Filtered by vendor Cisco
Subscribe
Total
6637 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-6744 | 1 Cisco | 1 Ios | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6742 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6741 | 1 Cisco | 1 Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6739 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6738 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6737 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6736 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6735 | 1 Cisco | 1 Firesight System Software | 2026-06-17 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the backup and restore functionality of Cisco FireSIGHT System Software could allow an authenticated, local attacker to execute arbitrary code on a targeted system. More Information: CSCvc91092. Known Affected Releases: 6.2.0 6.2.1. | |||||
| CVE-2017-6734 | 1 Cisco | 1 Identity Services Engine | 2026-06-17 | 3.5 LOW | 5.4 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) Software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected device, related to the Guest Portal. More Information: CSCvd74794. Known Affected Releases: 1.3(0.909) 2.1(0.800). | |||||
| CVE-2017-6733 | 1 Cisco | 1 Identity Services Engine | 2026-06-17 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web-based application interface of the Cisco Identity Services Engine (ISE) portal could allow an unauthenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web interface of an affected system. More Information: CSCvd87482. Known Affected Releases: 2.1(102.101) 2.2(0.283) 2.3(0.151). | |||||
| CVE-2017-6732 | 1 Cisco | 1 Prime Network | 2026-06-17 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2). | |||||
| CVE-2017-6731 | 1 Cisco | 1 Ios Xr | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST. | |||||
| CVE-2017-6730 | 1 Cisco | 1 Wide Area Application Services | 2026-06-17 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the web-based GUI of Cisco Wide Area Application Services (WAAS) Central Manager could allow an unauthenticated, remote attacker to retrieve completed reports from an affected system, aka Information Disclosure. This vulnerability affects the following products if they are running an affected release of Cisco Wide Area Application Services (WAAS) Software and are configured to use the Central Manager function: Cisco Virtual Wide Area Application Services (vWAAS), Cisco Wide Area Application Services (WAAS) Appliances, Cisco Wide Area Application Services (WAAS) Modules. Only Cisco WAAS products that are configured with the Central Manager role are affected by this vulnerability. More Information: CSCvd87574. Known Affected Releases: 4.4(7) 6.2(1) 6.2(3). Known Fixed Releases: 6.3(0.228) 6.3(0.226) 6.2(3d)8 5.5(7b)17. | |||||
| CVE-2017-6729 | 1 Cisco | 2 Asr 5000, Asr 5000 Software | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Border Gateway Protocol (BGP) processing functionality of the Cisco StarOS operating system for Cisco ASR 5000 Series Routers and Cisco Virtualized Packet Core (VPC) Software could allow an unauthenticated, remote attacker to cause the BGP process on an affected system to reload, resulting in a denial of service (DoS) condition. This vulnerability affects the following products if they are running the Cisco StarOS operating system and BGP is enabled for the system: Cisco ASR 5000 Series Routers and Cisco Virtualized Packet Core Software. More Information: CSCvc44968. Known Affected Releases: 16.4.1 19.1.0 21.1.0 21.1.M0.65824. Known Fixed Releases: 21.3.A0.65902 21.2.A0.65905 21.1.b0.66164 21.1.V0.66014 21.1.R0.65898 21.1.M0.65894 21.1.0.66030 21.1.0. | |||||
| CVE-2017-6728 | 1 Cisco | 1 Ios Xr | 2026-06-17 | 6.9 MEDIUM | 7.0 HIGH |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary code at the root privilege level on an affected system, because of Incorrect Permissions. More Information: CSCvb99389. Known Affected Releases: 6.2.1.BASE. Known Fixed Releases: 6.3.1.15i.BASE 6.2.3.1i.BASE 6.2.2.15i.BASE 6.1.4.10i.BASE. | |||||
| CVE-2017-6727 | 1 Cisco | 1 Wide Area Application Services | 2026-06-17 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the Server Message Block (SMB) protocol of Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device due to a process restarting unexpectedly and creating Core Dump files. More Information: CSCvc63035. Known Affected Releases: 6.2(3a). Known Fixed Releases: 6.3(0.167) 6.2(3c)5 6.2(3.22). | |||||
| CVE-2017-6726 | 1 Cisco | 1 Prime Network | 2026-06-17 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in the CLI of the Cisco Prime Network Gateway could allow an authenticated, local attacker to retrieve system process information, which could lead to the disclosure of confidential information. More Information: CSCvd59341. Known Affected Releases: 4.2(1.0)P1. | |||||
| CVE-2017-6725 | 1 Cisco | 1 Prime Infrastructure | 2026-06-17 | 4.3 MEDIUM | 6.1 MEDIUM |
| A vulnerability in the web framework code of Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. More Information: CSCuw65833 CSCuw65837. Known Affected Releases: 2.2(2). | |||||