Total
18730 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-07-16 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | |||||
| CVE-2024-58093 | 1 Linux | 1 Linux Kernel | 2026-07-16 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix link state exit during switch upstream function removal Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free"), we would free the ASPM link only after the last function on the bus pertaining to the given link was removed. That was too late. If function 0 is removed before sibling function, link->downstream would point to free'd memory after. After above change, we freed the ASPM parent link state upon any function removal on the bus pertaining to a given link. That is too early. If the link is to a PCIe switch with MFD on the upstream port, then removing functions other than 0 first would free a link which still remains parent_link to the remaining downstream ports. The resulting GPFs are especially frequent during hot-unplug, because pciehp removes devices on the link bus in reverse order. On that switch, function 0 is the virtual P2P bridge to the internal bus. Free exactly when function 0 is removed -- before the parent link is obsolete, but after all subordinate links are gone. [kwilczynski: commit log] | |||||
| CVE-2026-15764 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-15 | N/A | 7.5 HIGH |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical) | |||||
| CVE-2026-15769 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-15 | N/A | 8.3 HIGH |
| Insufficient validation of untrusted input in Linux Toolkit Theming in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-15777 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-15 | N/A | 7.5 HIGH |
| Use after free in UI in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-53036 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced. | |||||
| CVE-2026-53035 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-53034 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated--- | |||||
| CVE-2026-53033 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-53031 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages(). | |||||
| CVE-2026-53029 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent uninitialized lcn caused by zero len syzbot reported a uninit-value in ntfs_iomap_begin [1]. Since runs was not touched yet, run_lookup_entry() immediately fails and returns false, which makes the value of "*len" 0. Simultaneously, the new value and err value are also 0, causing the logic in attr_data_get_block_locked() to jump directly to ok, ultimately resulting in *lcn being triggered before it is set [1]. In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward to before updating lcn to avoid this [1]. [1] BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110 Local variable lcn created at: ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786 | |||||
| CVE-2026-53028 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: Fix error pointer dereference The variable tps->partner is checked for an error pointer and then if it is, it sends an error message but does not return and then immediately dereferenced a few lines below: tps->partner = typec_register_partner(tps->port, &desc); if (IS_ERR(tps->partner)) dev_warn(tps->dev, "%s: failed to register partnet\n", __func__); if (desc.identity) { typec_partner_set_identity(tps->partner); cd321x->cur_partner_identity = st.partner_identity; } Add early return and fix spelling mistake in error message. Detected by Smatch: drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error: 'tps->partner' dereferencing possible ERR_PTR() | |||||
| CVE-2026-53026 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS. | |||||
| CVE-2026-53025 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback. | |||||
| CVE-2026-53020 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: um: Fix potential race condition in TLB sync During the TLB sync, we need to traverse and modify the page table, so we should hold the page table lock. Since full SMP support for threads within the same process is still missing, let's disable the split page table lock for simplicity. | |||||
| CVE-2026-53021 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file. | |||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | |||||
| CVE-2026-53023 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: terminate the cached volume label after UTF-8 conversion ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s() and stores the result in sbi->volume.label. The converted label is later exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only returns the number of bytes written and does not add a trailing NUL. If the converted label fills the entire fixed buffer, ntfs3_label_show() can read past the end of sbi->volume.label while looking for a terminator. Terminate the cached label explicitly after a successful conversion and clamp the exact-full case to the last byte of the buffer. | |||||
| CVE-2026-53024 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: <TASK> gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f Disconnect calls gb_connection_destroy, which ends up freeing the connection object. When gb_operation_sync is called in the write file operations, its gets a freed connection as parameter and the kernel panics. The gb_connection_destroy cannot be moved out of the disconnect function, as the Greybus subsystem expect all connections belonging to a bundle to be destroyed when disconnect returns. To prevent this bug, use a rw lock to synchronize access between write and disconnect. This guarantees that the write function doesn't try to use a disconnected connection. | |||||
| CVE-2026-53014 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir In tcf_blockcast_redir(), when iterating block ports to redirect packets to multiple devices, the mac_header_xmit flag is queried from the wrong device. The loop sends to dev_prev but queries dev_is_mac_header_xmit(dev) — which is the NEXT device in the iteration, not the one being sent to. This causes tcf_mirred_to_dev() to make incorrect decisions about whether to push or pull the MAC header. When the block contains mixed device types (e.g., an ethernet veth and a tunnel device), intermediate devices get the wrong mac_header_xmit flag, leading to skb header corruption. In the worst case, skb_push_rcsum with an incorrect mac_len can exhaust headroom and panic. The last device in the loop is handled correctly (line 365-366 uses dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste oversight for the intermediate devices. Fix by using dev_prev instead of dev for the mac_header_xmit query, consistent with the device actually being sent to. | |||||