Total
1310 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26707 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame() Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). | |||||
| CVE-2023-52622 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ˜ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. | |||||
| CVE-2024-26646 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: hfi: Add syscore callbacks for system-wide PM The kernel allocates a memory buffer and provides its location to the hardware, which uses it to update the HFI table. This allocation occurs during boot and remains constant throughout runtime. When resuming from hibernation, the restore kernel allocates a second memory buffer and reprograms the HFI hardware with the new location as part of a normal boot. The location of the second memory buffer may differ from the one allocated by the image kernel. When the restore kernel transfers control to the image kernel, its HFI buffer becomes invalid, potentially leading to memory corruption if the hardware writes to it (the hardware continues to use the buffer from the restore kernel). It is also possible that the hardware "forgets" the address of the memory buffer when resuming from "deep" suspend. Memory corruption may also occur in such a scenario. To prevent the described memory corruption, disable HFI when preparing to suspend or hibernate. Enable it when resuming. Add syscore callbacks to handle the package of the boot CPU (packages of non-boot CPUs are handled via CPU offline). Syscore ops always run on the boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend and hibernation. Syscore ops only run in these cases. [ rjw: Comment adjustment, subject and changelog edits ] | |||||
| CVE-2021-47170 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbfs: Don't WARN about excessively large memory allocations Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. | |||||
| CVE-2025-29786 | 2025-03-17 | N/A | 7.5 HIGH | ||
| Expr is an expression language and expression evaluation for Go. Prior to version 1.17.0, if the Expr expression parser is given an unbounded input string, it will attempt to compile the entire string and generate an Abstract Syntax Tree (AST) node for each part of the expression. In scenarios where input size isn’t limited, a malicious or inadvertent extremely large expression can consume excessive memory as the parser builds a huge AST. This can ultimately lead to*excessive memory usage and an Out-Of-Memory (OOM) crash of the process. This issue is relatively uncommon and will only manifest when there are no restrictions on the input size, i.e. the expression length is allowed to grow arbitrarily large. In typical use cases where inputs are bounded or validated, this problem would not occur. The problem has been patched in the latest versions of the Expr library. The fix introduces compile-time limits on the number of AST nodes and memory usage during parsing, preventing any single expression from exhausting resources. Users should upgrade to Expr version 1.17.0 or later, as this release includes the new node budget and memory limit safeguards. Upgrading to v1.17.0 ensures that extremely deep or large expressions are detected and safely aborted during compilation, avoiding the OOM condition. For users who cannot immediately upgrade, the recommended workaround is to impose an input size restriction before parsing. In practice, this means validating or limiting the length of expression strings that your application will accept. For example, set a maximum allowable number of characters (or nodes) for any expression and reject or truncate inputs that exceed this limit. By ensuring no unbounded-length expression is ever fed into the parser, one can prevent the parser from constructing a pathologically large AST and avoid potential memory exhaustion. In short, pre-validate and cap input size as a safeguard in the absence of the patch. | |||||
| CVE-2023-26249 | 1 Nic | 1 Knot Resolver | 2025-03-14 | N/A | 7.5 HIGH |
| Knot Resolver before 5.6.0 enables attackers to consume its resources, launching amplification attacks and potentially causing a denial of service. Specifically, a single client query may lead to a hundred TCP connection attempts if a DNS server closes connections without providing a response. | |||||
| CVE-2024-50955 | 2025-03-13 | N/A | 7.5 HIGH | ||
| An issue in how XINJE XD5E-24R and XL5E-16T v3.5.3b handles TCP protocol messages allows attackers to cause a Denial of Service (DoS) via a crafted TCP message. | |||||
| CVE-2024-46933 | 2025-03-13 | N/A | 7.7 HIGH | ||
| An issue was discovered in Atos Eviden BullSequana XH2140 BMC before C4EM-125: OMF_C4E 101.05.0014. Some BullSequana XH products were shipped without proper hardware programming, leading to a potential denial-of-service with privileged access. | |||||
| CVE-2023-23916 | 5 Debian, Fedoraproject, Haxx and 2 more | 13 Debian Linux, Fedora, Curl and 10 more | 2025-03-12 | N/A | 6.5 MEDIUM |
| An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the "chained" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable "links" in this "decompression chain" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a "malloc bomb", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors. | |||||
| CVE-2024-57972 | 2025-03-07 | N/A | 6.5 MEDIUM | ||
| The pairing API request handler in Microsoft HoloLens 1 (Windows Holographic) through 10.0.17763.3046 and HoloLens 2 (Windows Holographic) through 10.0.22621.1244 allows remote attackers to cause a Denial of Service (resource consumption and device unusability) by sending many requests through the Device Portal framework. | |||||
| CVE-2025-27795 | 2025-03-07 | N/A | 4.3 MEDIUM | ||
| ReadJXLImage in JXL in GraphicsMagick before 1.3.46 lacks image dimension resource limits. | |||||
| CVE-2024-31992 | 1 Mealie | 1 Mealie | 2025-03-07 | N/A | 6.5 MEDIUM |
| Mealie is a self hosted recipe manager and meal planner. Prior to 1.4.0, the safe_scrape_html function utilizes a user-controlled URL to issue a request to a remote server, however these requests are not rate-limited. While there are efforts to prevent DDoS by implementing a timeout on requests, it is possible for an attacker to issue a large number of requests to the server which will be handled in batches based on the configuration of the Mealie server. The chunking of responses is helpful for mitigating memory exhaustion on the Mealie server, however a single request to an arbitrarily large external file (e.g. a Debian ISO) is often sufficient to completely saturate a CPU core assigned to the Mealie container. Without rate limiting in place, it is possible to not only sustain traffic against an external target indefinitely, but also to exhaust the CPU resources assigned to the Mealie container. This vulnerability is fixed in 1.4.0. | |||||
| CVE-2024-38316 | 1 Ibm | 1 Aspera Shares | 2025-03-06 | N/A | 4.3 MEDIUM |
| IBM Aspera Shares 1.9.0 through 1.10.0 PL6 does not properly rate limit the frequency that an authenticated user can send emails, which could result in email flooding or a denial of service. | |||||
| CVE-2025-27513 | 2025-03-05 | N/A | 7.5 HIGH | ||
| OpenTelemetry dotnet is a dotnet telemetry framework. A vulnerability in OpenTelemetry.Api package 1.10.0 to 1.11.1 could cause a Denial of Service (DoS) when a tracestate and traceparent header is received. Even if an application does not explicitly use trace context propagation, receiving these headers can still trigger high CPU usage. This issue impacts any application accessible over the web or backend services that process HTTP requests containing a tracestate header. Application may experience excessive resource consumption, leading to increased latency, degraded performance, or downtime. This vulnerability is fixed in 1.11.2. | |||||
| CVE-2025-22273 | 2025-03-05 | N/A | N/A | ||
| Application does not limit the number or frequency of user interactions, such as the number of incoming requests. At the "/EPMUI/VfManager.asmx/ChangePassword" endpoint it is possible to perform a brute force attack on the current password in use. This issue affects CyberArk Endpoint Privilege Manager in SaaS version 24.7.1. The status of other versions is unknown. After multiple attempts to contact the vendor we did not receive any answer. | |||||
| CVE-2025-27219 | 1 Ruby-lang | 1 Cgi | 2025-03-05 | N/A | 5.8 MEDIUM |
| In the CGI gem before 0.4.2 for Ruby, the CGI::Cookie.parse method in the CGI library contains a potential Denial of Service (DoS) vulnerability. The method does not impose any limit on the length of the raw cookie value it processes. This oversight can lead to excessive resource consumption when parsing extremely large cookies. | |||||
| CVE-2025-27419 | 2025-03-03 | N/A | N/A | ||
| WeGIA is an open source Web Manager for Institutions with a focus on Portuguese language users. A Denial of Service (DoS) vulnerability exists in WeGIA. This vulnerability allows any unauthenticated user to cause the server to become unresponsive by performing aggressive spidering. The vulnerability is caused by recursive crawling of dynamically generated URLs and insufficient handling of large volumes of requests. This vulnerability is fixed in 3.2.16. | |||||
| CVE-2023-27901 | 1 Jenkins | 1 Jenkins | 2025-02-28 | N/A | 7.5 HIGH |
| Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in org.kohsuke.stapler.RequestImpl, allowing attackers to trigger a denial of service. | |||||
| CVE-2023-27900 | 1 Jenkins | 1 Jenkins | 2025-02-28 | N/A | 7.5 HIGH |
| Jenkins 2.393 and earlier, LTS 2.375.3 and earlier uses the Apache Commons FileUpload library without specifying limits for the number of request parts introduced in version 1.5 for CVE-2023-24998 in hudson.util.MultipartFormDataParser, allowing attackers to trigger a denial of service. | |||||
| CVE-2024-25026 | 1 Ibm | 1 Websphere Application Server | 2025-02-27 | N/A | 5.9 MEDIUM |
| IBM WebSphere Application Server 8.5, 9.0 and IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 are vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 281516. | |||||