Filtered by vendor Dlink
Subscribe
Total
1068 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-10967 | 2 D-link, Dlink | 4 Dir-550a Firmware, Dir-604m Firmware, Dir-550a and 1 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution. | |||||
| CVE-2018-10957 | 1 Dlink | 2 Dir-868l, Dir-868l Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components. | |||||
| CVE-2018-10824 | 1 Dlink | 15 Dir-140l, Dir-140l Firmware, Dir-640l and 12 more | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access. | |||||
| CVE-2018-10823 | 1 Dlink | 8 Dwr-111, Dwr-111 Firmware, Dwr-116 and 5 more | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals. | |||||
| CVE-2018-10822 | 1 Dlink | 15 Dir-140l, Dir-140l Firmware, Dir-640l and 12 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Directory traversal vulnerability in the web interface on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices allows remote attackers to read arbitrary files via a /.. or // after "GET /uir" in an HTTP request. NOTE: this vulnerability exists because of an incorrect fix for CVE-2017-6190. | |||||
| CVE-2018-10750 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 9.3 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10749 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10748 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10747 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10746 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'get' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'get <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10713 | 2 D-link, Dlink | 2 Dsl-3782 Firmware, Dsl-3782 | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code. | |||||
| CVE-2018-10641 | 1 Dlink | 2 Dir-600l, Dir-601 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.1 HIGH |
| D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext. | |||||
| CVE-2018-10431 | 2 D-link, Dlink | 2 Dir-615 Firmware, Dir-615 | 2024-11-21 | 6.5 MEDIUM | 7.2 HIGH |
| D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen. | |||||
| CVE-2018-10110 | 2 D-link, Dlink | 2 Dir-615 T1 Firmware, Dir-615 T1 | 2024-11-21 | 3.5 LOW | 4.8 MEDIUM |
| D-Link DIR-615 T1 devices allow XSS via the Add User feature. | |||||
| CVE-2018-10108 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have XSS in the Treturn parameter to /htdocs/webinc/js/bsc_sms_inbox.php. | |||||
| CVE-2018-10107 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have XSS in the RESULT parameter to /htdocs/webinc/js/info.php. | |||||
| CVE-2018-10106 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DIR-815 REV. B (with firmware through DIR-815_REVB_FIRMWARE_PATCH_2.07.B01) devices have permission bypass and information disclosure in /htdocs/web/getcfg.php, as demonstrated by a /getcfg.php?a=%0a_POST_SERVICES%3DDEVICE.ACCOUNT%0aAUTHORIZED_GROUP%3D1 request. | |||||
| CVE-2017-8417 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 3.3 LOW | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device requires that a user logging into the device provide a username and password. However, the device allows D-Link apps on the mobile devices and desktop to communicate with the device without any authentication. As a part of that communication, the device uses custom version of base64 encoding to pass data back and forth between the apps and the device. However, the same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third party to retrieve the device's password without any authentication by sending just 1 UDP packet with custom base64 encoding. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there. | |||||
| CVE-2017-8416 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 8.3 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding. | |||||
| CVE-2017-8415 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only. | |||||