Total
365230 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53250 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. | |||||
| CVE-2026-40355 | 1 Mit | 1 Kerberos 5 | 2026-07-08 | N/A | 5.9 MEDIUM |
| In MIT Kerberos 5 (aka krb5) before 1.22.3, there is a NULL pointer dereference if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, causing the process to terminate in parse_nego_message. | |||||
| CVE-2026-40356 | 1 Mit | 1 Kerberos 5 | 2026-07-08 | N/A | 5.9 MEDIUM |
| In MIT Kerberos 5 (aka krb5) before 1.22.3, there is an integer underflow and resultant out-of-bounds read if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, possibly causing the process to terminate in parse_message. | |||||
| CVE-2026-13149 | 2026-07-08 | N/A | N/A | ||
| brace-expansion through 5.0.6 is vulnerable to denial of service. The expand() function exhibits exponential-time complexity in the number of consecutive non-expanding '{}' brace groups. An attacker who passes a crafted string to expand(), directly or transitively, can cause significant CPU consumption and event-loop blocking. The max option does not mitigate this, as it bounds the output size rather than the recursion work. | |||||
| CVE-2026-9165 | 2026-07-08 | N/A | 7.7 HIGH | ||
| A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane. | |||||
| CVE-2026-56211 | 2026-07-08 | N/A | 7.1 HIGH | ||
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. | |||||
| CVE-2026-56210 | 2026-07-08 | N/A | 7.1 HIGH | ||
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). | |||||
| CVE-2026-56209 | 2026-07-08 | N/A | 7.1 HIGH | ||
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. | |||||
| CVE-2026-56208 | 2026-07-08 | N/A | 7.6 HIGH | ||
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. | |||||
| CVE-2026-11837 | 2026-07-08 | N/A | 7.3 HIGH | ||
| A local privilege escalation vulnerability was found in the ansible.posix authorized_key module. The module's keyfile() function uses os.chown() instead of os.lchown() and opens files without O_NOFOLLOW when managing SSH authorized keys. An unprivileged local user can pre-stage symbolic links in their ~/.ssh directory to redirect file ownership changes to arbitrary system paths when an operator runs the authorized_key task as root, leading to local privilege escalation. | |||||
| CVE-2025-6297 | 1 Debian | 1 Dpkg | 2026-07-08 | N/A | 8.2 HIGH |
| It was discovered that dpkg-deb does not properly sanitize directory permissions when extracting a control member into a temporary directory, which is documented as being a safe operation even on untrusted data. This may result in leaving temporary files behind on cleanup. Given automated and repeated execution of dpkg-deb commands on adversarial .deb packages or with well compressible files, placed inside a directory with permissions not allowing removal by a non-root user, this can end up in a DoS scenario due to causing disk quota exhaustion or disk full conditions. | |||||
| CVE-2026-53359 | 2026-07-08 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | |||||
| CVE-2026-44938 | 2026-07-08 | N/A | 8.8 HIGH | ||
| A vulnerability has been identified in Fleet's agent-side deployer, which did not filter security-sensitive keys from namespaceLabels in fleet.yaml (or BundleDeployment.spec.options.namespaceLabels) when applying them to the target namespace. An attacker with git push access to a Fleet-monitored repository could overwrite Pod Security Standards (PSS) enforcement labels on a target namespace. This allows the attacker to weaken admission controls and deploy workloads that PSS policies would otherwise block. | |||||
| CVE-2026-21383 | 1 Qualcomm | 106 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 103 more | 2026-07-08 | N/A | 7.1 HIGH |
| Cryptographic Issue when using a static initialization vector for AES-GCM key wrapping, which requires a unique value for each call to ensure security. | |||||
| CVE-2025-53830 | 2026-07-08 | N/A | 9.1 CRITICAL | ||
| Anti-Virus for ownCloud is an anti-virus application for file storage, synchronization, and sharing application ownCloud. Versions of Anti-Virus for ownCloud before 1.2.3 are vulnerable to Server-Side Request Forgery (SSRF). This corresponds to versions of ownCloud 10 prior to 10.15.3. Upgrade ownCloud 10 to version 10.15.3 or later or upgrade Anti-Virus for ownCloud 10 to version 1.2.3 or later to receive a fix. | |||||
| CVE-2025-53829 | 2026-07-08 | N/A | 8.0 HIGH | ||
| ownCloud is a file storage, synchronization, and sharing application. In ownCloud 10 prior to version 10.15.3, an attacker with administrative privileges can exploit a path traversal vulnerability in the system to execute arbitrary code. Upgrade ownCloud 10 to version 10.15.3 or later to receive a patch. | |||||
| CVE-2025-53828 | 2026-07-08 | N/A | 8.5 HIGH | ||
| SharePoint for ownCloud is an application for using SharePoint with the file storage, synchronization, and sharing application ownCloud Classic. In SharePoint for ownCloud prior to version 0.4.1, which corresponds to ownCloud 10 prior to 10.15.3, an attacker with administrative privileges can use a SSRF vulnerability in the SharePoint app to execute arbitrary code on the system. Upgrade ownCloud 10 to version 10.15.3 or later to receive SharePoint for ownCloud 0.4.1, the fixed version. | |||||
| CVE-2025-53827 | 2026-07-08 | N/A | 9.1 CRITICAL | ||
| ownCloud Core is the server-side component of the file storage, synchronization, and sharing application ownCloud Classic. In versions prior to 10.15.3, the Updater on ownCloud 10 before 10.15.3 has an exposed dangerous method or function. Attackers with administrative privileges may leverage functionality to execute arbitrary code. This issue has been fixed in version 10.15.3. | |||||
| CVE-2026-53263 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. | |||||
| CVE-2026-53264 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: use RCU with deferred freeing for action lifecycle When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur. | |||||