Total
35896 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-49971 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Increase array size of dummy_boolean [WHY] dml2_core_shared_mode_support and dml_core_mode_support access the third element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when dummy_boolean has size of 2. Any assignment to hw_debug5 causes an OVERRUN. [HOW] Increase dummy_boolean's array size to 3. This fixes 2 OVERRUN issues reported by Coverity. | |||||
| CVE-2024-49963 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: bcm2835: Fix timeout during suspend mode During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs | |||||
| CVE-2024-49961 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ar0521: Use cansleep version of gpiod_set_value() If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... | |||||
| CVE-2024-49959 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: <TASK> add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code. | |||||
| CVE-2024-49958 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reserve space for inline xattr before attaching reflink tree One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. | |||||
| CVE-2024-49954 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: static_call: Replace pointless WARN_ON() in static_call_module_notify() static_call_module_notify() triggers a WARN_ON(), when memory allocation fails in __static_call_add_module(). That's not really justified, because the failure case must be correctly handled by the well known call chain and the error code is passed through to the initiating userspace application. A memory allocation fail is not a fatal problem, but the WARN_ON() takes the machine out when panic_on_warn is set. Replace it with a pr_warn(). | |||||
| CVE-2024-49952 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: prevent nf_skb_duplicated corruption syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 </TASK> | |||||
| CVE-2024-49951 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible crash on mgmt_index_removed If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. | |||||
| CVE-2024-49948 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: add more sanity checks to qdisc_pkt_len_init() One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. | |||||
| CVE-2024-49947 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: test for not too small csum_start in virtio_net_hdr_to_skb() syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne ---truncated--- | |||||
| CVE-2024-49946 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ppp: do not assume bh is held in ppp_channel_bridge_input() Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_sta ---truncated--- | |||||
| CVE-2024-49944 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] | |||||
| CVE-2024-49940 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: prevent possible tunnel refcount underflow When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. | |||||
| CVE-2024-49939 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to add interface to list twice when SER If SER L2 occurs during the WoWLAN resume flow, the add interface flow is triggered by ieee80211_reconfig(). However, due to rtw89_wow_resume() return failure, it will cause the add interface flow to be executed again, resulting in a double add list and causing a kernel panic. Therefore, we have added a check to prevent double adding of the list. list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:37! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:__list_add_valid_or_report+0x5e/0xb0 Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12 RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900 RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0 R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060 R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010 FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? __list_add_valid_or_report+0x5e/0xb0 ? do_error_trap+0x6d/0x90 ? __list_add_valid_or_report+0x5e/0xb0 ? handle_invalid_op+0x30/0x40 ? __list_add_valid_or_report+0x5e/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x5e/0xb0 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f] drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ? finish_wait+0x3e/0x90 ? synchronize_rcu_expedited+0x174/0x260 ? sync_rcu_exp_done_unlocked+0x50/0x50 ? wake_bit_function+0x40/0x40 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] process_scheduled_works+0x1e5/0x480 worker_thread+0xea/0x1e0 kthread+0xdb/0x110 ? move_linked_works+0x90/0x90 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x3b/0x50 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev gsmi: Log Shutdown Reason 0x03 ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2024-49937 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] | |||||
| CVE-2024-49935 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: PAD: fix crash in exit_round_robin() The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address. ---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618 crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits> crash> px tsk_in_cpu[14] $66 = 0xffffffff crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620 crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad] crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ---------- To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu(). [ rjw: Subject edit, avoid updates to the same value ] | |||||
| CVE-2024-49934 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.6 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name It's observed that a crash occurs during hot-remove a memory device, in which user is accessing the hugetlb. See calltrace as following: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790 Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:do_user_addr_fault+0x2a0/0x790 Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41 RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046 RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658 R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000 FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x8d/0x190 ? do_user_addr_fault+0x2a0/0x790 ? report_bug+0x1c3/0x1d0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? do_user_addr_fault+0x2a0/0x790 ? exc_page_fault+0x31/0x200 exc_page_fault+0x68/0x200 <...snip...> BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dentry_name+0x1f4/0x440 <...snip...> ? dentry_name+0x2fa/0x440 vsnprintf+0x1f3/0x4f0 vprintk_store+0x23a/0x540 vprintk_emit+0x6d/0x330 _printk+0x58/0x80 dump_mapping+0x10b/0x1a0 ? __pfx_free_object_rcu+0x10/0x10 __dump_page+0x26b/0x3e0 ? vprintk_emit+0xe0/0x330 ? _printk+0x58/0x80 ? dump_page+0x17/0x50 dump_page+0x17/0x50 do_migrate_range+0x2f7/0x7f0 ? do_migrate_range+0x42/0x7f0 ? offline_pages+0x2f4/0x8c0 offline_pages+0x60a/0x8c0 memory_subsys_offline+0x9f/0x1c0 ? lockdep_hardirqs_on+0x77/0x100 ? _raw_spin_unlock_irqrestore+0x38/0x60 device_offline+0xe3/0x110 state_store+0x6e/0xc0 kernfs_fop_write_iter+0x143/0x200 vfs_write+0x39f/0x560 ksys_write+0x65/0xf0 do_syscall_64+0x62/0x130 Previously, some sanity check have been done in dump_mapping() before the print facility parsing '%pd' though, it's still possible to run into an invalid dentry.d_name.name. Since dump_mapping() only needs to dump the filename only, retrieve it by itself in a safer way to prevent an unnecessary crash. Note that either retrieving the filename with '%pd' or strncpy_from_kernel_nofault(), the filename could be unreliable. | |||||
| CVE-2024-49933 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. | |||||
| CVE-2024-49927 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. | |||||
| CVE-2024-49926 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb() For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is defined as NR_CPUS instead of the number of possible cpus, this will cause the following system panic: smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... BUG: unable to handle page fault for address: ffffffff9911c8c8 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x23/0x80 ? page_fault_oops+0xa4/0x180 ? exc_page_fault+0x152/0x180 ? asm_exc_page_fault+0x26/0x40 ? rcu_tasks_need_gpcb+0x25d/0x2c0 ? __pfx_rcu_tasks_kthread+0x40/0x40 rcu_tasks_one_gp+0x69/0x180 rcu_tasks_kthread+0x94/0xc0 kthread+0xe8/0x140 ? __pfx_kthread+0x40/0x40 ret_from_fork+0x34/0x80 ? __pfx_kthread+0x40/0x40 ret_from_fork_asm+0x1b/0x80 </TASK> Considering that there may be holes in the CPU numbers, use the maximum possible cpu number, instead of nr_cpu_ids, for configuring enqueue and dequeue limits. [ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] | |||||