Total
33943 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38321 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smb: Log an error when close_all_cached_dirs fails Under low-memory conditions, close_all_cached_dirs() can't move the dentries to a separate list to dput() them once the locks are dropped. This will result in a "Dentry still in use" error, so add an error message that makes it clear this is what happened: [ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries [ 495.281595] ------------[ cut here ]------------ [ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs] [ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0 Also, bail out of looping through all tcons as soon as a single allocation fails, since we're already in trouble, and kmalloc() attempts for subseqeuent tcons are likely to fail just like the first one did. | |||||
| CVE-2025-38325 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: add free_transport ops in ksmbd connection free_transport function for tcp connection can be called from smbdirect. It will cause kernel oops. This patch add free_transport ops in ksmbd connection, and add each free_transports for tcp and smbdirect. | |||||
| CVE-2025-38327 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fgraph: Do not enable function_graph tracer when setting funcgraph-args When setting the funcgraph-args option when function graph tracer is net enabled, it incorrectly enables it. Worse, it unregisters itself when it was never registered. Then when it gets enabled again, it will register itself a second time causing a WARNing. ~# echo 1 > /sys/kernel/tracing/options/funcgraph-args ~# head -20 /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 813/26317372 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8); <idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) { <idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) { <idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1); <idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320); <idle>-0 [007] d..4. 358.966019: 7) 5.824 us | } <idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) { <idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) { Notice the "tracer: nop" at the top there. The current tracer is the "nop" tracer, but the content is obviously the function graph tracer. Enabling function graph tracing will cause it to register again and trigger a warning in the accounting: ~# echo function_graph > /sys/kernel/tracing/current_tracer -bash: echo: write error: Device or resource busy With the dmesg of: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000 Modules linked in: kvm_intel kvm irqbypass CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ftrace_startup_subops+0xc1e/0x1000 Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9 RSP: 0018:ffff888133cff948 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000 RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140 RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221 R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0 R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100 FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ftrace_startup_subops+0x10/0x10 ? find_held_lock+0x2b/0x80 ? ftrace_stub_direct_tramp+0x10/0x10 ? ftrace_stub_direct_tramp+0x10/0x10 ? trace_preempt_on+0xd0/0x110 ? __pfx_trace_graph_entry_args+0x10/ ---truncated--- | |||||
| CVE-2025-38333 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to bail out in get_new_segment() ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent status in between free_segmap and free_secmap, let's record such error into super block, and bail out get_new_segment() instead of continue using the segment. | |||||
| CVE-2025-38339 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: fix JIT code size calculation of bpf trampoline arch_bpf_trampoline_size() provides JIT size of the BPF trampoline before the buffer for JIT'ing it is allocated. The total number of instructions emitted for BPF trampoline JIT code depends on where the final image is located. So, the size arrived at with the dummy pass in arch_bpf_trampoline_size() can vary from the actual size needed in arch_prepare_bpf_trampoline(). When the instructions accounted in arch_bpf_trampoline_size() is less than the number of instructions emitted during the actual JIT compile of the trampoline, the below warning is produced: WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc which is: /* Make sure the trampoline generation logic doesn't overflow */ if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) { So, during the dummy pass, instead of providing some arbitrary image location, account for maximum possible instructions if and when there is a dependency with image location for JIT'ing. | |||||
| CVE-2025-38343 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: drop fragments with multicast or broadcast RA IEEE 802.11 fragmentation can only be applied to unicast frames. Therefore, drop fragments with multicast or broadcast RA. This patch addresses vulnerabilities such as CVE-2020-26145. | |||||
| CVE-2025-38351 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush In KVM guests with Hyper-V hypercalls enabled, the hypercalls HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST and HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX allow a guest to request invalidation of portions of a virtual TLB. For this, the hypercall parameter includes a list of GVAs that are supposed to be invalidated. However, when non-canonical GVAs are passed, there is currently no filtering in place and they are eventually passed to checked invocations of INVVPID on Intel / INVLPGA on AMD. While AMD's INVLPGA silently ignores non-canonical addresses (effectively a no-op), Intel's INVVPID explicitly signals VM-Fail and ultimately triggers the WARN_ONCE in invvpid_error(): invvpid failed: ext=0x0 vpid=1 gva=0xaaaaaaaaaaaaa000 WARNING: CPU: 6 PID: 326 at arch/x86/kvm/vmx/vmx.c:482 invvpid_error+0x91/0xa0 [kvm_intel] Modules linked in: kvm_intel kvm 9pnet_virtio irqbypass fuse CPU: 6 UID: 0 PID: 326 Comm: kvm-vm Not tainted 6.15.0 #14 PREEMPT(voluntary) RIP: 0010:invvpid_error+0x91/0xa0 [kvm_intel] Call Trace: vmx_flush_tlb_gva+0x320/0x490 [kvm_intel] kvm_hv_vcpu_flush_tlb+0x24f/0x4f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3013/0x5810 [kvm] Hyper-V documents that invalid GVAs (those that are beyond a partition's GVA space) are to be ignored. While not completely clear whether this ruling also applies to non-canonical GVAs, it is likely fine to make that assumption, and manual testing on Azure confirms "real" Hyper-V interprets the specification in the same way. Skip non-canonical GVAs when processing the list of address to avoid tripping the INVVPID failure. Alternatively, KVM could filter out "bad" GVAs before inserting into the FIFO, but practically speaking the only downside of pushing validation to the final processing is that doing so is suboptimal for the guest, and no well-behaved guest will request TLB flushes for non-canonical addresses. | |||||
| CVE-2025-38355 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Process deferred GGTT node removals on device unwind While we are indirectly draining our dedicated workqueue ggtt->wq that we use to complete asynchronous removal of some GGTT nodes, this happends as part of the managed-drm unwinding (ggtt_fini_early), which could be later then manage-device unwinding, where we could already unmap our MMIO/GMS mapping (mmio_fini). This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes) and this was leading to: [ ] BUG: unable to handle page fault for address: ffffc900058162a0 [ ] #PF: supervisor write access in kernel mode [ ] #PF: error_code(0x0002) - not-present page [ ] Oops: Oops: 0002 [#1] SMP NOPTI [ ] Tainted: [W]=WARN [ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe] [ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe] [ ] Call Trace: [ ] <TASK> [ ] xe_ggtt_clear+0xb0/0x270 [xe] [ ] ggtt_node_remove+0xbb/0x120 [xe] [ ] ggtt_node_remove_work_func+0x30/0x50 [xe] [ ] process_one_work+0x22b/0x6f0 [ ] worker_thread+0x1e8/0x3d Add managed-device action that will explicitly drain the workqueue with all pending node removals prior to releasing MMIO/GSM mapping. (cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391) | |||||
| CVE-2025-38356 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Explicitly exit CT safe mode on unwind During driver probe we might be briefly using CT safe mode, which is based on a delayed work, but usually we are able to stop this once we have IRQ fully operational. However, if we abort the probe quite early then during unwind we might try to destroy the workqueue while there is still a pending delayed work that attempts to restart itself which triggers a WARN. This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] ------------[ cut here ]------------ [ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq [ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710 [ ] RIP: 0010:__queue_work+0x287/0x710 [ ] Call Trace: [ ] delayed_work_timer_fn+0x19/0x30 [ ] call_timer_fn+0xa1/0x2a0 Exit the CT safe mode on unwind to avoid that warning. (cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec) | |||||
| CVE-2022-50085 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_resume There is a KASAN warning in raid_resume when running the lvm test lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks is greater than rs->raid_disks, so the loop touches one entry beyond the allocated length. | |||||
| CVE-2022-50086 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: don't allow the same type rq_qos add more than once In our test of iocost, we encountered some list add/del corruptions of inner_walk list in ioc_timer_fn. The reason can be described as follows: cpu 0 cpu 1 ioc_qos_write ioc_qos_write ioc = q_to_ioc(queue); if (!ioc) { ioc = kzalloc(); ioc = q_to_ioc(queue); if (!ioc) { ioc = kzalloc(); ... rq_qos_add(q, rqos); } ... rq_qos_add(q, rqos); ... } When the io.cost.qos file is written by two cpus concurrently, rq_qos may be added to one disk twice. In that case, there will be two iocs enabled and running on one disk. They own different iocgs on their active list. In the ioc_timer_fn function, because of the iocgs from two iocs have the same root iocg, the root iocg's walk_list may be overwritten by each other and this leads to list add/del corruptions in building or destroying the inner_walk list. And so far, the blk-rq-qos framework works in case that one instance for one type rq_qos per queue by default. This patch make this explicit and also fix the crash above. | |||||
| CVE-2022-50089 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: ensure pages are unlocked on cow_file_range() failure There is a hung_task report on zoned btrfs like below. https://github.com/naota/linux/issues/59 [726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds. [726.329839] Not tainted 5.16.0-rc1+ #1 [726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [726.331603] task:rocksdb:high0 state:D stack: 0 pid:11085 ppid: 11082 flags:0x00000000 [726.331608] Call Trace: [726.331611] <TASK> [726.331614] __schedule+0x2e5/0x9d0 [726.331622] schedule+0x58/0xd0 [726.331626] io_schedule+0x3f/0x70 [726.331629] __folio_lock+0x125/0x200 [726.331634] ? find_get_entries+0x1bc/0x240 [726.331638] ? filemap_invalidate_unlock_two+0x40/0x40 [726.331642] truncate_inode_pages_range+0x5b2/0x770 [726.331649] truncate_inode_pages_final+0x44/0x50 [726.331653] btrfs_evict_inode+0x67/0x480 [726.331658] evict+0xd0/0x180 [726.331661] iput+0x13f/0x200 [726.331664] do_unlinkat+0x1c0/0x2b0 [726.331668] __x64_sys_unlink+0x23/0x30 [726.331670] do_syscall_64+0x3b/0xc0 [726.331674] entry_SYSCALL_64_after_hwframe+0x44/0xae [726.331677] RIP: 0033:0x7fb9490a171b [726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057 [726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b [726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300 [726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000 [726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000 [726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260 [726.331693] </TASK> While we debug the issue, we found running fstests generic/551 on 5GB non-zoned null_blk device in the emulated zoned mode also had a similar hung issue. Also, we can reproduce the same symptom with an error injected cow_file_range() setup. The hang occurs when cow_file_range() fails in the middle of allocation. cow_file_range() called from do_allocation_zoned() can split the give region ([start, end]) for allocation depending on current block group usages. When btrfs can allocate bytes for one part of the split regions but fails for the other region (e.g. because of -ENOSPC), we return the error leaving the pages in the succeeded regions locked. Technically, this occurs only when @unlock == 0. Otherwise, we unlock the pages in an allocated region after creating an ordered extent. Considering the callers of cow_file_range(unlock=0) won't write out the pages, we can unlock the pages on error exit from cow_file_range(). So, we can ensure all the pages except @locked_page are unlocked on error case. In summary, cow_file_range now behaves like this: - page_started == 1 (return value) - All the pages are unlocked. IO is started. - unlock == 1 - All the pages except @locked_page are unlocked in any case - unlock == 0 - On success, all the pages are locked for writing out them - On failure, all the pages except @locked_page are unlocked | |||||
| CVE-2022-50090 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size On zoned filesystem, data write out is limited by max_zone_append_size, and a large ordered extent is split according the size of a bio. OTOH, the number of extents to be written is calculated using BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the metadata bytes to update and/or create the metadata items. The metadata reservation is done at e.g, btrfs_buffered_write() and then released according to the estimation changes. Thus, if the number of extent increases massively, the reserved metadata can run out. The increase of the number of extents easily occurs on zoned filesystem if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the following warning on a small RAM environment with disabling metadata over-commit (in the following patch). [75721.498492] ------------[ cut here ]------------ [75721.505624] BTRFS: block rsv 1 returned -28 [75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109 [75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 [75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] [75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286 [75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000 [75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e [75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7 [75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28 [75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a [75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000 [75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0 [75721.730499] Call Trace: [75721.735166] <TASK> [75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs] [75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs] [75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.769520] ? push_leaf_left+0x420/0x620 [btrfs] [75721.776431] ? memcpy+0x4e/0x60 [75721.781931] split_leaf+0x433/0x12d0 [btrfs] [75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs] [75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs] [75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs] [75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs] [75721.818300] ? lock_downgrade+0x7c0/0x7c0 [75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs] [75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs] [75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs] [75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs] [75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs] [75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs] [75721.869313] ? rcu_read_lock_sched_held+0x16/0x80 [75721.876085] ? lock_release+0x552/0xf80 [75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs] [75721.888886] ? __kasan_check_write+0x14/0x20 [75721.895152] ? do_raw_read_unlock+0x44/0x80 [75721.901323] ? _raw_write_lock_irq+0x60/0x80 [75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs] [75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs] [75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs] [75721.929166] ? _raw_write_unlock+0x23/0x40 [75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs] [75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs] [75721.949906] ? try_to_wake_up+0x30/0x14a0 [75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs] [75721.962661] ? rcu ---truncated--- | |||||
| CVE-2015-0311 | 5 Adobe, Apple, Linux and 2 more | 14 Flash Player, Mac Os X, Linux Kernel and 11 more | 2025-11-17 | 10.0 HIGH | 9.8 CRITICAL |
| Unspecified vulnerability in Adobe Flash Player through 13.0.0.262 and 14.x, 15.x, and 16.x through 16.0.0.287 on Windows and OS X and through 11.2.202.438 on Linux allows remote attackers to execute arbitrary code via unknown vectors, as exploited in the wild in January 2015. | |||||
| CVE-2016-4171 | 8 Adobe, Apple, Google and 5 more | 14 Flash Player, Mac Os X, Macos and 11 more | 2025-11-17 | 10.0 HIGH | 9.8 CRITICAL |
| Unspecified vulnerability in Adobe Flash Player 21.0.0.242 and earlier allows remote attackers to execute arbitrary code via unknown vectors, as exploited in the wild in June 2016. | |||||
| CVE-2016-4117 | 4 Adobe, Opensuse, Redhat and 1 more | 9 Flash Player, Evergreen, Opensuse and 6 more | 2025-11-17 | 10.0 HIGH | 9.8 CRITICAL |
| Adobe Flash Player 21.0.0.226 and earlier allows remote attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in May 2016. | |||||
| CVE-2016-1019 | 5 Adobe, Apple, Google and 2 more | 13 Air Desktop Runtime, Air Sdk, Air Sdk \& Compiler and 10 more | 2025-11-17 | 10.0 HIGH | 9.8 CRITICAL |
| Adobe Flash Player 21.0.0.197 and earlier allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via unspecified vectors, as exploited in the wild in April 2016. | |||||
| CVE-2015-0310 | 4 Adobe, Apple, Linux and 1 more | 4 Flash Player, Mac Os X, Linux Kernel and 1 more | 2025-11-17 | 10.0 HIGH | 7.8 HIGH |
| Adobe Flash Player before 13.0.0.262 and 14.x through 16.x before 16.0.0.287 on Windows and OS X and before 11.2.202.438 on Linux does not properly restrict discovery of memory addresses, which allows attackers to bypass the ASLR protection mechanism on Windows, and have an unspecified impact on other platforms, via unknown vectors, as exploited in the wild in January 2015. | |||||
| CVE-2025-64705 | 1 Frappe | 1 Learning | 2025-11-17 | N/A | 4.3 MEDIUM |
| Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, users were able to access the submissions made by other students The issue has been fixed in version 2.41.0 by ensuring proper roles and redirecting if accessed via direct URL. | |||||
| CVE-2022-50070 | 1 Linux | 1 Linux Kernel | 2025-11-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: do not queue data on closed subflows Dipanjan reported a syzbot splat at close time: WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153 inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Modules linked in: uio_ivshmem(OE) uio(E) CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE 5.19.0-rc6-g2eae0556bb9d #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91 f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00 RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002 RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000 R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400 R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258 FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0 Call Trace: <TASK> __sk_destruct+0x4f/0x8e0 net/core/sock.c:2067 sk_destruct+0xbd/0xe0 net/core/sock.c:2112 __sk_free+0xef/0x3d0 net/core/sock.c:2123 sk_free+0x78/0xa0 net/core/sock.c:2134 sock_put include/net/sock.h:1927 [inline] __mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351 __mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828 mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586 process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289 worker_thread+0x623/0x1070 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> The root cause of the problem is that an mptcp-level (re)transmit can race with mptcp_close() and the packet scheduler checks the subflow state before acquiring the socket lock: we can try to (re)transmit on an already closed ssk. Fix the issue checking again the subflow socket status under the subflow socket lock protection. Additionally add the missing check for the fallback-to-tcp case. | |||||