Total
1108 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-33953 | 1 Grpc | 1 Grpc | 2024-11-21 | N/A | 7.5 HIGH |
| gRPC contains a vulnerability that allows hpack table accounting errors could lead to unwanted disconnects between clients and servers in exceptional cases/ Three vectors were found that allow the following DOS attacks: - Unbounded memory buffering in the HPACK parser - Unbounded CPU consumption in the HPACK parser The unbounded CPU consumption is down to a copy that occurred per-input-block in the parser, and because that could be unbounded due to the memory copy bug we end up with an O(n^2) parsing loop, with n selected by the client. The unbounded memory buffering bugs: - The header size limit check was behind the string reading code, so we needed to first buffer up to a 4 gigabyte string before rejecting it as longer than 8 or 16kb. - HPACK varints have an encoding quirk whereby an infinite number of 0’s can be added at the start of an integer. gRPC’s hpack parser needed to read all of them before concluding a parse. - gRPC’s metadata overflow check was performed per frame, so that the following sequence of frames could cause infinite buffering: HEADERS: containing a: 1 CONTINUATION: containing a: 2 CONTINUATION: containing a: 3 etc… | |||||
| CVE-2023-32699 | 1 Metersphere | 1 Metersphere | 2024-11-21 | N/A | 6.5 MEDIUM |
| MeterSphere is an open source continuous testing platform. Version 2.9.1 and prior are vulnerable to denial of service. ?The `checkUserPassword` method is used to check whether the password provided by the user matches the password saved in the database, and the `CodingUtil.md5` method is used to encrypt the original password with MD5 to ensure that the password will not be saved in plain text when it is stored. If a user submits a very long password when logging in, the system will be forced to execute the long password MD5 encryption process, causing the server CPU and memory to be exhausted, thereby causing a denial of service attack on the server. This issue is fixed in version 2.10.0-lts with a maximum password length. | |||||
| CVE-2023-32481 | 1 Dell | 1 Wyse Management Suite | 2024-11-21 | N/A | 4.9 MEDIUM |
| Wyse Management Suite versions prior to 4.0 contain a denial-of-service vulnerability. An authenticated malicious user can flood the configured SMTP server with numerous requests in order to deny access to the system. | |||||
| CVE-2023-32187 | 1 K3s | 1 K3s | 2024-11-21 | N/A | 7.5 HIGH |
| An Allocation of Resources Without Limits or Throttling vulnerability in SUSE k3s allows attackers with access to K3s servers' apiserver/supervisor port (TCP 6443) cause denial of service. This issue affects k3s: from v1.24.0 before v1.24.17+k3s1, from v1.25.0 before v1.25.13+k3s1, from v1.26.0 before v1.26.8+k3s1, from sev1.27.0 before v1.27.5+k3s1, from v1.28.0 before v1.28.1+k3s1. | |||||
| CVE-2023-32186 | 1 Suse | 1 Rancher Rke2 | 2024-11-21 | N/A | 7.5 HIGH |
| A Allocation of Resources Without Limits or Throttling vulnerability in SUSE RKE2 allows attackers with access to K3s servers apiserver/supervisor port (TCP 6443) cause denial of service. This issue affects RKE2: from 1.24.0 before 1.24.17+rke2r1, from v1.25.0 before v1.25.13+rke2r1, from v1.26.0 before v1.26.8+rke2r1, from v1.27.0 before v1.27.5+rke2r1, from v1.28.0 before v1.28.1+rke2r1. | |||||
| CVE-2023-30551 | 1 Linuxfoundation | 1 Rekor | 2024-11-21 | N/A | 7.5 HIGH |
| Rekor is an open source software supply chain transparency log. Rekor prior to version 1.1.1 may crash due to out of memory (OOM) conditions caused by reading archive metadata files into memory without checking their sizes first. Verification of a JAR file submitted to Rekor can cause an out of memory crash if files within the META-INF directory of the JAR are sufficiently large. Parsing of an APK file submitted to Rekor can cause an out of memory crash if the .SIGN or .PKGINFO files within the APK are sufficiently large. The OOM crash has been patched in Rekor version 1.1.1. There are no known workarounds. | |||||
| CVE-2023-2828 | 4 Debian, Fedoraproject, Isc and 1 more | 14 Debian Linux, Fedora, Bind and 11 more | 2024-11-21 | N/A | 7.5 HIGH |
| Every `named` instance configured to run as a recursive resolver maintains a cache database holding the responses to the queries it has recently sent to authoritative servers. The size limit for that cache database can be configured using the `max-cache-size` statement in the configuration file; it defaults to 90% of the total amount of memory available on the host. When the size of the cache reaches 7/8 of the configured limit, a cache-cleaning algorithm starts to remove expired and/or least-recently used RRsets from the cache, to keep memory use below the configured limit. It has been discovered that the effectiveness of the cache-cleaning algorithm used in `named` can be severely diminished by querying the resolver for specific RRsets in a certain order, effectively allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.11.0 through 9.16.41, 9.18.0 through 9.18.15, 9.19.0 through 9.19.13, 9.11.3-S1 through 9.16.41-S1, and 9.18.11-S1 through 9.18.15-S1. | |||||
| CVE-2023-2666 | 1 Froxlor | 1 Froxlor | 2024-11-21 | N/A | 7.5 HIGH |
| Allocation of Resources Without Limits or Throttling in GitHub repository froxlor/froxlor prior to 2.0.16. | |||||
| CVE-2023-29973 | 1 Pfsense | 1 Pfsense | 2024-11-21 | N/A | 4.9 MEDIUM |
| Pfsense CE version 2.6.0 is vulnerable to No rate limit which can lead to an attacker creating multiple malicious users in firewall. | |||||
| CVE-2023-29449 | 1 Zabbix | 1 Zabbix | 2024-11-21 | N/A | 5.9 MEDIUM |
| JavaScript preprocessing, webhooks and global scripts can cause uncontrolled CPU, memory, and disk I/O utilization. Preprocessing/webhook/global script configuration and testing are only available to Administrative roles (Admin and Superadmin). Administrative privileges should be typically granted to users who need to perform tasks that require more control over the system. The security risk is limited because not all users have this level of access. | |||||
| CVE-2023-29408 | 2 Fedoraproject, Golang | 2 Fedora, Image | 2024-11-21 | N/A | 6.5 MEDIUM |
| The TIFF decoder does not place a limit on the size of compressed tile data. A maliciously-crafted image can exploit this to cause a small image (both in terms of pixel width/height, and encoded size) to make the decoder decode large amounts of compressed data, consuming excessive memory and CPU. | |||||
| CVE-2023-28968 | 1 Juniper | 31 Appid Service Sigpack, Jdpi-decoder Engine, Junos and 28 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; | |||||
| CVE-2023-28899 | 1 Skoda-auto | 2 Superb 3, Superb 3 Firmware | 2024-11-21 | N/A | 4.7 MEDIUM |
| By sending a specific reset UDS request via OBDII port of Skoda vehicles, it is possible to cause vehicle engine shutdown and denial of service of other vehicle components even when the vehicle is moving at a high speed. No safety critical functions affected. | |||||
| CVE-2023-28867 | 1 Graphql-java | 1 Graphql-java | 2024-11-21 | N/A | 7.5 HIGH |
| In GraphQL Java (aka graphql-java) before 20.1, an attacker can send a crafted GraphQL query that causes stack consumption. The fixed versions are 20.1, 19.4, 18.4, 17.5, and 0.0.0-2023-03-20T01-49-44-80e3135. | |||||
| CVE-2023-28837 | 1 Torchbox | 1 Wagtail | 2024-11-21 | N/A | 4.9 MEDIUM |
| Wagtail is an open source content management system built on Django. Prior to versions 4.1.4 and 4.2.2, a memory exhaustion bug exists in Wagtail's handling of uploaded images and documents. For both images and documents, files are loaded into memory during upload for additional processing. A user with access to upload images or documents through the Wagtail admin interface could upload a file so large that it results in a crash of denial of service. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. It can only be exploited by admin users with permission to upload images or documents. Image uploads are restricted to 10MB by default, however this validation only happens on the frontend and on the backend after the vulnerable code. Patched versions have been released as Wagtail 4.1.4 and Wagtail 4.2.2). Site owners who are unable to upgrade to the new versions are encouraged to add extra protections outside of Wagtail to limit the size of uploaded files. | |||||
| CVE-2023-28428 | 1 Pdfio Project | 1 Pdfio | 2024-11-21 | N/A | 6.2 MEDIUM |
| PDFio is a C library for reading and writing PDF files. In versions 1.1.0 and prior, a denial of service vulnerability exists in the pdfio parser. Crafted pdf files can cause the program to run at 100% utilization and never terminate. This is different from CVE-2023-24808. A patch for this issue is available in version 1.1.1. | |||||
| CVE-2023-28338 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2024-11-21 | N/A | 7.5 HIGH |
| Any request send to a Netgear Nighthawk Wifi6 Router (RAX30)'s web service containing a “Content-Type” of “multipartboundary=” will result in the request body being written to “/tmp/mulipartFile” on the device itself. A sufficiently large file will cause device resources to be exhausted, resulting in the device becoming unusable until it is rebooted. | |||||
| CVE-2023-28119 | 1 Saml Project | 1 Saml | 2024-11-21 | N/A | 7.5 HIGH |
| The crewjam/saml go library contains a partial implementation of the SAML standard in golang. Prior to version 0.4.13, the package's use of `flate.NewReader` does not limit the size of the input. The user can pass more than 1 MB of data in the HTTP request to the processing functions, which will be decompressed server-side using the Deflate algorithm. Therefore, after repeating the same request multiple times, it is possible to achieve a reliable crash since the operating system kills the process. This issue is patched in version 0.4.13. | |||||
| CVE-2023-28107 | 1 Discourse | 1 Discourse | 2024-11-21 | N/A | 4.5 MEDIUM |
| Discourse is an open-source discussion platform. Prior to version 3.0.2 of the `stable` branch and version 3.1.0.beta3 of the `beta` and `tests-passed` branches, a user logged as an administrator can request backups multiple times, which will eat up all the connections to the DB. If this is done on a site using multisite, then it can affect the whole cluster. The vulnerability is patched in version 3.0.2 of the `stable` branch and version 3.1.0.beta3 of the `beta` and `tests-passed` branches. There are no known workarounds. | |||||
| CVE-2023-28104 | 1 Silverstripe | 1 Graphql | 2024-11-21 | N/A | 7.5 HIGH |
| `silverstripe/graphql` serves Silverstripe data as GraphQL representations. In versions 4.2.2 and 4.1.1, an attacker could use a specially crafted graphql query to execute a denial of service attack against a website which has a publicly exposed graphql endpoint. This mostly affects websites with particularly large/complex graphql schemas. Users should upgrade to `silverstripe/graphql` 4.2.3 or 4.1.2 to remedy the vulnerability. | |||||