Filtered by vendor Siemens
Subscribe
Total
2107 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-49252 | 1 Siemens | 1 Simatic Cn 4100 | 2024-11-21 | N/A | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The affected application allows IP configuration change without authentication to the device. This could allow an attacker to cause denial of service condition. | |||||
| CVE-2023-49251 | 1 Siemens | 1 Simatic Cn 4100 | 2024-11-21 | N/A | 8.8 HIGH |
| A vulnerability has been identified in SIMATIC CN 4100 (All versions < V2.7). The "intermediate installation" system state of the affected application allows an attacker to add their own login credentials to the device. This allows an attacker to remotely login as root and take control of the device even after the affected device is fully set up. | |||||
| CVE-2023-49132 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2023-49131 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2023-49130 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | |||||
| CVE-2023-49129 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected applications contain a stack overflow vulnerability while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49128 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application contains an out of bounds write past the end of an allocated buffer while parsing a specially crafted PAR file. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49127 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49126 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49125 | 1 Siemens | 3 Parasolid, Solid Edge Se2023, Solid Edge Se2024 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Parasolid V35.0 (All versions < V35.0.263), Parasolid V35.1 (All versions < V35.1.252), Parasolid V36.0 (All versions < V36.0.198), Solid Edge SE2023 (All versions < V223.0 Update 11), Solid Edge SE2024 (All versions < V224.0 Update 3). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted files containing XT format. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49124 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49123 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to heap-based buffer overflow while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49122 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to heap-based buffer overflow while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-49121 | 1 Siemens | 1 Solid Edge Se2023 | 2024-11-21 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to heap-based buffer overflow while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. | |||||
| CVE-2023-48431 | 1 Siemens | 1 Sinec Ins | 2024-11-21 | N/A | 6.8 MEDIUM |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). Affected software does not correctly validate the response received by an UMC server. An attacker can use this to crash the affected software by providing and configuring a malicious UMC server or by manipulating the traffic from a legitimate UMC server (i.e. leveraging CVE-2023-48427). | |||||
| CVE-2023-48430 | 1 Siemens | 1 Sinec Ins | 2024-11-21 | N/A | 2.7 LOW |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). The REST API of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the API. The server will automatically restart. | |||||
| CVE-2023-48429 | 1 Siemens | 1 Sinec Ins | 2024-11-21 | N/A | 2.7 LOW |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). The Web UI of affected devices does not check the length of parameters in certain conditions. This allows a malicious admin to crash the server by sending a crafted request to the server. The server will automatically restart. | |||||
| CVE-2023-48428 | 1 Siemens | 1 Sinec Ins | 2024-11-21 | N/A | 7.2 HIGH |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). The radius configuration mechanism of affected products does not correctly check uploaded certificates. A malicious admin could upload a crafted certificate resulting in a denial-of-service condition or potentially issue commands on system level. | |||||
| CVE-2023-48427 | 1 Siemens | 1 Sinec Ins | 2024-11-21 | N/A | 8.1 HIGH |
| A vulnerability has been identified in SINEC INS (All versions < V1.0 SP2 Update 2). Affected products do not properly validate the certificate of the configured UMC server. This could allow an attacker to intercept credentials that are sent to the UMC server as well as to manipulate responses, potentially allowing an attacker to escalate privileges. | |||||
| CVE-2023-48364 | 1 Siemens | 6 Openpcs 7, Simatic Batch, Simatic Pcs 7 and 3 more | 2024-11-21 | N/A | 6.5 MEDIUM |
| A vulnerability has been identified in OpenPCS 7 V9.1 (All versions < V9.1 SP2 UC05), SIMATIC BATCH V9.1 (All versions < V9.1 SP2 UC05), SIMATIC PCS 7 V9.1 (All versions < V9.1 SP2 UC05), SIMATIC Route Control V9.1 (All versions < V9.1 SP2 UC05), SIMATIC WinCC Runtime Professional V18 (All versions < V18 Update 4), SIMATIC WinCC Runtime Professional V19 (All versions < V19 Update 2), SIMATIC WinCC V7.4 (All versions), SIMATIC WinCC V7.5 (All versions < V7.5 SP2 Update 15), SIMATIC WinCC V8.0 (All versions < V8.0 Update 4). The implementation of the RPC (Remote Procedure call) communication protocol in the affected products do not properly handle certain malformed RPC messages. An attacker could use this vulnerability to cause a denial of service condition in the RPC server. | |||||