Total
35983 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39926 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: genetlink: fix genl_bind() invoking bind() after -EPERM Per family bind/unbind callbacks were introduced to allow families to track multicast group consumer presence, e.g. to start or stop producing events depending on listeners. However, in genl_bind() the bind() callback was invoked even if capability checks failed and ret was set to -EPERM. This means that callbacks could run on behalf of unauthorized callers while the syscall still returned failure to user space. Fix this by only invoking bind() after "if (ret) break;" check i.e. after permission checks have succeeded. | |||||
| CVE-2025-39925 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: implement NETDEV_UNREGISTER notification handler syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. [mkl: remove space in front of label] | |||||
| CVE-2025-39923 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/ | |||||
| CVE-2025-39921 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback In commit 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem operation frequency switches") the logic for checking the viability of op->max_freq in mchp_coreqspi_setup_clock() was copied into mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid when this function is called during probe but is instead zero. Accordingly, baud_rate_val is calculated to be INT_MAX due to division by zero, causing probe of the attached memory device to fail. Seemingly spi-microchip-core-qspi was the only driver that had such a modification made to its supports_op callback when the per_op_freq capability was added, so just remove it to restore prior functionality. | |||||
| CVE-2025-39913 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork. syzbot reported the splat below. [0] The repro does the following: 1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes) 2. Attach the prog to a SOCKMAP 3. Add a socket to the SOCKMAP 4. Activate fault injection 5. Send data less than cork_bytes At 5., the data is carried over to the next sendmsg() as it is smaller than the cork_bytes specified by bpf_msg_cork_bytes(). Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold the data, but this fails silently due to fault injection + __GFP_NOWARN. If the allocation fails, we need to revert the sk->sk_forward_alloc change done by sk_msg_alloc(). Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate psock->cork. The "*copied" also needs to be updated such that a proper error can be returned to the caller, sendmsg. It fails to allocate psock->cork. Nothing has been corked so far, so this patch simply sets "*copied" to 0. [0]: WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983 Modules linked in: CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156 Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246 RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80 RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000 RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4 R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380 R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872 FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0 Call Trace: <IRQ> __sk_destruct+0x86/0x660 net/core/sock.c:2339 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861 handle_softirqs+0x286/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052 </IRQ> | |||||
| CVE-2025-39912 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfs/localio: restore creds before releasing pageio data Otherwise if the nfsd filecache code releases the nfsd_file immediately, it can trigger the BUG_ON(cred == current->cred) in __put_cred() when it puts the nfsd_file->nf_file->f-cred. | |||||
| CVE-2025-39911 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: <TASK> free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally. | |||||
| CVE-2025-39907 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer Avoid below overlapping mappings by using a contiguous non-cacheable buffer. [ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST, overlapping mappings aren't supported [ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300 [ 4.097071] Modules linked in: [ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1 [ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT) [ 4.118824] Workqueue: events_unbound deferred_probe_work_func [ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.131624] pc : add_dma_entry+0x23c/0x300 [ 4.135658] lr : add_dma_entry+0x23c/0x300 [ 4.139792] sp : ffff800009dbb490 [ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000 [ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8 [ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20 [ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006 [ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e [ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec [ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58 [ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000 [ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40 [ 4.214185] Call trace: [ 4.216605] add_dma_entry+0x23c/0x300 [ 4.220338] debug_dma_map_sg+0x198/0x350 [ 4.224373] __dma_map_sg_attrs+0xa0/0x110 [ 4.228411] dma_map_sg_attrs+0x10/0x2c [ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc [ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174 [ 4.242127] nand_read_oob+0x1d4/0x8e0 [ 4.245861] mtd_read_oob_std+0x58/0x84 [ 4.249596] mtd_read_oob+0x90/0x150 [ 4.253231] mtd_read+0x68/0xac | |||||
| CVE-2025-39900 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: gen_estimator: fix est_timer() vs CONFIG_PREEMPT_RT=y syzbot reported a WARNING in est_timer() [1] Problem here is that with CONFIG_PREEMPT_RT=y, timer callbacks can be preempted. Adopt preempt_disable_nested()/preempt_enable_nested() to fix this. [1] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 __seqprop_assert include/linux/seqlock.h:221 [inline] WARNING: CPU: 0 PID: 16 at ./include/linux/seqlock.h:221 est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93 Modules linked in: CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:__seqprop_assert include/linux/seqlock.h:221 [inline] RIP: 0010:est_timer+0x6dc/0x9f0 net/core/gen_estimator.c:93 Call Trace: <TASK> call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22c/0x710 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1043 smpboot_thread_fn+0x53f/0xa60 kernel/smpboot.c:160 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | |||||
| CVE-2025-39899 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/userfaultfd: fix kmap_local LIFO ordering for CONFIG_HIGHPTE With CONFIG_HIGHPTE on 32-bit ARM, move_pages_pte() maps PTE pages using kmap_local_page(), which requires unmapping in Last-In-First-Out order. The current code maps dst_pte first, then src_pte, but unmaps them in the same order (dst_pte, src_pte), violating the LIFO requirement. This causes the warning in kunmap_local_indexed(): WARNING: CPU: 0 PID: 604 at mm/highmem.c:622 kunmap_local_indexed+0x178/0x17c addr \!= __fix_to_virt(FIX_KMAP_BEGIN + idx) Fix this by reversing the unmap order to respect LIFO ordering. This issue follows the same pattern as similar fixes: - commit eca6828403b8 ("crypto: skcipher - fix mismatch between mapping and unmapping order") - commit 8cf57c6df818 ("nilfs2: eliminate staggered calls to kunmap in nilfs_rename") Both of which addressed the same fundamental requirement that kmap_local operations must follow LIFO ordering. | |||||
| CVE-2025-39886 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/ | |||||
| CVE-2025-39874 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: macsec: sync features on RTM_NEWLINK Syzkaller managed to lock the lower device via ETHTOOL_SFEATURES: netdev_lock include/linux/netdevice.h:2761 [inline] netdev_lock_ops include/net/netdev_lock.h:42 [inline] netdev_sync_lower_features net/core/dev.c:10649 [inline] __netdev_update_features+0xcb1/0x1be0 net/core/dev.c:10819 netdev_update_features+0x6d/0xe0 net/core/dev.c:10876 macsec_notify+0x2f5/0x660 drivers/net/macsec.c:4533 notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2267 [inline] call_netdevice_notifiers net/core/dev.c:2281 [inline] netdev_features_change+0x85/0xc0 net/core/dev.c:1570 __dev_ethtool net/ethtool/ioctl.c:3469 [inline] dev_ethtool+0x1536/0x19b0 net/ethtool/ioctl.c:3502 dev_ioctl+0x392/0x1150 net/core/dev_ioctl.c:759 It happens because lower features are out of sync with the upper: __dev_ethtool (real_dev) netdev_lock_ops(real_dev) ETHTOOL_SFEATURES __netdev_features_change netdev_sync_upper_features disable LRO on the lower if (old_features != dev->features) netdev_features_change fires NETDEV_FEAT_CHANGE macsec_notify NETDEV_FEAT_CHANGE netdev_update_features (for each macsec dev) netdev_sync_lower_features if (upper_features != lower_features) netdev_lock_ops(lower) # lower == real_dev stuck ... netdev_unlock_ops(real_dev) Per commit af5f54b0ef9e ("net: Lock lower level devices when updating features"), we elide the lock/unlock when the upper and lower features are synced. Makes sure the lower (real_dev) has proper features after the macsec link has been created. This makes sure we never hit the situation where we need to sync upper flags to the lower. | |||||
| CVE-2025-39868 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix runtime warning on truncate_folio_batch_exceptionals() Commit 0e2f80afcfa6("fs/dax: ensure all pages are idle prior to filesystem unmount") introduced the WARN_ON_ONCE to capture whether the filesystem has removed all DAX entries or not and applied the fix to xfs and ext4. Apply the missed fix on erofs to fix the runtime warning: [ 5.266254] ------------[ cut here ]------------ [ 5.266274] WARNING: CPU: 6 PID: 3109 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xff/0x260 [ 5.266294] Modules linked in: [ 5.266999] CPU: 6 UID: 0 PID: 3109 Comm: umount Tainted: G S 6.16.0+ #6 PREEMPT(voluntary) [ 5.267012] Tainted: [S]=CPU_OUT_OF_SPEC [ 5.267017] Hardware name: Dell Inc. OptiPlex 5000/05WXFV, BIOS 1.5.1 08/24/2022 [ 5.267024] RIP: 0010:truncate_folio_batch_exceptionals+0xff/0x260 [ 5.267076] Code: 00 00 41 39 df 7f 11 eb 78 83 c3 01 49 83 c4 08 41 39 df 74 6c 48 63 f3 48 83 fe 1f 0f 83 3c 01 00 00 43 f6 44 26 08 01 74 df <0f> 0b 4a 8b 34 22 4c 89 ef 48 89 55 90 e8 ff 54 1f 00 48 8b 55 90 [ 5.267083] RSP: 0018:ffffc900013f36c8 EFLAGS: 00010202 [ 5.267095] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 5.267101] RDX: ffffc900013f3790 RSI: 0000000000000000 RDI: ffff8882a1407898 [ 5.267108] RBP: ffffc900013f3740 R08: 0000000000000000 R09: 0000000000000000 [ 5.267113] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 5.267119] R13: ffff8882a1407ab8 R14: ffffc900013f3888 R15: 0000000000000001 [ 5.267125] FS: 00007aaa8b437800(0000) GS:ffff88850025b000(0000) knlGS:0000000000000000 [ 5.267132] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.267138] CR2: 00007aaa8b3aac10 CR3: 000000024f764000 CR4: 0000000000f52ef0 [ 5.267144] PKRU: 55555554 [ 5.267150] Call Trace: [ 5.267154] <TASK> [ 5.267181] truncate_inode_pages_range+0x118/0x5e0 [ 5.267193] ? save_trace+0x54/0x390 [ 5.267296] truncate_inode_pages_final+0x43/0x60 [ 5.267309] evict+0x2a4/0x2c0 [ 5.267339] dispose_list+0x39/0x80 [ 5.267352] evict_inodes+0x150/0x1b0 [ 5.267376] generic_shutdown_super+0x41/0x180 [ 5.267390] kill_block_super+0x1b/0x50 [ 5.267402] erofs_kill_sb+0x81/0x90 [erofs] [ 5.267436] deactivate_locked_super+0x32/0xb0 [ 5.267450] deactivate_super+0x46/0x60 [ 5.267460] cleanup_mnt+0xc3/0x170 [ 5.267475] __cleanup_mnt+0x12/0x20 [ 5.267485] task_work_run+0x5d/0xb0 [ 5.267499] exit_to_user_mode_loop+0x144/0x170 [ 5.267512] do_syscall_64+0x2b9/0x7c0 [ 5.267523] ? __lock_acquire+0x665/0x2ce0 [ 5.267535] ? __lock_acquire+0x665/0x2ce0 [ 5.267560] ? lock_acquire+0xcd/0x300 [ 5.267573] ? find_held_lock+0x31/0x90 [ 5.267582] ? mntput_no_expire+0x97/0x4e0 [ 5.267606] ? mntput_no_expire+0xa1/0x4e0 [ 5.267625] ? mntput+0x24/0x50 [ 5.267634] ? path_put+0x1e/0x30 [ 5.267647] ? do_faccessat+0x120/0x2f0 [ 5.267677] ? do_syscall_64+0x1a2/0x7c0 [ 5.267686] ? from_kgid_munged+0x17/0x30 [ 5.267703] ? from_kuid_munged+0x13/0x30 [ 5.267711] ? __do_sys_getuid+0x3d/0x50 [ 5.267724] ? do_syscall_64+0x1a2/0x7c0 [ 5.267732] ? irqentry_exit+0x77/0xb0 [ 5.267743] ? clear_bhb_loop+0x30/0x80 [ 5.267752] ? clear_bhb_loop+0x30/0x80 [ 5.267765] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 5.267772] RIP: 0033:0x7aaa8b32a9fb [ 5.267781] Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 e9 83 0d 00 f7 d8 [ 5.267787] RSP: 002b:00007ffd7c4c9468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 5.267796] RAX: 0000000000000000 RBX: 00005a61592a8b00 RCX: 00007aaa8b32a9fb [ 5.267802] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005a61592b2080 [ 5.267806] RBP: 00007ffd7c4c9540 R08: 00007aaa8b403b20 R09: 0000000000000020 [ 5.267812] R10: 0000000000000001 R11: 0000000000000246 R12: 00005a61592a8c00 [ 5.267817] R13: 00000000 ---truncated--- | |||||
| CVE-2025-39844 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: move page table sync declarations to linux/pgtable.h During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by ---truncated--- | |||||
| CVE-2025-39842 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: prevent release journal inode after journal shutdown Before calling ocfs2_delete_osb(), ocfs2_journal_shutdown() has already been executed in ocfs2_dismount_volume(), so osb->journal must be NULL. Therefore, the following calltrace will inevitably fail when it reaches jbd2_journal_release_jbd_inode(). ocfs2_dismount_volume()-> ocfs2_delete_osb()-> ocfs2_free_slot_info()-> __ocfs2_free_slot_info()-> evict()-> ocfs2_evict_inode()-> ocfs2_clear_inode()-> jbd2_journal_release_jbd_inode(osb->journal->j_journal, Adding osb->journal checks will prevent null-ptr-deref during the above execution path. | |||||
| CVE-2025-39835 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.) | |||||
| CVE-2025-39831 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbnic: Move phylink resume out of service_task and into open/close The fbnic driver was presenting with the following locking assert coming out of a PM resume: [ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611) [ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0 [ 42.208872][ T164] Modules linked in: [ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full) [ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0 [ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef [ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296 [ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000 [ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001 [ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84 [ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000 [ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0 [ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000 [ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0 [ 42.213227][ T164] PKRU: 55555554 [ 42.213366][ T164] Call Trace: [ 42.213483][ T164] <TASK> [ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0 [ 42.213725][ T164] pci_reset_function+0x116/0x1d0 [ 42.213895][ T164] reset_store+0xa0/0x100 [ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50 [ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0 [ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160 [ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0 [ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0 [ 42.214836][ T164] new_sync_write+0x308/0x6f0 [ 42.214987][ T164] ? __lock_acquire+0x34c/0x740 [ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0 [ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260 [ 42.215440][ T164] ? ksys_write+0xff/0x200 [ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0 [ 42.215742][ T164] vfs_write+0x65e/0xbb0 [ 42.215876][ T164] ksys_write+0xff/0x200 [ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0 [ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0 [ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0 [ 42.216442][ T164] do_syscall_64+0xbb/0x360 [ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986 A bit of digging showed that we were invoking the phylink_resume as a part of the fbnic_up path when we were enabling the service task while not holding the RTNL lock. We should be enabling this sooner as a part of the ndo_open path and then just letting the service task come online later. This will help to enforce the correct locking and brings the phylink interface online at the same time as the network interface, instead of at a later time. I tested this on QEMU to verify this was working by putting the system to sleep using "echo mem > /sys/power/state" to put the system to sleep in the guest and then using the command "system_wakeup" in the QEMU monitor. | |||||
| CVE-2025-39829 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: trace/fgraph: Fix the warning caused by missing unregister notifier This warning was triggered during testing on v6.16: notifier callback ftrace_suspend_notifier_call already registered WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0 ... Call Trace: <TASK> blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f When writing to the function_profile_enabled interface, the notifier was not unregistered after start_graph_tracing failed, causing a warning the next time function_profile_enabled was written. Fixed by adding unregister_pm_notifier in the exception path. | |||||
| CVE-2025-39828 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: | |||||
| CVE-2025-39822 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned. | |||||