Total
13144 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-20418 | 2 Google, Mediatek | 3 Matter, Mt7931, Mt7933 | 2026-02-03 | N/A | 9.8 CRITICAL |
| In Thread, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00465153; Issue ID: MSV-4927. | |||||
| CVE-2023-53676 | 1 Linux | 1 Linux Kernel | 2026-02-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show() The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. | |||||
| CVE-2023-53680 | 1 Linux | 1 Linux Kernel | 2026-02-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL OPDESC() simply indexes into nfsd4_ops[] by the op's operation number, without range checking that value. It assumes callers are careful to avoid calling it with an out-of-bounds opnum value. nfsd4_decode_compound() is not so careful, and can invoke OPDESC() with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end of nfsd4_ops[]. | |||||
| CVE-2026-1788 | 2026-02-03 | N/A | N/A | ||
| : Out-of-bounds Write vulnerability in Xquic Project Xquic Server xquic on Linux (QUIC protocol implementation, packet processing module modules) allows : Buffer Manipulation.This issue affects Xquic Server: through 1.8.3. | |||||
| CVE-2025-71004 | 1 Oneflow | 1 Oneflow | 2026-02-03 | N/A | 6.5 MEDIUM |
| A segmentation violation in the oneflow.logical_or component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. | |||||
| CVE-2025-39962 | 1 Linux | 1 Linux Kernel | 2026-02-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements. | |||||
| CVE-2026-1284 | 2026-02-03 | N/A | 7.8 HIGH | ||
| An Out-Of-Bounds Write vulnerability affecting the EPRT file reading procedure in SOLIDWORKS eDrawings from Release SOLIDWORKS Desktop 2025 through Release SOLIDWORKS Desktop 2026 could allow an attacker to execute arbitrary code while opening a specially crafted EPRT file. | |||||
| CVE-2025-13151 | 1 Gnu | 1 Libtasn1 | 2026-02-02 | N/A | 7.5 HIGH |
| Stack-based buffer overflow in libtasn1 version: v4.20.0. The function fails to validate the size of input data resulting in a buffer overflow in asn1_expend_octet_string. | |||||
| CVE-2026-21869 | 1 Ggml | 1 Llama.cpp | 2026-02-02 | N/A | 8.8 HIGH |
| llama.cpp is an inference of several LLM models in C/C++. In commits 55d4206c8 and prior, the n_discard parameter is parsed directly from JSON input in the llama.cpp server's completion endpoints without validation to ensure it's non-negative. When a negative value is supplied and the context fills up, llama_memory_seq_rm/add receives a reversed range and negative offset, causing out-of-bounds memory writes in the token evaluation loop. This deterministic memory corruption can crash the process or enable remote code execution (RCE). There is no fix at the time of publication. | |||||
| CVE-2025-11187 | 1 Openssl | 1 Openssl | 2026-02-02 | N/A | 6.1 MEDIUM |
| Issue summary: PBMAC1 parameters in PKCS#12 files are missing validation which can trigger a stack-based buffer overflow, invalid pointer or NULL pointer dereference during MAC verification. Impact summary: The stack buffer overflow or NULL pointer dereference may cause a crash leading to Denial of Service for an application that parses untrusted PKCS#12 files. The buffer overflow may also potentially enable code execution depending on platform mitigations. When verifying a PKCS#12 file that uses PBMAC1 for the MAC, the PBKDF2 salt and keylength parameters from the file are used without validation. If the value of keylength exceeds the size of the fixed stack buffer used for the derived key (64 bytes), the key derivation will overflow the buffer. The overflow length is attacker-controlled. Also, if the salt parameter is not an OCTET STRING type this can lead to invalid or NULL pointer dereference. Exploiting this issue requires a user or application to process a maliciously crafted PKCS#12 file. It is uncommon to accept untrusted PKCS#12 files in applications as they are usually used to store private keys which are trusted by definition. For this reason the issue was assessed as Moderate severity. The FIPS modules in 3.6, 3.5 and 3.4 are not affected by this issue, as PKCS#12 processing is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5 and 3.4 are vulnerable to this issue. OpenSSL 3.3, 3.0, 1.1.1 and 1.0.2 are not affected by this issue as they do not support PBMAC1 in PKCS#12. | |||||
| CVE-2025-15467 | 1 Openssl | 1 Openssl | 2026-02-02 | N/A | 9.8 CRITICAL |
| Issue summary: Parsing CMS AuthEnvelopedData message with maliciously crafted AEAD parameters can trigger a stack buffer overflow. Impact summary: A stack buffer overflow may lead to a crash, causing Denial of Service, or potentially remote code execution. When parsing CMS AuthEnvelopedData structures that use AEAD ciphers such as AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is copied into a fixed-size stack buffer without verifying that its length fits the destination. An attacker can supply a crafted CMS message with an oversized IV, causing a stack-based out-of-bounds write before any authentication or tag verification occurs. Applications and services that parse untrusted CMS or PKCS#7 content using AEAD ciphers (e.g., S/MIME AuthEnvelopedData with AES-GCM) are vulnerable. Because the overflow occurs prior to authentication, no valid key material is required to trigger it. While exploitability to remote code execution depends on platform and toolchain mitigations, the stack-based write primitive represents a severe risk. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue. OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. | |||||
| CVE-2025-68160 | 1 Openssl | 1 Openssl | 2026-02-02 | N/A | 4.7 MEDIUM |
| Issue summary: Writing large, newline-free data into a BIO chain using the line-buffering filter where the next BIO performs short writes can trigger a heap-based out-of-bounds write. Impact summary: This out-of-bounds write can cause memory corruption which typically results in a crash, leading to Denial of Service for an application. The line-buffering BIO filter (BIO_f_linebuffer) is not used by default in TLS/SSL data paths. In OpenSSL command-line applications, it is typically only pushed onto stdout/stderr on VMS systems. Third-party applications that explicitly use this filter with a BIO chain that can short-write and that write large, newline-free data influenced by an attacker would be affected. However, the circumstances where this could happen are unlikely to be under attacker control, and BIO_f_linebuffer is unlikely to be handling non-curated data controlled by an attacker. For that reason the issue was assessed as Low severity. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the BIO implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. | |||||
| CVE-2025-69419 | 1 Openssl | 1 Openssl | 2026-02-02 | N/A | 7.4 HIGH |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer. Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service. The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer. The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue. | |||||
| CVE-2025-21439 | 1 Qualcomm | 50 Fastconnect 6700, Fastconnect 6700 Firmware, Fastconnect 6900 and 47 more | 2026-01-30 | N/A | 7.8 HIGH |
| Memory corruption may occur while reading board data via IOCTL call when the WLAN driver copies the content to the provided output buffer. | |||||
| CVE-2023-54334 | 1 Explorerplusplus | 1 Explorer\+\+ | 2026-01-30 | N/A | 9.8 CRITICAL |
| Explorer32++ 1.3.5.531 contains a buffer overflow vulnerability in Structured Exception Handler (SEH) records that allows attackers to execute arbitrary code. Attackers can exploit the vulnerability by providing a long file name argument over 396 characters to corrupt the SEH chain and potentially execute malicious code. | |||||
| CVE-2023-54330 | 1 Inbit | 1 Inbit Messenger | 2026-01-30 | N/A | 9.8 CRITICAL |
| Inbit Messenger versions 4.6.0 to 4.9.0 contain a remote stack-based buffer overflow vulnerability that allows unauthenticated attackers to execute arbitrary code by sending malformed network packets. Attackers can craft a specially designed payload targeting the messenger's network handler to overwrite the Structured Exception Handler (SEH) and execute shellcode on vulnerable Windows systems. | |||||
| CVE-2023-54329 | 1 Inbit | 1 Inbit Messenger | 2026-01-30 | N/A | 9.8 CRITICAL |
| Inbit Messenger 4.6.0 - 4.9.0 contains a remote command execution vulnerability that allows unauthenticated attackers to execute arbitrary commands by exploiting a stack overflow in the messenger's protocol. Attackers can send specially crafted XML packets to port 10883 with a malicious payload to trigger the vulnerability and execute commands with system privileges. | |||||
| CVE-2021-47789 | 1 Yenkee | 2 Yms 3029, Yms 3029 Firmware | 2026-01-30 | N/A | 7.5 HIGH |
| Yenkee Hornet Gaming Mouse driver GM312Fltr.sys contains a buffer overrun vulnerability that allows attackers to crash the system by sending oversized input. Attackers can exploit the driver by sending a 2000-byte buffer through DeviceIoControl to trigger a kernel-level system crash. | |||||
| CVE-2026-22260 | 1 Oisf | 1 Suricata | 2026-01-29 | N/A | 7.5 HIGH |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, Suricata can crash with a stack overflow. Version 8.0.3 patches the issue. As a workaround, use default values for `request-body-limit` and `response-body-limit`. | |||||
| CVE-2026-22262 | 1 Oisf | 1 Suricata | 2026-01-29 | N/A | 5.9 MEDIUM |
| Suricata is a network IDS, IPS and NSM engine. While saving a dataset a stack buffer is used to prepare the data. Prior to versions 8.0.3 and 7.0.14, if the data in the dataset is too large, this can result in a stack overflow. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not use rules with datasets `save` nor `state` options. | |||||