Filtered by vendor Cisco
Subscribe
Total
6636 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-20467 | 1 Cisco | 1 Ios Xe | 2026-06-17 | N/A | 8.6 HIGH |
| A vulnerability in the implementation of the IPv4 fragmentation reassembly code in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper management of resources during fragment reassembly. An attacker could exploit this vulnerability by sending specific sizes of fragmented packets to an affected device or through a Virtual Fragmentation Reassembly (VFR)-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: This vulnerability affects Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers if they are running Cisco IOS XE Software Release 17.12.1 or 17.12.1a. | |||||
| CVE-2024-20466 | 1 Cisco | 1 Identity Services Engine | 2026-06-17 | N/A | 6.5 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device. This vulnerability is due to improper enforcement of administrative privilege levels for high-value sensitive data. An attacker with read-only Administrator privileges for the web-based management interface on an affected device could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to collect sensitive information regarding the configuration of the system. | |||||
| CVE-2024-20465 | 1 Cisco | 1 Ios | 2026-06-17 | N/A | 5.8 MEDIUM |
| A vulnerability in the access control list (ACL) programming of Cisco IOS Software running on Cisco Industrial Ethernet 4000, 4010, and 5000 Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to the incorrect handling of IPv4 ACLs on switched virtual interfaces when an administrator enables and disables Resilient Ethernet Protocol (REP). An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. | |||||
| CVE-2024-20464 | 1 Cisco | 1 Ios Xe | 2026-06-17 | N/A | 8.6 HIGH |
| A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet. | |||||
| CVE-2024-20463 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 5.4 MEDIUM |
| A vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to modify the configuration or reboot an affected device. This vulnerability is due to the HTTP server allowing state changes in GET requests. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface on an affected device. A successful exploit could allow the attacker to make limited modifications to the configuration or reboot the device, resulting in a denial of service (DoS) condition. | |||||
| CVE-2024-20462 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 5.5 MEDIUM |
| A vulnerability in the web-based management interface of Cisco ATA 190 Series Multiplatform Analog Telephone Adapter firmware could allow an authenticated, local attacker with low privileges to view passwords on an affected device. This vulnerability is due to incorrect sanitization of HTML content from an affected device. A successful exploit could allow the attacker to view passwords that belong to other users. | |||||
| CVE-2024-20461 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 6.0 MEDIUM |
| A vulnerability in the CLI of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an authenticated, local attacker with high privileges to execute arbitrary commands as the root user. This vulnerability exists because CLI input is not properly sanitized. An attacker could exploit this vulnerability by sending malicious characters to the CLI. A successful exploit could allow the attacker to read and write to the underlying operating system as the root user. | |||||
| CVE-2024-20460 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 6.1 MEDIUM |
| A vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information on an affected device. | |||||
| CVE-2024-20459 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 6.5 MEDIUM |
| A vulnerability in the web-based management interface of Cisco ATA 190 Multiplatform Series Analog Telephone Adapter firmware could allow an authenticated, remote attacker with high privileges to execute arbitrary commands as the root user on the underlying operating system. This vulnerability is due to a lack of input sanitization in the web-based management interface. An attacker could exploit this vulnerability by sending a malicious request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. | |||||
| CVE-2024-20458 | 1 Cisco | 4 Ata 191, Ata 191 Firmware, Ata 192 and 1 more | 2026-06-17 | N/A | 8.2 HIGH |
| A vulnerability in the web-based management interface of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to view or delete the configuration or change the firmware on an affected device. This vulnerability is due to a lack of authentication on specific HTTP endpoints. An attacker could exploit this vulnerability by browsing to a specific URL. A successful exploit could allow the attacker to view or delete the configuration or change the firmware. | |||||
| CVE-2024-20457 | 1 Cisco | 1 Unified Communications Manager Im And Presence Service | 2026-06-17 | N/A | 6.5 MEDIUM |
| A vulnerability in the logging component of Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability is due to the storage of unencrypted credentials in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to access sensitive information from the device. | |||||
| CVE-2024-20456 | 1 Cisco | 59 8011-4g24y4h-i, 8101-32fh, 8101-32fh-o and 56 more | 2026-06-17 | N/A | 6.7 MEDIUM |
| A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Cisco Secure Boot functionality and load unverified software on an affected device. To exploit this successfully, the attacker must have root-system privileges on the affected device. This vulnerability is due to an error in the software build process. An attacker could exploit this vulnerability by manipulating the system’s configuration options to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass of the requirement to run Cisco signed images or alter the security properties of the running system. | |||||
| CVE-2024-20455 | 1 Cisco | 2 Ios Xe, Ios Xe Sd-wan | 2026-06-17 | N/A | 8.6 HIGH |
| A vulnerability in the process that classifies traffic that is going to the Unified Threat Defense (UTD) component of Cisco IOS XE Software in controller mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because UTD improperly handles certain packets as those packets egress an SD-WAN IPsec tunnel. An attacker could exploit this vulnerability by sending crafted traffic through an SD-WAN IPsec tunnel that is configured on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: SD-WAN tunnels that are configured with Generic Routing Encapsulation (GRE) are not affected by this vulnerability. | |||||
| CVE-2024-20454 | 1 Cisco | 22 Spa 301 1 Line Ip Phone, Spa 301 Firmware, Spa 303 3 Line Ip Phone and 19 more | 2026-06-17 | N/A | 9.8 CRITICAL |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system with root privileges. These vulnerabilities exist because incoming HTTP packets are not properly checked for errors, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to overflow an internal buffer and execute arbitrary commands at the root privilege level. | |||||
| CVE-2024-20451 | 1 Cisco | 22 Spa 301 1 Line Ip Phone, Spa 301 Firmware, Spa 303 3 Line Ip Phone and 19 more | 2026-06-17 | N/A | 7.5 HIGH |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. These vulnerabilities exist because HTTP packets are not properly checked for errors. An attacker could exploit this vulnerability by sending a crafted HTTP packet to the remote interface of an affected device. A successful exploit could allow the attacker to cause a DoS condition on the device. | |||||
| CVE-2024-20450 | 1 Cisco | 22 Spa 301 1 Line Ip Phone, Spa 301 Firmware, Spa 303 3 Line Ip Phone and 19 more | 2026-06-17 | N/A | 9.8 CRITICAL |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business SPA300 Series IP Phones and Cisco Small Business SPA500 Series IP Phones could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system with root privileges. These vulnerabilities exist because incoming HTTP packets are not properly checked for errors, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to overflow an internal buffer and execute arbitrary commands at the root privilege level. | |||||
| CVE-2024-20449 | 1 Cisco | 1 Nexus Dashboard Fabric Controller | 2026-06-17 | N/A | 8.8 HIGH |
| A vulnerability in Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, remote attacker with low privileges to execute arbitrary code on an affected device. This vulnerability is due to improper path validation. An attacker could exploit this vulnerability by using the Secure Copy Protocol (SCP) to upload malicious code to an affected device using path traversal techniques. A successful exploit could allow the attacker to execute arbitrary code in a specific container with the privileges of root. | |||||
| CVE-2024-20448 | 1 Cisco | 1 Nexus Dashboard Fabric Controller | 2026-06-17 | N/A | 6.3 MEDIUM |
| A vulnerability in the Cisco Nexus Dashboard Fabric Controller (NDFC) software, formerly Cisco Data Center Network Manager (DCNM), could allow an attacker with access to a backup file to view sensitive information. This vulnerability is due to the improper storage of sensitive information within config only and full backup files. An attacker could exploit this vulnerability by parsing the contents of a backup file that is generated from an affected device. A successful exploit could allow the attacker to access sensitive information, including NDFC-connected device credentials, the NDFC site manager private key, and the scheduled backup file encryption key. | |||||
| CVE-2024-20445 | 1 Cisco | 36 Desk Phone 9841, Desk Phone 9841 Firmware, Desk Phone 9851 and 33 more | 2026-06-17 | N/A | 5.3 MEDIUM |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device. This vulnerability is due to improper storage of sensitive information within the web UI of Session Initiation Protocol (SIP)-based phone loads. An attacker could exploit this vulnerability by browsing to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information, including incoming and outgoing call records. Note: Web Access is disabled by default. | |||||
| CVE-2024-20444 | 1 Cisco | 1 Nexus Dashboard Fabric Controller | 2026-06-17 | N/A | 5.5 MEDIUM |
| A vulnerability in Cisco Nexus Dashboard Fabric Controller (NDFC), formerly Cisco Data Center Network Manager (DCNM), could allow an authenticated, remote attacker with network-admin privileges to perform a command injection attack against an affected device. This vulnerability is due to insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted command arguments to a specific REST API endpoint. A successful exploit could allow the attacker to overwrite sensitive files or crash a specific container, which would restart on its own, causing a low-impact denial of service (DoS) condition. | |||||