Total
33277 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21913 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range() Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results in the following warning: unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0) Call Trace: xen_read_msr+0x1e/0x30 amd_get_mmconfig_range+0x2b/0x80 quirk_amd_mmconfig_area+0x28/0x100 pnp_fixup_device+0x39/0x50 __pnp_add_device+0xf/0x150 pnp_add_device+0x3d/0x100 pnpacpi_add_device_handler+0x1f9/0x280 acpi_ns_get_device_callback+0x104/0x1c0 acpi_ns_walk_namespace+0x1d0/0x260 acpi_get_devices+0x8a/0xb0 pnpacpi_init+0x50/0x80 do_one_initcall+0x46/0x2e0 kernel_init_freeable+0x1da/0x2f0 kernel_init+0x16/0x1b0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the right course of action, so no change is needed there. This was most likely exposed by fixing the Xen MSR accessors to not be silently-safe. | |||||
| CVE-2025-21910 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> | |||||
| CVE-2025-21881 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: uprobes: Reject the shared zeropage in uprobe_write_opcode() We triggered the following crash in syzkaller tests: BUG: Bad page state in process syz.7.38 pfn:1eff3 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3 flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff) raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_unref_page_prepare+0x401/0x500 free_unref_page+0x6d/0x1b0 uprobe_write_opcode+0x460/0x8e0 install_breakpoint.part.0+0x51/0x80 register_for_each_vma+0x1d9/0x2b0 __uprobe_register+0x245/0x300 bpf_uprobe_multi_link_attach+0x29b/0x4f0 link_create+0x1e2/0x280 __sys_bpf+0x75f/0xac0 __x64_sys_bpf+0x1a/0x30 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1 The following syzkaller test case can be used to reproduce: r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8) write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10) r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0) mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0) r5 = userfaultfd(0x80801) ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20}) r6 = userfaultfd(0x80801) ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140)) ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2}) ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}}) r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94) bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40) The cause is that zero pfn is set to the PTE without increasing the RSS count in mfill_atomic_pte_zeropage() and the refcount of zero folio does not increase accordingly. Then, the operation on the same pfn is performed in uprobe_write_opcode()->__replace_page() to unconditional decrease the RSS count and old_folio's refcount. Therefore, two bugs are introduced: 1. The RSS count is incorrect, when process exit, the check_mm() report error "Bad rss-count". 2. The reserved folio (zero folio) is freed when folio->refcount is zero, then free_pages_prepare->free_page_is_bad() report error "Bad page state". There is more, the following warning could also theoretically be triggered: __replace_page() -> ... -> folio_remove_rmap_pte() -> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio) Considering that uprobe hit on the zero folio is a very rare case, just reject zero old folio immediately after get_user_page_vma_remote(). [ mingo: Cleaned up the changelog ] | |||||
| CVE-2025-21877 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> | |||||
| CVE-2025-21875 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: always handle address removal under msk socket lock Syzkaller reported a lockdep splat in the PM control path: WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Modules linked in: CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline] RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline] RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283 RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408 RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000 R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0 R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00 FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59 mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486 mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline] mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:733 ____sys_sendmsg+0x53a/0x860 net/socket.c:2573 ___sys_sendmsg net/socket.c:2627 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7e9998cde9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9 RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007 RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088 Indeed the PM can try to send a RM_ADDR over a msk without acquiring first the msk socket lock. The bugged code-path comes from an early optimization: when there are no subflows, the PM should (usually) not send RM_ADDR notifications. The above statement is incorrect, as without locks another process could concur ---truncated--- | |||||
| CVE-2025-21872 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? report_bug+0xff/0x140 ? early_fixup_exception+0x5d/0xb0 ? early_idt_handler_common+0x2f/0x3a ? __early_ioremap+0xef/0x220 ? efi_mokvar_table_init+0xce/0x1d0 ? setup_arch+0x864/0xc10 ? start_kernel+0x6b/0xa10 ? x86_64_start_reservations+0x24/0x30 ? x86_64_start_kernel+0xed/0xf0 ? common_startup_64+0x13e/0x141 </TASK> ---[ end trace 0000000000000000 ]--- mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187. Mapping the entire structure isn't actually necessary, as we don't ever need more than one entry header mapped at once. Changes efi_mokvar_table_init() to only map each entry header, not the entire table, when determining the table size. Since we're not mapping any data past the variable name, it also changes the code to enforce that each variable name is NUL terminated, rather than attempting to verify it in place. | |||||
| CVE-2025-21853 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: avoid holding freeze_mutex during mmap operation We use map->freeze_mutex to prevent races between map_freeze() and memory mapping BPF map contents with writable permissions. The way we naively do this means we'll hold freeze_mutex for entire duration of all the mm and VMA manipulations, which is completely unnecessary. This can potentially also lead to deadlocks, as reported by syzbot in [0]. So, instead, hold freeze_mutex only during writeability checks, bump (proactively) "write active" count for the map, unlock the mutex and proceed with mmap logic. And only if something went wrong during mmap logic, then undo that "write active" counter increment. [0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/ | |||||
| CVE-2025-21839 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410. ---truncated--- | |||||
| CVE-2025-21838 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up. | |||||
| CVE-2025-21766 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: use RCU protection in __ip_rt_update_pmtu() __ip_rt_update_pmtu() must use RCU protection to make sure the net structure it reads does not disappear. | |||||
| CVE-2025-21765 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. | |||||
| CVE-2025-21758 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: add RCU protection to mld_newpack() mld_newpack() can be called without RTNL or RCU being held. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. | |||||
| CVE-2025-21738 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer. | |||||
| CVE-2025-21728 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Send signals asynchronously if !preemptible BPF programs can execute in all kinds of contexts and when a program running in a non-preemptible context uses the bpf_send_signal() kfunc, it will cause issues because this kfunc can sleep. Change `irqs_disabled()` to `!preemptible()`. | |||||
| CVE-2025-21725 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix oops due to unset link speed It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always be set by the server, so the client must handle any values and then prevent oopses like below from happening: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48 89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8 e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89 c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24 RSP: 0018:ffffc90001817be0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99 RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228 RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200 R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58 FS: 00007fe27119e740(0000) GS:ffff888148600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0x159/0x1b0 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? do_error_trap+0x90/0x130 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? exc_divide_error+0x39/0x50 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? asm_exc_divide_error+0x1a/0x20 ? cifs_debug_data_proc_show+0xa39/0x1460 [cifs] ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? seq_read_iter+0x42e/0x790 seq_read_iter+0x19a/0x790 proc_reg_read_iter+0xbe/0x110 ? __pfx_proc_reg_read_iter+0x10/0x10 vfs_read+0x469/0x570 ? do_user_addr_fault+0x398/0x760 ? __pfx_vfs_read+0x10/0x10 ? find_held_lock+0x8a/0xa0 ? __pfx_lock_release+0x10/0x10 ksys_read+0xd3/0x170 ? __pfx_ksys_read+0x10/0x10 ? __rcu_read_unlock+0x50/0x270 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe271288911 Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911 RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003 RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000 </TASK> Fix this by setting cifs_server_iface::speed to a sane value (1Gbps) by default when link speed is unset. | |||||
| CVE-2025-21712 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct md_bitmap_stats"), following panic is reported: Oops: general protection fault, probably for non-canonical address RIP: 0010:bitmap_get_stats+0x2b/0xa0 Call Trace: <TASK> md_seq_show+0x2d2/0x5b0 seq_read_iter+0x2b9/0x470 seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6c/0xf0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Root cause is that bitmap_get_stats() can be called at anytime if mddev is still there, even if bitmap is destroyed, or not fully initialized. Deferenceing bitmap in this case can crash the kernel. Meanwhile, the above commit start to deferencing bitmap->storage, make the problem easier to trigger. Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. | |||||
| CVE-2025-21708 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: enable basic endpoint checking Syzkaller reports [1] encountering a common issue of utilizing a wrong usb endpoint type during URB submitting stage. This, in turn, triggers a warning shown below. For now, enable simple endpoint checking (specifically, bulk and interrupt eps, testing control one is not essential) to mitigate the issue with a view to do other related cosmetic changes later, if they are necessary. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv> Modules linked in: CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8> RSP: 0018:ffffc9000441f740 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9 RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001 RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733 __dev_open+0x2d4/0x4e0 net/core/dev.c:1474 __dev_change_flags+0x561/0x720 net/core/dev.c:8838 dev_change_flags+0x8f/0x160 net/core/dev.c:8910 devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177 inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x116/0x280 net/socket.c:1222 sock_ioctl+0x22e/0x6c0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc04ef73d49 ... This change has not been tested on real hardware. | |||||
| CVE-2025-21706 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only set fullmesh for subflow endp With the in-kernel path-manager, it is possible to change the 'fullmesh' flag. The code in mptcp_pm_nl_fullmesh() expects to change it only on 'subflow' endpoints, to recreate more or less subflows using the linked address. Unfortunately, the set_flags() hook was a bit more permissive, and allowed 'implicit' endpoints to get the 'fullmesh' flag while it is not allowed before. That's what syzbot found, triggering the following warning: WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 __mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] WARNING: CPU: 0 PID: 6499 at net/mptcp/pm_netlink.c:1496 mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Modules linked in: CPU: 0 UID: 0 PID: 6499 Comm: syz.1.413 Not tainted 6.13.0-rc5-syzkaller-00172-gd1bf27c4e176 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_netlink.c:1496 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_netlink.c:1980 [inline] RIP: 0010:mptcp_nl_set_flags net/mptcp/pm_netlink.c:2003 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x974/0xdc0 net/mptcp/pm_netlink.c:2064 Code: 01 00 00 49 89 c5 e8 fb 45 e8 f5 e9 b8 fc ff ff e8 f1 45 e8 f5 4c 89 f7 be 03 00 00 00 e8 44 1d 0b f9 eb a0 e8 dd 45 e8 f5 90 <0f> 0b 90 e9 17 ff ff ff 89 d9 80 e1 07 38 c1 0f 8c c9 fc ff ff 48 RSP: 0018:ffffc9000d307240 EFLAGS: 00010293 RAX: ffffffff8bb72e03 RBX: 0000000000000000 RCX: ffff88807da88000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000d307430 R08: ffffffff8bb72cf0 R09: 1ffff1100b842a5e R10: dffffc0000000000 R11: ffffed100b842a5f R12: ffff88801e2e5ac0 R13: ffff88805c214800 R14: ffff88805c2152e8 R15: 1ffff1100b842a5d FS: 00005555619f6500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002840 CR3: 00000000247e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2542 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5fe8785d29 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff571f5558 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5fe8975fa0 RCX: 00007f5fe8785d29 RDX: 0000000000000000 RSI: 0000000020000480 RDI: 0000000000000007 RBP: 00007f5fe8801b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5fe8975fa0 R14: 00007f5fe8975fa0 R15: 000000 ---truncated--- | |||||
| CVE-2025-21705 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: handle fastopen disconnect correctly Syzbot was able to trigger a data stream corruption: WARNING: CPU: 0 PID: 9846 at net/mptcp/protocol.c:1024 __mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Modules linked in: CPU: 0 UID: 0 PID: 9846 Comm: syz-executor351 Not tainted 6.13.0-rc2-syzkaller-00059-g00a5acdbf398 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__mptcp_clean_una+0xddb/0xff0 net/mptcp/protocol.c:1024 Code: fa ff ff 48 8b 4c 24 18 80 e1 07 fe c1 38 c1 0f 8c 8e fa ff ff 48 8b 7c 24 18 e8 e0 db 54 f6 e9 7f fa ff ff e8 e6 80 ee f5 90 <0f> 0b 90 4c 8b 6c 24 40 4d 89 f4 e9 04 f5 ff ff 44 89 f1 80 e1 07 RSP: 0018:ffffc9000c0cf400 EFLAGS: 00010293 RAX: ffffffff8bb0dd5a RBX: ffff888033f5d230 RCX: ffff888059ce8000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000c0cf518 R08: ffffffff8bb0d1dd R09: 1ffff110170c8928 R10: dffffc0000000000 R11: ffffed10170c8929 R12: 0000000000000000 R13: ffff888033f5d220 R14: dffffc0000000000 R15: ffff8880592b8000 FS: 00007f6e866496c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6e86f491a0 CR3: 00000000310e6000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __mptcp_clean_una_wakeup+0x7f/0x2d0 net/mptcp/protocol.c:1074 mptcp_release_cb+0x7cb/0xb30 net/mptcp/protocol.c:3493 release_sock+0x1aa/0x1f0 net/core/sock.c:3640 inet_wait_for_connect net/ipv4/af_inet.c:609 [inline] __inet_stream_connect+0x8bd/0xf30 net/ipv4/af_inet.c:703 mptcp_sendmsg_fastopen+0x2a2/0x530 net/mptcp/protocol.c:1755 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1830 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:726 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583 ___sys_sendmsg net/socket.c:2637 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6e86ebfe69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 1f 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6e86649168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6e86f491b8 RCX: 00007f6e86ebfe69 RDX: 0000000030004001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6e86f491b0 R08: 00007f6e866496c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6e86f491bc R13: 000000000000006e R14: 00007ffe445d9420 R15: 00007ffe445d9508 </TASK> The root cause is the bad handling of disconnect() generated internally by the MPTCP protocol in case of connect FASTOPEN errors. Address the issue increasing the socket disconnect counter even on such a case, to allow other threads waiting on the same socket lock to properly error out. | |||||
| CVE-2025-21702 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: pfifo_tail_enqueue: Drop new packet when sch->limit == 0 Expected behaviour: In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a packet in scheduler's queue and decrease scheduler's qlen by one. Then, pfifo_tail_enqueue() enqueue new packet and increase scheduler's qlen by one. Finally, pfifo_tail_enqueue() return `NET_XMIT_CN` status code. Weird behaviour: In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a scheduler that has no packet, the 'drop a packet' step will do nothing. This means the scheduler's qlen still has value equal 0. Then, we continue to enqueue new packet and increase scheduler's qlen by one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by one and return `NET_XMIT_CN` status code. The problem is: Let's say we have two qdiscs: Qdisc_A and Qdisc_B. - Qdisc_A's type must have '->graft()' function to create parent/child relationship. Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`. - Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`. - Qdisc_B is configured to have `sch->limit == 0`. - Qdisc_A is configured to route the enqueued's packet to Qdisc_B. Enqueue packet through Qdisc_A will lead to: - hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B) - Qdisc_B->q.qlen += 1 - pfifo_tail_enqueue() return `NET_XMIT_CN` - hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A. The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1. Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem. This violate the design where parent's qlen should equal to the sum of its childrens'qlen. Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable. | |||||