Total
4069 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-22031 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion When BIOS neglects to assign bus numbers to PCI bridges, the kernel attempts to correct that during PCI device enumeration. If it runs out of bus numbers, no pci_bus is allocated and the "subordinate" pointer in the bridge's pci_dev remains NULL. The PCIe bandwidth controller erroneously does not check for a NULL subordinate pointer and dereferences it on probe. Bandwidth control of unusable devices below the bridge is of questionable utility, so simply error out instead. This mirrors what PCIe hotplug does since commit 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp probe"). The PCI core emits a message with KERN_INFO severity if it has run out of bus numbers. PCIe hotplug emits an additional message with KERN_ERR severity to inform the user that hotplug functionality is disabled at the bridge. A similar message for bandwidth control does not seem merited, given that its only purpose so far is to expose an up-to-date link speed in sysfs and throttle the link speed on certain laptops with limited Thermal Design Power. So error out silently. User-visible messages: pci 0000:16:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [...] pci_bus 0000:45: busn_res: [bus 45-74] end is updated to 74 pci 0000:16:02.0: devices behind bridge are unusable because [bus 45-74] cannot be assigned for them [...] pcieport 0000:16:02.0: pciehp: Hotplug bridge without secondary bus, ignoring [...] BUG: kernel NULL pointer dereference RIP: pcie_update_link_speed pcie_bwnotif_enable pcie_bwnotif_probe pcie_port_probe_service really_probe | |||||
| CVE-2025-22027 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: streamzap: fix race between device disconnection and urb callback Syzkaller has reported a general protection fault at function ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer dereference of dev->raw pointer, even though it is checked for NULL in the same function, which means there is a race condition. It occurs due to the incorrect order of actions in the streamzap_disconnect() function: rc_unregister_device() is called before usb_kill_urb(). The dev->raw pointer is freed and set to NULL in rc_unregister_device(), and only after that usb_kill_urb() waits for in-progress requests to finish. If rc_unregister_device() is called while streamzap_callback() handler is not finished, this can lead to accessing freed resources. Thus rc_unregister_device() should be called after usb_kill_urb(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | |||||
| CVE-2025-22018 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: atm: Fix NULL pointer dereference When MPOA_cache_impos_rcvd() receives the msg, it can trigger Null Pointer Dereference Vulnerability if both entry and holding_time are NULL. Because there is only for the situation where entry is NULL and holding_time exists, it can be passed when both entry and holding_time are NULL. If these are NULL, the entry will be passd to eg_cache_put() as parameter and it is referenced by entry->use code in it. kasan log: [ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I [ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102 [ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470 [ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80 [ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006 [ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e [ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030 [ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88 [ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15 [ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068 [ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000 [ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0 [ 3.326430] Call Trace: [ 3.326725] <TASK> [ 3.326927] ? die_addr+0x3c/0xa0 [ 3.327330] ? exc_general_protection+0x161/0x2a0 [ 3.327662] ? asm_exc_general_protection+0x26/0x30 [ 3.328214] ? vprintk_emit+0x15e/0x420 [ 3.328543] ? eg_cache_remove_entry+0xa5/0x470 [ 3.328910] ? eg_cache_remove_entry+0x9a/0x470 [ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10 [ 3.329664] ? console_unlock+0x107/0x1d0 [ 3.329946] ? __pfx_console_unlock+0x10/0x10 [ 3.330283] ? do_syscall_64+0xa6/0x1a0 [ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f [ 3.331090] ? __pfx_prb_read_valid+0x10/0x10 [ 3.331395] ? down_trylock+0x52/0x80 [ 3.331703] ? vprintk_emit+0x15e/0x420 [ 3.331986] ? __pfx_vprintk_emit+0x10/0x10 [ 3.332279] ? down_trylock+0x52/0x80 [ 3.332527] ? _printk+0xbf/0x100 [ 3.332762] ? __pfx__printk+0x10/0x10 [ 3.333007] ? _raw_write_lock_irq+0x81/0xe0 [ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10 [ 3.333614] msg_from_mpoad+0x1185/0x2750 [ 3.333893] ? __build_skb_around+0x27b/0x3a0 [ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10 [ 3.334501] ? __alloc_skb+0x1c0/0x310 [ 3.334809] ? __pfx___alloc_skb+0x10/0x10 [ 3.335283] ? _raw_spin_lock+0xe0/0xe0 [ 3.335632] ? finish_wait+0x8d/0x1e0 [ 3.335975] vcc_sendmsg+0x684/0xba0 [ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10 [ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10 [ 3.337056] ? fdget+0x176/0x3e0 [ 3.337348] __sys_sendto+0x4a2/0x510 [ 3.337663] ? __pfx___sys_sendto+0x10/0x10 [ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400 [ 3.338364] ? sock_ioctl+0x1bb/0x5a0 [ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20 [ 3.339017] ? __pfx_sock_ioctl+0x10/0x10 [ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10 [ 3.339727] ? selinux_file_ioctl+0xa4/0x260 [ 3.340166] __x64_sys_sendto+0xe0/0x1c0 [ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140 [ 3.340898] do_syscall_64+0xa6/0x1a0 [ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 3.341533] RIP: 0033:0x44a380 [ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00 [ ---truncated--- | |||||
| CVE-2025-22009 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: regulator: dummy: force synchronous probing Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously. | |||||
| CVE-2025-22007 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix error code in chan_alloc_skb_cb() The chan_alloc_skb_cb() function is supposed to return error pointers on error. Returning NULL will lead to a NULL dereference. | |||||
| CVE-2025-22006 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix NAPI registration sequence Registering the interrupts for TX or RX DMA Channels prior to registering their respective NAPI callbacks can result in a NULL pointer dereference. This is seen in practice as a random occurrence since it depends on the randomness associated with the generation of traffic by Linux and the reception of traffic from the wire. | |||||
| CVE-2025-22002 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Call `invalidate_cache` only if implemented Many filesystems such as NFS and Ceph do not implement the `invalidate_cache` method. On those filesystems, if writing to the cache (`NETFS_WRITE_TO_CACHE`) fails for some reason, the kernel crashes like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP PTI CPU: 9 UID: 0 PID: 3380 Comm: kworker/u193:11 Not tainted 6.13.3-cm4all1-hp #437 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_write_collection_worker RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff9b86e2ca7dc0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 7fffffffffffffff RDX: 0000000000000001 RSI: ffff89259d576a18 RDI: ffff89259d576900 RBP: ffff89259d5769b0 R08: ffff9b86e2ca7d28 R09: 0000000000000002 R10: ffff89258ceaca80 R11: 0000000000000001 R12: 0000000000000020 R13: ffff893d158b9338 R14: ffff89259d576900 R15: ffff89259d5769b0 FS: 0000000000000000(0000) GS:ffff893c9fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000054442e003 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x15c/0x460 ? try_to_wake_up+0x2d2/0x530 ? exc_page_fault+0x5e/0x100 ? asm_exc_page_fault+0x22/0x30 netfs_write_collection_worker+0xe9f/0x12b0 ? xs_poll_check_readable+0x3f/0x80 ? xs_stream_data_receive_workfn+0x8d/0x110 process_one_work+0x134/0x2d0 worker_thread+0x299/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xba/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000000 This patch adds the missing `NULL` check. | |||||
| CVE-2022-49889 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters() On some machines the number of listed CPUs may be bigger than the actual CPUs that exist. The tracing subsystem allocates a per_cpu directory with access to the per CPU ring buffer via a cpuX file. But to save space, the ring buffer will only allocate buffers for online CPUs, even though the CPU array will be as big as the nr_cpu_ids. With the addition of waking waiters on the ring buffer when closing the file, the ring_buffer_wake_waiters() now needs to make sure that the buffer is allocated (with the irq_work allocated with it) before trying to wake waiters, as it will cause a NULL pointer dereference. While debugging this, I added a NULL check for the buffer itself (which is OK to do), and also NULL pointer checks against buffer->buffers (which is not fine, and will WARN) as well as making sure the CPU number passed in is within the nr_cpu_ids (which is also not fine if it isn't). Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705 | |||||
| CVE-2022-49863 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> | |||||
| CVE-2022-49848 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180). | |||||
| CVE-2022-49839 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_sas: Fix error handling in sas_phy_add() If transport_add_device() fails in sas_phy_add(), the kernel will crash trying to delete the device in transport_remove_device() called from sas_remove_host(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_phy_delete+0x30/0x60 [scsi_transport_sas] do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x40/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] hisi_sas_remove+0x40/0x68 [hisi_sas_main] hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw] platform_remove+0x2c/0x60 Fix this by checking and handling return value of transport_add_device() in sas_phy_add(). | |||||
| CVE-2020-36789 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com | |||||
| CVE-2022-49916 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rose: Fix NULL pointer dereference in rose_send_frame() The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) | |||||
| CVE-2022-49904 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately. | |||||
| CVE-2022-49895 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix decoder allocation crash When an intermediate port's decoders have been exhausted by existing regions, and creating a new region with the port in question in it's hierarchical path is attempted, cxl_port_attach_region() fails to find a port decoder (as would be expected), and drops into the failure / cleanup path. However, during cleanup of the region reference, a sanity check attempts to dereference the decoder, which in the above case didn't exist. This causes a NULL pointer dereference BUG. To fix this, refactor the decoder allocation and de-allocation into helper routines, and in this 'free' routine, check that the decoder, @cxld, is valid before attempting any operations on it. | |||||
| CVE-2022-49894 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix region HPA ordering validation Some regions may not have any address space allocated. Skip them when validating HPA order otherwise a crash like the following may result: devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9 BUG: kernel NULL pointer dereference, address: 0000000000000000 [..] RIP: 0010:store_targetN+0x655/0x1740 [cxl_core] [..] Call Trace: <TASK> kernfs_fop_write_iter+0x144/0x200 vfs_write+0x24a/0x4d0 ksys_write+0x69/0xf0 do_syscall_64+0x3a/0x90 store_targetN+0x655/0x1740: alloc_region_ref at drivers/cxl/core/region.c:676 (inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850 (inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290 (inlined by) attach_target at drivers/cxl/core/region.c:1410 (inlined by) store_targetN at drivers/cxl/core/region.c:1453 | |||||
| CVE-2022-49876 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> | |||||
| CVE-2022-49875 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below: do_pin do_pin_any do_pin_fd mount_bpffs_for_pin strlen(name) <- NULL pointer dereference Fix it by adding validation to the common process. | |||||
| CVE-2022-49869 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible crash in bnxt_hwrm_set_coal() During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb | |||||
| CVE-2022-49864 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram() ./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. | |||||