Total
4140 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-49998 | 1 Linux | 1 Linux Kernel | 2025-01-09 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: improve shutdown sequence Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there. The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove): phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata() But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD. The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid. Both problems have the common aspect that closing the conduit interface solves them. In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point. In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst: | Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands. So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit. The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them. The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up). | |||||
| CVE-2023-52920 | 1 Linux | 1 Linux Kernel | 2025-01-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: support non-r10 register spill/fill to/from stack in precision tracking Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ | |||||
| CVE-2024-26607 | 1 Linux | 1 Linux Kernel | 2025-01-09 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: sii902x: Fix probing race issue A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe(). | |||||
| CVE-2024-42107 | 1 Linux | 1 Linux Kernel | 2025-01-08 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: Don't process extts if PTP is disabled The ice_ptp_extts_event() function can race with ice_ptp_release() and result in a NULL pointer dereference which leads to a kernel panic. Panic occurs because the ice_ptp_extts_event() function calls ptp_clock_event() with a NULL pointer. The ice driver has already released the PTP clock by the time the interrupt for the next external timestamp event occurs. To fix this, modify the ice_ptp_extts_event() function to check the PTP state and bail early if PTP is not ready. | |||||
| CVE-2022-48884 | 1 Linux | 1 Linux Kernel | 2025-01-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca | |||||
| CVE-2021-46964 | 1 Linux | 1 Linux Kernel | 2025-01-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reserve extra IRQ vectors Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs. | |||||
| CVE-2024-26183 | 1 Microsoft | 13 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 10 more | 2025-01-08 | N/A | 6.5 MEDIUM |
| Windows Kerberos Denial of Service Vulnerability | |||||
| CVE-2024-26219 | 1 Microsoft | 9 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 6 more | 2025-01-08 | N/A | 7.5 HIGH |
| HTTP.sys Denial of Service Vulnerability | |||||
| CVE-2024-26855 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. | |||||
| CVE-2024-26717 | 1 Linux | 1 Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid-of: fix NULL-deref on failed power up A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures. | |||||
| CVE-2024-26728 | 1 Linux | 1 Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix null-pointer dereference on edid reading Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08 ---truncated--- | |||||
| CVE-2022-48445 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-01-07 | N/A | 5.5 MEDIUM |
| In telephony service, there is a possible missing permission check. This could lead to local denial of service with no additional execution privileges. | |||||
| CVE-2022-48444 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-01-07 | N/A | 5.5 MEDIUM |
| In telephony service, there is a possible missing permission check. This could lead to local denial of service with no additional execution privileges. | |||||
| CVE-2022-48443 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-01-07 | N/A | 5.5 MEDIUM |
| In telephony service, there is a possible missing permission check. This could lead to local denial of service with no additional execution privileges. | |||||
| CVE-2022-48442 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-01-07 | N/A | 5.5 MEDIUM |
| In dialer service, there is a possible missing permission check. This could lead to local denial of service with no additional execution privileges. | |||||
| CVE-2024-26729 | 1 Linux | 1 Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164) | |||||
| CVE-2024-26738 | 1 Linux | 1 Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. | |||||
| CVE-2024-26754 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-01-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 | |||||
| CVE-2024-26688 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super When configuring a hugetlb filesystem via the fsconfig() syscall, there is a possible NULL dereference in hugetlbfs_fill_super() caused by assigning NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize is non valid. E.g: Taking the following steps: fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC); fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced with NULL, losing its previous value, and we will print an error: ... ... case Opt_pagesize: ps = memparse(param->string, &rest); ctx->hstate = h; if (!ctx->hstate) { pr_err("Unsupported page size %lu MB\n", ps / SZ_1M); return -EINVAL; } return 0; ... ... This is a problem because later on, we will dereference ctxt->hstate in hugetlbfs_fill_super() ... ... sb->s_blocksize = huge_page_size(ctx->hstate); ... ... Causing below Oops. Fix this by replacing cxt->hstate value only when then pagesize is known to be valid. kernel: hugetlbfs: Unsupported page size 0 MB kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0 kernel: Oops: 0000 [#1] PREEMPT SMP PTI kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 kernel: Call Trace: kernel: <TASK> kernel: ? __die_body+0x1a/0x60 kernel: ? page_fault_oops+0x16f/0x4a0 kernel: ? search_bpf_extables+0x65/0x70 kernel: ? fixup_exception+0x22/0x310 kernel: ? exc_page_fault+0x69/0x150 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: ? hugetlbfs_fill_super+0xb4/0x1a0 kernel: ? hugetlbfs_fill_super+0x28/0x1a0 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: vfs_get_super+0x40/0xa0 kernel: ? __pfx_bpf_lsm_capable+0x10/0x10 kernel: vfs_get_tree+0x25/0xd0 kernel: vfs_cmd_create+0x64/0xe0 kernel: __x64_sys_fsconfig+0x395/0x410 kernel: do_syscall_64+0x80/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? exc_page_fault+0x69/0x150 kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76 kernel: RIP: 0033:0x7ffbc0cb87c9 kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48 kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af kernel: RAX: fffffffffff ---truncated--- | |||||
| CVE-2024-26700 | 1 Linux | 1 Linux Kernel | 2025-01-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix MST Null Ptr for RV The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000 ---truncated--- | |||||