Total
191 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8218 | 1 Tp-link | 4 C2, C20i, C20i Firmware and 1 more | 2025-04-20 | 10.0 HIGH | 9.8 CRITICAL |
| vsftpd on TP-Link C2 and C20i devices through firmware 0.9.1 4.2 v0032.0 Build 160706 Rel.37961n has a backdoor admin account with the 1234 password, a backdoor guest account with the guest password, and a backdoor test account with the test password. | |||||
| CVE-2017-6686 | 1 Cisco | 1 Ultra Services Framework Element Manager | 2025-04-20 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker with access to the management network to log in as an admin or oper user of the affected device, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76699. Known Affected Releases: 21.0.0. | |||||
| CVE-2017-7964 | 1 Zyxel | 1 Wre6505 Firmware | 2025-04-20 | 10.0 HIGH | 10.0 CRITICAL |
| Zyxel WRE6505 devices have a default TELNET password of 1234 for the root and admin accounts, which makes it easier for remote attackers to conduct DNS hijacking attacks by reconfiguring the built-in dnshijacker process. | |||||
| CVE-2017-5178 | 1 Schneider-electric | 3 Tableau Desktop, Tableau Server, Wonderware Intelligence | 2025-04-20 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered in Schneider Electric Tableau Server/Desktop Versions 7.0 to 10.1.3 in Wonderware Intelligence Versions 2014R3 and prior. These versions contain a system account that is installed by default. The default system account is difficult to configure with non-default credentials after installation, and changing the default credentials in the embedded Tableau Server is not documented. If Tableau Server is used with Windows integrated security (Active Directory), the software is not vulnerable. However, when Tableau Server is used with local authentication mode, the software is vulnerable. The default system account could be used to gain unauthorized access. | |||||
| CVE-2017-6689 | 1 Cisco | 1 Elastic Services Controller | 2025-04-20 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in the ConfD CLI of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the admin user, aka an Insecure Default Administrator Credentials Vulnerability. More Information: CSCvc76661. Known Affected Releases: 2.2(9.76). | |||||
| CVE-2025-2442 | 2025-04-09 | N/A | 6.8 MEDIUM | ||
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could potentially lead to unauthorized access which could result in the loss of confidentially, integrity and availability when a malicious user, having physical access, sets the radio to the factory default mode. | |||||
| CVE-2025-2441 | 2025-04-09 | N/A | 4.6 MEDIUM | ||
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could lead to loss of confidentiality when a malicious user, having physical access, sets the radio in factory default mode where the product does not correctly initialize all data. | |||||
| CVE-2025-27443 | 2025-04-08 | N/A | 2.8 LOW | ||
| Insecure default variable initialization in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a loss of integrity via local access. | |||||
| CVE-2025-29985 | 2025-04-08 | N/A | 6.5 MEDIUM | ||
| Dell Common Event Enabler, version(s) CEE 9.0.0.0, contain(s) an Initialization of a Resource with an Insecure Default vulnerability in the Common Anti-Virus Agent (CAVA). An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | |||||
| CVE-2025-27809 | 2025-03-27 | N/A | 5.4 MEDIUM | ||
| Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname. | |||||
| CVE-2024-8313 | 2025-03-27 | N/A | N/A | ||
| An Exposure of Sensitive System Information to an Unauthorized Control Sphere and Initialization of a Resource with an Insecure Default vulnerability in the SNMP component of B&R APROL <4.4-00P5 may allow an unauthenticated adjacent-based attacker to read and alter configuration using SNMP. | |||||
| CVE-2024-41995 | 2025-03-24 | N/A | 7.5 HIGH | ||
| Initialization of a resource with an insecure default vulnerability exists in JavaTM Platform Ver.12.89 and earlier. If this vulnerability is exploited, the product may be affected by some known TLS1.0 and TLS1.1 vulnerabilities. As for the specific products/models/versions of MFPs and printers that contain JavaTM Platform, see the information provided by the vendor. | |||||
| CVE-2024-41975 | 2025-03-18 | N/A | 5.3 MEDIUM | ||
| An unauthenticated remote attacker can gain limited information of the PLC network but the user management of the PLCs prevents the actual access to the PLCs. | |||||
| CVE-2025-1960 | 2025-03-13 | N/A | 9.8 CRITICAL | ||
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could cause an attacker to execute unauthorized commands when a system’s default password credentials have not been changed on first use. The default username is not displayed correctly in the WebHMI interface. | |||||
| CVE-2025-2129 | 2025-03-09 | 5.1 MEDIUM | 5.6 MEDIUM | ||
| A vulnerability was found in Mage AI 0.9.75. It has been classified as problematic. This affects an unknown part. The manipulation leads to insecure default initialization of resource. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. After 7 months of repeated follow-ups by the researcher, Mage AI has decided to not accept this issue as a valid security vulnerability and has confirmed that they will not be addressing it. | |||||
| CVE-2024-50390 | 2025-03-07 | N/A | N/A | ||
| A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.5.032 and later | |||||
| CVE-2024-0387 | 1 Moxa | 14 Eds-4008, Eds-4008 Firmware, Eds-4009 and 11 more | 2025-02-25 | N/A | 6.5 MEDIUM |
| The EDS-4000/G4000 Series prior to version 3.2 includes IP forwarding capabilities that users cannot deactivate. An attacker may be able to send requests to the product and have it forwarded to the target. An attacker can bypass access controls or hide the source of malicious requests. | |||||
| CVE-2022-2196 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-13 | N/A | 5.8 MEDIUM |
| A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or past commit 2e7eab81425a | |||||
| CVE-2022-38745 | 1 Apache | 1 Openoffice | 2025-02-13 | N/A | 7.8 HIGH |
| Apache OpenOffice versions before 4.1.14 may be configured to add an empty entry to the Java class path. This may lead to run arbitrary Java code from the current directory. | |||||
| CVE-2024-32114 | 1 Apache | 1 Activemq | 2025-02-11 | N/A | 8.5 HIGH |
| In Apache ActiveMQ 6.x, the default configuration doesn't secure the API web context (where the Jolokia JMX REST API and the Message REST API are located). It means that anyone can use these layers without any required authentication. Potentially, anyone can interact with the broker (using Jolokia JMX REST API) and/or produce/consume messages or purge/delete destinations (using the Message REST API). To mitigate, users can update the default conf/jetty.xml configuration file to add authentication requirement: <bean id="securityConstraintMapping" class="org.eclipse.jetty.security.ConstraintMapping"> <property name="constraint" ref="securityConstraint" /> <property name="pathSpec" value="/" /> </bean> Or we encourage users to upgrade to Apache ActiveMQ 6.1.2 where the default configuration has been updated with authentication by default. | |||||