Total
3002 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-6564 | 1 Renesas | 1 Arm-trusted-firmware | 2024-11-21 | N/A | 6.7 MEDIUM |
| Buffer overflow in "rcar_dev_init" due to using due to using untrusted data (rcar_image_number) as a loop counter before verifying it against RCAR_MAX_BL3X_IMAGE. This could lead to a full bypass of secure boot. | |||||
| CVE-2024-6563 | 1 Renesas | 1 Arm-trusted-firmware | 2024-11-21 | N/A | 7.5 HIGH |
| Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Renesas arm-trusted-firmware allows Local Execution of Code. This vulnerability is associated with program files https://github.Com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.5/drivers/renesas/common/io/i... https://github.Com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.5/drivers/renesas/common/io/io_rcar.C . In line 313 "addr_loaded_cnt" is checked not to be "CHECK_IMAGE_AREA_CNT" (5) or larger, this check does not halt the function. Immediately after (line 317) there will be an overflow in the buffer and the value of "dst" will be written to the area immediately after the buffer, which is "addr_loaded_cnt". This will allow an attacker to freely control the value of "addr_loaded_cnt" and thus control the destination of the write immediately after (line 318). The write in line 318 will then be fully controlled by said attacker, with whichever address and whichever value ("len") they desire. | |||||
| CVE-2024-6143 | 1 Actiontec | 2 Wcb6200q, Wcb6200q Firmware | 2024-11-21 | N/A | 8.8 HIGH |
| Actiontec WCB6200Q uh_tcp_recv_header Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21414. | |||||
| CVE-2024-6142 | 1 Actiontec | 2 Wcb6200q, Wcb6200q Firmware | 2024-11-21 | N/A | 8.8 HIGH |
| Actiontec WCB6200Q uh_tcp_recv_content Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Actiontec WCB6200Q routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP server. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length buffer. An attacker can leverage this vulnerability to execute code in the context of the HTTP server. Was ZDI-CAN-21410. | |||||
| CVE-2024-5564 | 2024-11-21 | N/A | 8.1 HIGH | ||
| A vulnerability was found in libndp. This flaw allows a local malicious user to cause a buffer overflow in NetworkManager, triggered by sending a malformed IPv6 router advertisement packet. This issue occurred as libndp was not correctly validating the route length information. | |||||
| CVE-2024-5305 | 1 Tungstenautomation | 1 Kofax Power Pdf | 2024-11-21 | N/A | 7.8 HIGH |
| Kofax Power PDF PDF File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22921. | |||||
| CVE-2024-5243 | 2024-11-21 | N/A | 7.5 HIGH | ||
| TP-Link Omada ER605 Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DNS names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22523. | |||||
| CVE-2024-4640 | 1 Moxa | 8 Oncell G3470a-lte-eu, Oncell G3470a-lte-eu-t, Oncell G3470a-lte-eu-t Firmware and 5 more | 2024-11-21 | N/A | 7.1 HIGH |
| OnCell G3470A-LTE Series firmware versions v1.7.7 and prior have been identified as vulnerable due to missing bounds checking on buffer operations. An attacker could write past the boundaries of allocated buffer regions in memory, causing a program crash. | |||||
| CVE-2024-4511 | 2024-11-21 | 5.8 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability classified as critical has been found in Shanghai Sunfull Automation BACnet Server HMI1002-ARM 2.0.4. This affects an unknown part of the component Message Handler. The manipulation leads to buffer overflow. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-263115. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-4143 | 2024-11-21 | N/A | 9.8 CRITICAL | ||
| A potential security vulnerability has been identified in certain HP PC products using AMI BIOS, which might allow arbitrary code execution. AMI has released firmware updates to mitigate this vulnerability. | |||||
| CVE-2024-4020 | 2024-11-21 | 9.0 HIGH | 8.8 HIGH | ||
| A vulnerability was found in Tenda FH1206 1.2.0.8(8155) and classified as critical. This issue affects the function fromAddressNat of the file /goform/addressNat. The manipulation of the argument entrys leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261671. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-42040 | 2024-11-21 | N/A | 8.1 HIGH | ||
| Buffer Overflow vulnerability in the net/bootp.c in DENEX U-Boot from its initial commit in 2002 (3861aa5) up to today on any platform allows an attacker on the local network to leak memory from four up to 32 bytes of memory stored behind the packet to the network depending on the later use of DHCP-provided parameters via crafted DHCP responses. | |||||
| CVE-2024-41464 | 1 Tendacn | 2 Fh1201, Fh1201 Firmware | 2024-11-21 | N/A | 7.5 HIGH |
| Tenda FH1201 v1.2.0.14 was discovered to contain a stack-based buffer overflow vulnerability via the mitInterface parameter in ip/goform/RouteStatic | |||||
| CVE-2024-41039 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix overflow checking of wmfw header Fix the checking that firmware file buffer is large enough for the wmfw header, to prevent overrunning the buffer. The original code tested that the firmware data buffer contained enough bytes for the sums of the size of the structs wmfw_header + wmfw_adsp1_sizes + wmfw_footer But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and Halo Core the equivalent struct is wmfw_adsp2_sizes, which is 4 bytes longer. So the length check didn't guarantee that there are enough bytes in the firmware buffer for a header with wmfw_adsp2_sizes. This patch splits the length check into three separate parts. Each of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked separately before they are used. | |||||
| CVE-2024-41038 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs. | |||||
| CVE-2024-40902 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: xattr: fix buffer overflow for invalid xattr When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log. | |||||
| CVE-2024-40415 | 1 Tenda | 2 Ax1806, Ax1806 Firmware | 2024-11-21 | N/A | 9.8 CRITICAL |
| A vulnerability in /goform/SetStaticRouteCfg in the sub_519F4 function in Tenda AX1806 1.0.0.1 firmware leads to stack-based buffer overflow. | |||||
| CVE-2024-40130 | 1 Open5gs | 1 Open5gs | 2024-11-21 | N/A | 9.8 CRITICAL |
| open5gs v2.6.4 is vulnerable to Buffer Overflow. via /lib/core/abts.c. | |||||
| CVE-2024-3871 | 2024-11-21 | N/A | 9.8 CRITICAL | ||
| The Delta Electronics DVW-W02W2-E2 devices expose a web administration interface to users. This interface implements multiple features that are affected by command injections and stack overflows vulnerabilities. Successful exploitation of these flaws would allow remote unauthenticated attackers to gain remote code execution with elevated privileges on the affected devices. This issue affects DVW-W02W2-E2 through version 2.5.2. | |||||
| CVE-2024-39543 | 2024-11-21 | N/A | 6.5 MEDIUM | ||
| A Buffer Copy without Checking Size of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, adjacent attacker to send specific RPKI-RTR packets resulting in a crash, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects Junos OS: * All versions before 21.2R3-S8, * from 21.4 before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R2. Junos OS Evolved: * All versions before 21.2R3-S8-EVO, * from 21.4 before 21.4R3-S8-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S2-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R2-EVO. | |||||