Total
358423 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-42508 | 1 Golang | 1 Crypto | 2026-05-28 | N/A | 9.1 CRITICAL |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. | |||||
| CVE-2026-23300 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop. | |||||
| CVE-2026-46595 | 1 Golang | 1 Crypto | 2026-05-28 | N/A | 10.0 CRITICAL |
| Previously, CVE-2024-45337 fixed an authorization bypass for misused ssh server configurations; if any other type of callback is passed other than public key, then the source-address validation would be skipped. | |||||
| CVE-2026-23301 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Add allocation failure check for Entity name Currently find_sdca_entity_iot() can allocate a string for the Entity name but it doesn't check if that allocation succeeded. Add the missing NULL check after the allocation. | |||||
| CVE-2026-46597 | 1 Golang | 1 Crypto | 2026-05-28 | N/A | 7.5 HIGH |
| An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs. | |||||
| CVE-2026-23302 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: annotate data-races around sk->sk_{data_ready,write_space} skmsg (and probably other layers) are changing these pointers while other cpus might read them concurrently. Add corresponding READ_ONCE()/WRITE_ONCE() annotations for UDP, TCP and AF_UNIX. | |||||
| CVE-2026-23303 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials. | |||||
| CVE-2026-46598 | 1 Golang | 1 Crypto | 2026-05-28 | N/A | 5.3 MEDIUM |
| For certain crafted inputs, a 'ed25519.PrivateKey' was created by casting malformed wire bytes, leading to a panic when used. | |||||
| CVE-2026-23304 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too. | |||||
| CVE-2026-5272 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-28 | N/A | 8.8 HIGH |
| Heap buffer overflow in GPU in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-23305 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix unwinding in error path in rocket_probe When rocket_core_init() fails (as could be the case with EPROBE_DEFER), we need to properly unwind by decrementing the counter we just incremented and if this is the first core we failed to probe, remove the rocket DRM device with rocket_device_fini() as well. This matches the logic in rocket_remove(). Failing to properly unwind results in out-of-bounds accesses. | |||||
| CVE-2026-9572 | 1 Gpac | 1 Gpac | 2026-05-28 | 1.7 LOW | 3.3 LOW |
| A security vulnerability has been detected in GPAC up to 2.4.0. Affected by this issue is the function Media_GetSample of the file src/isomedia/media.c of the component MP4Box. Such manipulation of the argument cat leads to memory leak. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used. The name of the patch is e79c5cbe8b3fed27f4854ec229457d30c96206f1. It is best practice to apply a patch to resolve this issue. | |||||
| CVE-2026-23306 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled. | |||||
| CVE-2026-44214 | 1 Rexxars | 1 Eventsource-encoder | 2026-05-28 | N/A | 5.8 MEDIUM |
| eventsource-encoder encodes events as well-formed EventSource/Server Sent Event (SSE) messages. Prior to 1.0.2, eventsource-encoder does not sanitize the event or id fields of an EventSourceMessage before serializing them. An attacker who controls either field can inject arbitrary Server-Sent Events line terminators (\n, \r, or \r\n) and thereby forge additional SSE fields or entire messages on the stream. This vulnerability is fixed in 1.0.2. | |||||
| CVE-2026-23307 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message. | |||||
| CVE-2026-32201 | 1 Microsoft | 1 Sharepoint Server | 2026-05-28 | N/A | 6.5 MEDIUM |
| Improper input validation in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network. | |||||
| CVE-2026-23308 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: equilibrium: fix warning trace on load The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also called in the callback function 'eqbr_irq_mask_ack()'. This is done to avoid source code duplication. The problem, is that in the function 'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()' This generates the following warning trace in the log for every gpio on load. [ 6.088111] ------------[ cut here ]------------ [ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50 [ 6.097847] Modules linked in: [ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0 [ 6.097847] Tainted: [W]=WARN [ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50 [ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 [ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046 [ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008 [ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0 [ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000 [ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514 [ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000 [ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000 [ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0 [ 6.097847] Call Trace: [ 6.097847] <TASK> [ 6.097847] ? eqbr_irq_mask+0x63/0x70 [ 6.097847] ? no_action+0x10/0x10 [ 6.097847] eqbr_irq_mask_ack+0x11/0x60 In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the interrupt is not disabled here. To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()' function. Implement instead this directly without disabling the interrupts. | |||||
| CVE-2026-23309 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add NULL pointer check to trigger_data_free() If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse() jumps to the out_free error path. While kfree() safely handles a NULL pointer, trigger_data_free() does not. This causes a NULL pointer dereference in trigger_data_free() when evaluating data->cmd_ops->set_filter. Fix the problem by adding a NULL pointer check to trigger_data_free(). The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. | |||||
| CVE-2026-23310 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded bond_option_mode_set() already rejects mode changes that would make a loaded XDP program incompatible via bond_xdp_check(). However, bond_option_xmit_hash_policy_set() has no such guard. For 802.3ad and balance-xor modes, bond_xdp_check() returns false when xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually absent due to hardware offload. This means a user can: 1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3). 2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded. This leaves bond->xdp_prog set but bond_xdp_check() now returning false for the same device. When the bond is later destroyed, dev_xdp_uninstall() calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering: WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)) Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an XDP program is loaded on a bond in 802.3ad or balance-xor mode. commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") introduced bond_xdp_check() which returns false for 802.3ad/balance-xor modes when xmit_hash_policy is vlan+srcmac. The check was wired into bond_xdp_set() to reject XDP attachment with an incompatible policy, but the symmetric path -- preventing xmit_hash_policy from being changed to an incompatible value after XDP is already loaded -- was left unguarded in bond_option_xmit_hash_policy_set(). Note: commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode") later added a similar guard to bond_option_mode_set(), but bond_option_xmit_hash_policy_set() remained unprotected. | |||||
| CVE-2026-9605 | 2026-05-28 | 7.5 HIGH | 7.3 HIGH | ||
| A flaw has been found in GNU libredwg up to 0.13.4.8160. This issue affects the function bit_read_RC of the file bits.c of the component Dwgbmp Utility. This manipulation causes heap-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: 8f03865f37f5d4ffd616fef802acc980be54d300. Applying a patch is the recommended action to fix this issue. | |||||