Total
108 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-32942 | 2025-10-02 | N/A | 7.2 HIGH | ||
| SSH Tectia Server before 6.6.6 sometimes allows attackers to read and alter a user's session traffic. | |||||
| CVE-2024-53134 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx93-blk-ctrl: correct remove path The check condition should be 'i < bc->onecell_data.num_domains', not 'bc->onecell_data.num_domains' which will make the look never finish and cause kernel panic. Also disable runtime to address "imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!" | |||||
| CVE-2024-47763 | 1 Bytecodealliance | 1 Wasmtime | 2025-09-29 | N/A | 5.5 MEDIUM |
| Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime first enabled support for tail calls by default in Wasmtime 21.0.0, although that release contained a bug where it was only on-by-default for some configurations. In Wasmtime 22.0.0 tail calls were enabled by default for all configurations. The specific crash happens when an exported function in a WebAssembly module (or component) performs a `return_call` (or `return_call_indirect` or `return_call_ref`) to an imported host function which captures a stack trace (for example, the host function raises a trap). In this situation, the stack-walking code previously assumed there was always at least one WebAssembly frame on the stack but with tail calls that is no longer true. With the tail-call proposal it's possible to have an entry trampoline appear as if it directly called the exit trampoline. This situation triggers an internal assert in the stack-walking code which raises a Rust `panic!()`. When Wasmtime is compiled with Rust versions 1.80 and prior this means that an `extern "C"` function in Rust is raising a `panic!()`. This is technically undefined behavior and typically manifests as a process abort when the unwinder fails to unwind Cranelift-generated frames. When Wasmtime is compiled with Rust versions 1.81 and later this panic becomes a deterministic process abort. Overall the impact of this issue is that this is a denial-of-service vector where a malicious WebAssembly module or component can cause the host to crash. There is no other impact at this time other than availability of a service as the result of the crash is always a crash and no more. This issue was discovered by routine fuzzing performed by the Wasmtime project via Google's OSS-Fuzz infrastructure. We have no evidence that it has ever been exploited by an attacker in the wild. All versions of Wasmtime which have tail calls enabled by default have been patched: * 21.0.x - patched in 21.0.2 * 22.0.x - patched in 22.0.1 * 23.0.x - patched in 23.0.3 * 24.0.x - patched in 24.0.1 * 25.0.x - patched in 25.0.2. Wasmtime versions from 12.0.x (the first release with experimental tail call support) to 20.0.x (the last release with tail-calls off-by-default) have support for tail calls but the support is disabled by default. These versions are not affected in their default configurations, but users who explicitly enabled tail call support will need to either disable tail call support or upgrade to a patched version of Wasmtime. The main workaround for this issue is to disable tail support for tail calls in Wasmtime, for example with `Config::wasm_tail_call(false)`. Users are otherwise encouraged to upgrade to patched versions. | |||||
| CVE-2023-52742 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: USB: Fix wrong-direction WARNING in plusb.c The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. | |||||
| CVE-2023-52781 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. | |||||
| CVE-2022-49393 | 1 Linux | 1 Linux Kernel | 2025-09-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-2886 | 1 Amazon | 1 Tough | 2025-09-19 | N/A | 4.5 MEDIUM |
| Missing validation of terminating delegation causes the client to continue searching the defined delegation list, even after searching a terminating delegation. This could cause the client to fetch a target from an incorrect source, altering the target contents. Users should upgrade to tough version 0.20.0 or later and ensure any forked or derivative code is patched to incorporate the new fixes. | |||||
| CVE-2024-33431 | 1 Stsaz | 1 Phiola | 2025-09-19 | N/A | 6.5 MEDIUM |
| An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file. | |||||
| CVE-2025-43359 | 1 Apple | 6 Ipados, Iphone Os, Macos and 3 more | 2025-09-17 | N/A | 9.8 CRITICAL |
| A logic issue was addressed with improved state management. This issue is fixed in tvOS 26, macOS Sonoma 14.8, macOS Sequoia 15.7, iOS 18.7 and iPadOS 18.7, visionOS 26, watchOS 26, macOS Tahoe 26, iOS 26 and iPadOS 26. A UDP server socket bound to a local interface may become bound to all interfaces. | |||||
| CVE-2024-53271 | 1 Envoyproxy | 1 Envoy | 2025-09-04 | N/A | 7.1 HIGH |
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions envoy does not properly handle http 1.1 non-101 1xx responses. This can lead to downstream failures in networked devices. This issue has been addressed in versions 1.31.5 and 1.32.3. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2024-53270 | 1 Envoyproxy | 1 Envoy | 2025-09-04 | N/A | 7.5 HIGH |
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold. | |||||
| CVE-2024-53269 | 1 Envoyproxy | 1 Envoy | 2025-08-28 | N/A | 4.5 MEDIUM |
| Envoy is a cloud-native high-performance edge/middle/service proxy. When additional address are not ip addresses, then the Happy Eyeballs sorting algorithm will crash in data plane. This issue has been addressed in releases 1.32.2, 1.31.4, and 1.30.8. Users are advised to upgrade. Users unable to upgrade may disable Happy Eyeballs and/or change the IP configuration. | |||||
| CVE-2024-35190 | 1 Sangoma | 1 Asterisk | 2025-08-26 | N/A | 5.8 MEDIUM |
| Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1. | |||||
| CVE-2024-38365 | 1 Btcd Project | 1 Btcd | 2025-08-20 | N/A | 7.4 HIGH |
| btcd is an alternative full node bitcoin implementation written in Go (golang). The btcd Bitcoin client (versions 0.10 to 0.24) did not correctly re-implement Bitcoin Core's "FindAndDelete()" functionality. This logic is consensus-critical: the difference in behavior with the other Bitcoin clients can lead to btcd clients accepting an invalid Bitcoin block (or rejecting a valid one). This consensus failure can be leveraged to cause a chain split (accepting an invalid Bitcoin block) or be exploited to DoS the btcd nodes (rejecting a valid Bitcoin block). An attacker can create a standard transaction where FindAndDelete doesn't return a match but removeOpCodeByData does making btcd get a different sighash, leading to a chain split. Importantly, this vulnerability can be exploited remotely by any Bitcoin user and does not require any hash power. This is because the difference in behavior can be triggered by a "standard" Bitcoin transaction, that is a transaction which gets relayed through the P2P network before it gets included in a Bitcoin block. `removeOpcodeByData(script []byte, dataToRemove []byte)` removes any data pushes from `script` that contain `dataToRemove`. However, `FindAndDelete` only removes exact matches. So for example, with `script = "<data> <data||foo>"` and `dataToRemove = "data"` btcd will remove both data pushes but Bitcoin Core's `FindAndDelete` only removes the first `<data>` push. This has been patched in btcd version v0.24.2. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2024-30246 | 1 Enalean | 1 Tuleap | 2025-07-10 | N/A | 7.6 HIGH |
| Tuleap is an Open Source Suite to improve management of software developments and collaboration. A malicious user could exploit this issue on purpose to delete information on the instance or possibly gain access to restricted artifacts. It is however not possible to control exactly which information is deleted. Information from theDate, File, Float, Int, List, OpenList, Text, and Permissions on artifact (this one can lead to the disclosure of restricted information) fields can be impacted. This vulnerability is fixed in Tuleap Community Edition version 15.7.99.6 and Tuleap Enterprise Edition 15.7-2, 15.6-5, 15.5-6, 15.4-8, 15.3-6, 15.2-5, 15.1-9, 15.0-9, and 14.12-6. | |||||
| CVE-2025-49091 | 2025-06-18 | N/A | 8.2 HIGH | ||
| KDE Konsole before 25.04.2 allows remote code execution in a certain scenario. It supports loading URLs from the scheme handlers such as a ssh:// or telnet:// or rlogin:// URL. This can be executed regardless of whether the ssh, telnet, or rlogin binary is available. In this mode, there is a code path where if that binary is not available, Konsole falls back to using /bin/bash for the given arguments (i.e., the URL) provided. This allows an attacker to execute arbitrary code. | |||||
| CVE-2022-26461 | 2 Google, Mediatek | 15 Android, Mt6833, Mt6853 and 12 more | 2025-06-12 | N/A | 6.7 MEDIUM |
| In vow, there is a possible undefined behavior due to an API misuse. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07032604; Issue ID: ALPS07032604. | |||||
| CVE-2022-45196 | 1 Hyperledger | 1 Fabric | 2025-05-01 | N/A | 7.5 HIGH |
| Hyperledger Fabric 2.3 allows attackers to cause a denial of service (orderer crash) by repeatedly sending a crafted channel tx with the same Channel name. NOTE: the official Fabric with Raft prevents exploitation via a locking mechanism and a check for names that already exist. | |||||
| CVE-2025-21607 | 1 Vyperlang | 1 Vyper | 2025-04-24 | N/A | 7.5 HIGH |
| Vyper is a Pythonic Smart Contract Language for the EVM. When the Vyper Compiler uses the precompiles EcRecover (0x1) and Identity (0x4), the success flag of the call is not checked. As a consequence an attacker can provide a specific amount of gas to make these calls fail but let the overall execution continue. Then the execution result can be incorrect. Based on EVM's rules, after the failed precompile the remaining code has only 1/64 of the pre-call-gas left (as 63/64 were forwarded and spent). Hence, only fairly simple executions can follow the failed precompile calls. Therefore, we found no significantly impacted real-world contracts. None the less an advisory has been made out of an abundance of caution. This issue is fixed in 0.4.1. | |||||
| CVE-2023-1668 | 3 Cloudbase, Debian, Redhat | 7 Open Vswitch, Debian Linux, Enterprise Linux and 4 more | 2025-04-23 | N/A | 8.2 HIGH |
| A flaw was found in openvswitch (OVS). When processing an IP packet with protocol 0, OVS will install the datapath flow without the action modifying the IP header. This issue results (for both kernel and userspace datapath) in installing a datapath flow matching all IP protocols (nw_proto is wildcarded) for this flow, but with an incorrect action, possibly causing incorrect handling of other IP packets with a != 0 IP protocol that matches this dp flow. | |||||