Total
5472 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53298 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue() If queue entry or DMA descriptor list allocation fails in airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a NULL pointer dereference running netif_napi_del() for RX queue NAPIs since netif_napi_add() has never been executed to this particular RX NAPI. The issue is due to the early ndesc initialization in airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc value to check if the queue is properly initialized. Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine. Move page_pool allocation after descriptor list allocation in order to avoid memory leaks if desc allocation fails. | |||||
| CVE-2026-53299 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx() If queue entry list allocation fails in airoha_qdma_init_tx_queue routine, airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference accessing the queue entry array. The issue is due to the early ndesc initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine. | |||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | |||||
| CVE-2026-53158 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. | |||||
| CVE-2026-53165 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host, ...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). The error reporting path then can dereference a NULL folio->mapping. As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_bytes_pending -= len finished = false /* preempted before fserror_report_io() */ read_bytes_pending -= len finished = true folio_end_read() truncate clears folio->mapping fserror_report_io( folio->mapping->host, ...) ^ NULL deref Fix this by reporting the error first before decrementing ifs->read_bytes_pending. | |||||
| CVE-2026-38976 | 2026-07-07 | N/A | 7.5 HIGH | ||
| mrubyc through 3.4.1 was found to contain a NULL pointer dereference in src/vm.c in op_super() / OP_SUPER due to a missing runtime guard for top-level super. | |||||
| CVE-2026-53135 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) | |||||
| CVE-2026-53144 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL dereference in get_queue_ids() When usr_queue_id_array is NULL and num_queues is non-zero, get_queue_ids() returns NULL. The callers check only IS_ERR() on the return value; since IS_ERR(NULL) == false the check passes, and suspend_queues() calls q_array_invalidate() which immediately dereferences NULL while iterating num_queues times. Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying num_queues > 0 with a zero queue_array_ptr, causing a kernel panic. A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op (q_array_invalidate never executes, and resume_queues already guards all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL) only when num_queues is non-zero and the pointer is absent; both callers already propagate IS_ERR() returns correctly to userspace. (cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) | |||||
| CVE-2026-53301 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: reset: amlogic: t7: Fix null reset ops Fix missing reset ops causing kernel null pointer dereference. This SOC's reset is currently not used yet. | |||||
| CVE-2026-53302 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug] | |||||
| CVE-2026-53305 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ps883x: Fix Oops at unbind When trying to unbind a device in order to bind to it vfio-platform as: echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind I get the following Oops: [ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 436.487762] Mem abort info: [ 436.490716] ESR = 0x0000000096000004 [ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits [ 436.500071] SET = 0, FnV = 0 [ 436.503250] EA = 0, S1PTW = 0 [ 436.506505] FSC = 0x04: level 0 translation fault [ 436.511533] Data abort info: [ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000 [ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP [ 436.550374] Modules linked in: [ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT [ 436.564440] Tainted: [W]=WARN [ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025 [ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 436.581841] pc : ps883x_retimer_remove+0x14/0x94 [ 436.586605] lr : i2c_device_remove+0x28/0x84 [ 436.591017] sp : ffff8000847137c0 That's because the ps883x_retimer_remove() retrieves the driver data from i2c_get_clientdata() which was never set at probe. So, add i2c_set_clientdata() at the end of the probe. | |||||
| CVE-2026-53307 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fully validate 'pinmux' property The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property is not empty when present. This might be not true. With that, the allocator will give a special value in return and not NULL which lead to the crash when trying to access that (invalid) memory. Fix that by fully validating 'pinmux' value, including its length. | |||||
| CVE-2026-53313 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) | |||||
| CVE-2026-53315 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp() ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp (in seconds since the Unix epoch) through a platform-specific RAS system callback and is used for timestamping RAS error events. The function checks ras_core in the conditional statement before calling the sys_fn callback. However, when the condition fails, the function prints an error message using ras_core->dev. If ras_core is NULL, this can lead to a potential NULL pointer dereference when accessing ras_core->dev. Add an early NULL check for ras_core at the beginning of the function and return 0 when the pointer is not valid. This prevents the dereference and makes the control flow clearer. | |||||
| CVE-2026-53316 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/ras: Fix NULL deref in ras_core_ras_interrupt_detected() Fixes a NULL pointer dereference when ras_core is NULL and ras_core->dev is accessed in the error path. Reported by: Dan Carpenter <dan.carpenter@linaro.org> | |||||
| CVE-2026-53318 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_tx_check_aggr() Move the NULL check for 'sta' before dereferencing it to prevent a possible crash. | |||||
| CVE-2026-53324 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system. | |||||
| CVE-2026-53325 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. | |||||
| CVE-2026-53177 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. | |||||
| CVE-2026-14790 | 2026-07-06 | 1.7 LOW | 3.3 LOW | ||
| A flaw has been found in GPAC 26.02.0. This affects the function nhmldump_send_frame of the file src/filters/write_nhml.c of the component Media File Handler. Executing a manipulation can lead to null pointer dereference. The attack requires local access. The exploit has been published and may be used. This patch is called bd1d94e70e3bef364c07c5a1d94eca5c9f56e160. A patch should be applied to remediate this issue. The project explains: "I would consider most of these more as bugs than vulns but anyway they're good to fix". | |||||