Total
362414 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53048 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that. | |||||
| CVE-2026-53047 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect sizeof in phys array reallocation The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but pointers are 32-bit, this allocates half the required space, which might lead to a heap buffer overflow when storing physical addresses. This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader: fix incorrect allocation size") which fixed the same issue at the initial allocation site. | |||||
| CVE-2026-53042 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference. | |||||
| CVE-2026-53039 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup. | |||||
| CVE-2026-53038 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ima_fs: Correctly create securityfs files for unsupported hash algos ima_tpm_chip->allocated_banks[i].crypto_id is initialized to HASH_ALGO__LAST if the TPM algorithm is not supported. However there are places relying on the algorithm to be valid because it is accessed by hash_algo_name[]. On 6.12.40 I observe the following read out-of-bounds in hash_algo_name: ================================================================== BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440 Read of size 8 at addr ffffffff83e18138 by task swapper/0/1 CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3 Call Trace: <TASK> dump_stack_lvl+0x61/0x90 print_report+0xc4/0x580 ? kasan_addr_to_slab+0x26/0x80 ? create_securityfs_measurement_lists+0x396/0x440 kasan_report+0xc2/0x100 ? create_securityfs_measurement_lists+0x396/0x440 create_securityfs_measurement_lists+0x396/0x440 ima_fs_init+0xa3/0x300 ima_init+0x7d/0xd0 init_ima+0x28/0x100 do_one_initcall+0xa6/0x3e0 kernel_init_freeable+0x455/0x740 kernel_init+0x24/0x1d0 ret_from_fork+0x38/0x80 ret_from_fork_asm+0x11/0x20 </TASK> The buggy address belongs to the variable: hash_algo_name+0xb8/0x420 Memory state around the buggy address: ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9 ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9 ^ ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9 ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9 ================================================================== Seems like the TPM chip supports sha3_256, which isn't yet in tpm_algorithms: tpm tpm0: TPM with unsupported bank algorithm 0x0027 That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0 Library Part 2: Structures", page 51 [1]. See also the related U-Boot algorithms update [2]. Thus solve the problem by creating a file name with "_tpm_alg_<ID>" postfix if the crypto algorithm isn't initialized. This is how it looks on the test machine (patch ported to v6.12 release): # ls -1 /sys/kernel/security/ima/ ascii_runtime_measurements ascii_runtime_measurements_tpm_alg_27 ascii_runtime_measurements_sha1 ascii_runtime_measurements_sha256 binary_runtime_measurements binary_runtime_measurements_tpm_alg_27 binary_runtime_measurements_sha1 binary_runtime_measurements_sha256 policy runtime_measurements_count violations [1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf [2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html | |||||
| CVE-2026-53037 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them. | |||||
| CVE-2026-53035 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-53034 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated--- | |||||
| CVE-2026-53032 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL deref in map_kptr_match_type for scalar regs Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr") refactored map_kptr_match_type() to branch on btf_is_kernel() before checking base_type(). A scalar register stored into a kptr slot has no btf, so the btf_is_kernel(reg->btf) call dereferences NULL. Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf access. | |||||
| CVE-2026-53030 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers() The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup attribute to automatically free the memory when the variable goes out of scope. | |||||
| CVE-2026-53029 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent uninitialized lcn caused by zero len syzbot reported a uninit-value in ntfs_iomap_begin [1]. Since runs was not touched yet, run_lookup_entry() immediately fails and returns false, which makes the value of "*len" 0. Simultaneously, the new value and err value are also 0, causing the logic in attr_data_get_block_locked() to jump directly to ok, ultimately resulting in *lcn being triggered before it is set [1]. In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward to before updating lcn to avoid this [1]. [1] BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825 iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110 Local variable lcn created at: ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786 | |||||
| CVE-2026-53028 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: Fix error pointer dereference The variable tps->partner is checked for an error pointer and then if it is, it sends an error message but does not return and then immediately dereferenced a few lines below: tps->partner = typec_register_partner(tps->port, &desc); if (IS_ERR(tps->partner)) dev_warn(tps->dev, "%s: failed to register partnet\n", __func__); if (desc.identity) { typec_partner_set_identity(tps->partner); cd321x->cur_partner_identity = st.partner_identity; } Add early return and fix spelling mistake in error message. Detected by Smatch: drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error: 'tps->partner' dereferencing possible ERR_PTR() | |||||
| CVE-2026-53027 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked() When a compressed or sparse attribute has its clusters frame-aligned, vcn is rounded down to the frame start using cmask, which can result in vcn != vcn0. In this case, vcn and vcn0 may reside in different attribute segments. The code already handles the case where vcn is in a different segment by loading its runs before allocation. However, it fails to load runs for vcn0 when vcn0 resides in a different segment than vcn. This causes run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was never loaded into the in-memory run list, triggering the WARN_ON(1). Fix this by adding a missing check for vcn0 after the existing vcn segment check. If vcn0 falls outside the current segment range [svcn, evcn1), find and load the attribute segment containing vcn0 before performing the run lookup. The following scenario triggers the bug: attr_data_get_block_locked() vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment load runs for vcn segment <- vcn0 segment not loaded! attr_allocate_clusters() <- allocation succeeds run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN WARN_ON(1) <- bug fires here! | |||||
| CVE-2026-53023 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: terminate the cached volume label after UTF-8 conversion ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s() and stores the result in sbi->volume.label. The converted label is later exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only returns the number of bytes written and does not add a trailing NUL. If the converted label fills the entire fixed buffer, ntfs3_label_show() can read past the end of sbi->volume.label while looking for a terminator. Terminate the cached label explicitly after a successful conversion and clamp the exact-full case to the last byte of the buffer. | |||||
| CVE-2026-53022 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | |||||
| CVE-2026-53021 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file. | |||||
| CVE-2026-53019 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc() Fix inverted condition that skips frequency change trigger, causing kernel panics during cpufreq scaling. | |||||
| CVE-2026-53018 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid reading already updated pages during GC We found the following issue during fuzz testing: page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9 memcg:f8ffff800e269c00 aops:f2fs_meta_aops ino:2 flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a) raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618 raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00 page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio)) page_owner tracks the page as allocated post_alloc_hook+0x58c/0x5ec prep_new_page+0x34/0x284 get_page_from_freelist+0x2dcc/0x2e8c __alloc_pages_noprof+0x280/0x76c __folio_alloc_noprof+0x18/0xac __filemap_get_folio+0x6bc/0xdc4 pagecache_get_page+0x3c/0x104 do_garbage_collect+0x5c78/0x77a4 f2fs_gc+0xd74/0x25f0 gc_thread_func+0xb28/0x2930 kthread+0x464/0x5d8 ret_from_fork+0x10/0x20 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1563! folio_end_read+0x140/0x168 f2fs_finish_read_bio+0x5c4/0xb80 f2fs_read_end_io+0x64c/0x708 bio_endio+0x85c/0x8c0 blk_update_request+0x690/0x127c scsi_end_request+0x9c/0xb8c scsi_io_completion+0xf0/0x250 scsi_finish_command+0x430/0x45c scsi_complete+0x178/0x6d4 blk_mq_complete_request+0xcc/0x104 scsi_done_internal+0x214/0x454 scsi_done+0x24/0x34 which is similar to the problem reported by syzbot: https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc This case is consistent with the description in commit 9bf1a3f ("f2fs: avoid GC causing encrypted file corrupted"): Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after being written it is marked as uptodate. Then, Page 1 is moved from blkaddr B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by ra_data_block. There is no need to read Page 1 again from blkaddr B, since it has already been updated. Therefore, avoid initiating I/O in this case. | |||||
| CVE-2026-53017 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_flush_nat_entries - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return false SPO and lost 'file A' f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC flags for the nat_entry, but this does not mean that the checkpoint has actually completed successfully. However, f2fs_need_inode_block_update() checks these flags and incorrectly assumes that the checkpoint has finished. The root cause is that the semantics of IS_CHECKPOINTED and HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully completes. This patch modifies f2fs_need_inode_block_update() to acquire the sbi->node_write lock before reading the nat_entry flags, ensuring that once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the checkpoint operation has already completed. | |||||
| CVE-2026-53015 | 2026-06-24 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com | |||||