qr_numregions field from a DLM_QUERY_REGION network message is used directly as loop bounds in dlm_match_regions() without checking against O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS (32) entries, a crafted message with qr_numregions > 32 causes out-of-bounds reads past the qr_regions buffer. Add a bounds check for qr_numregions before entering the loops. | |||||
| CVE-2026-53044 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup. | |||||
| CVE-2026-53007 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix potential NULL pointer deref in error path of ice_set_ringparam() ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without clearing ICE_TX_RING_FLAGS_TXTIME bit. When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent ice_setup_tx_ring() call fails, a NULL pointer dereference could happen in the unwinding sequence: ice_clean_tx_ring() -> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set) -> ice_free_tx_tstamp_ring() -> ice_free_tstamp_ring() -> tstamp_ring->desc (NULL deref) Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue. Note that this potential issue is found by manual code review. Compile test only since unfortunately I don't have E830 devices. | |||||
| CVE-2026-53008 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix race condition in TX timestamp ring cleanup Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map() that can cause a NULL pointer dereference. ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map call on another CPU to dereference the tstamp_ring, which could lead to a NULL pointer dereference. CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map() --------------------------------|--------------------------------- tx_ring->tstamp_ring = NULL | | ice_is_txtime_cfg() -> true | tstamp_ring = tx_ring->tstamp_ring | tstamp_ring->count // NULL deref! flags &= ~ICE_TX_FLAGS_TXTIME | Fix by: 1. Reordering ice_free_tx_tstamp_ring() to clear the flag before NULLing the pointer, with smp_wmb() to ensure proper ordering. 2. Adding smp_rmb() in ice_tx_map() after the flag check to order the flag read before the pointer read, using READ_ONCE() for the pointer, and adding a NULL check as a safety net. 3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag operations throughout the driver: - ICE_TX_RING_FLAGS_XDP - ICE_TX_RING_FLAGS_VLAN_L2TAG1 - ICE_TX_RING_FLAGS_VLAN_L2TAG2 - ICE_TX_RING_FLAGS_TXTIME | |||||
| CVE-2026-53010 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb2_open during durable reconnect In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference to the durable file descriptor early during the durable reconnect process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails) or a scavenger accesses the file, it leads to a use-after-free when accessing fp properties (eg fp->create_time). Move the single put to the end of the function below err_out2 so fp stays valid until smb2_open returns. | |||||
| CVE-2026-53011 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time. | |||||
| CVE-2026-53012 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL for the AF_INET member, leading to a NULL pointer dereference. Fix by calling nh_group_v4_update whenever the family changes, not just AF_INET to AF_INET6. Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1 [1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0 [2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 | |||||
| CVE-2026-53013 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1. This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb runs out of space, triggering a WARN_ON in rtnetlink and preventing the interface from being dumped. The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZE The bc_cutoff feature was added in commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff"), which added the nla_put_s32() call in macvlan_fill_info() but missed adding the corresponding nla_total_size(4) in macvlan_get_size(). A follow-up commit 55cef78c244d ("macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF") fixed the missing nla_policy entry but still did not fix the size calculation. | |||||
| CVE-2026-52945 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated--- | |||||
| CVE-2026-52946 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); <Interrupt> lock(&dev->event_lock); *** DEADLOCK *** | |||||
| CVE-2026-52947 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: <TASK> qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... </TASK> Fix this by deferring the reference count decrement until after the xa_erase() and the synchronize_rcu() complete. (Note: The v1 of this patch incorrectly replaced __sock_put() with sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove() still hold a reference to the socket, so freeing the socket memory here would lead to a subsequent UAF in the caller. Thus, the __sock_put() is kept, but only repositioned to close the RCU race.) | |||||
| CVE-2026-52948 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong timeout value` warning was observed, accompanied by SMBus controller state machine corruption. The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of 10 ms. The user argument is checked against INT_MAX, but it is subsequently multiplied by 10 before being passed to msecs_to_jiffies(). A malicious user can pass a large value (e.g., 429496729) that passes the `arg > INT_MAX` check but overflows when multiplied by 10. This results in a truncated 32-bit unsigned value that bypasses the internal `(int)m < 0` check in `msecs_to_jiffies()`. The truncated value is then assigned to `client->adapter->timeout` (a signed 32-bit int), which is reinterpreted as a negative number. When passed to wait_for_completion_timeout(), this negative value undergoes sign extension to a 64-bit unsigned long, triggering the `schedule_timeout` warning and causing premature returns. This leaves the SMBus state machine in an unrecoverable state, constituting a local Denial of Service (DoS). Fix this by bounding the user argument to `INT_MAX / 10`. [wsa: move the comment as well] | |||||